|
| 1 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for laying of CI / GI pipes laying in trenches and getting out in soft/loose soil, complete all as specified and directed by Engr-in-Charge. |
| 2 | Returning, filling in trenches including , leveling watering and well ramming in layers not exc 25 cm in soft / loose soil, complete all as specified and directed by Engr-in-Charge. |
| 3 | Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point, complete all as specified and directed by Engr-in-Charge. |
| 4 | Material & Labour for Galvanised Iron Pipe 20mm dia medium grade galvanised with all fittings and fixed complete laid as in trenches / floor including taking down of existing pipes, complete all as specified and directed by Engr-in-Charge. |
| 5 | All as per ser item No. 4.00 here in before but 25mm dia pipe, complete all as specified and directed by Engr-in-Charge. |
| 6 | All as per ser item No. 4.00 here in before but 40mm dia pipe, complete all as specified and directed by Engr-in-Charge. |
| 7 | All as per ser item No. 4.00 here in before but 50mm dia pipe, complete all as specified and directed by Engr-in-Charge. |
| 8 | All as per ser item No. 4.00 here in before but 80mm dia pipe, complete all as specified and directed by Engr-in-Charge. |
| 9 | Supply & fixing centrifugally 100mm cast (spun) ductile iron pressure pipes with socket & spigot ends having ISI stamping marking with IS 8329/2000 classification K7, In standard length of 5.5 - 6 mtr suitable for and including push on joint (gassket D jointing) with cement mortar lining in the pipes including taking out GI/DI pipe, complete all as specified and directed. |
| 10 | All as per ser item No. 9.00 here in before but 150mm dia pipe, complete all as specified and directed by Engr-in-Charge. |
| 11 | Supply & fixing in repairs DI fittings for flanged & spigot socketed pipe e.g. bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces, collars, caps and plugs conforming to IS of size upto 200/150/100 mm bore, complete all as specified and directed. |
| 12 | Supply and fix in repairs Gun Metal gate valve with Iron wheel head screwed both ends for GI steel tubing 20mm dia, complete all as specified and directed by Engr-in-Charge. |
| 13 | All as per ser item No. 12.00 here in before but 25mm dia, complete all as specified and directed by Engr-in-Charge. |
| 14 | All as per ser item No. 12.00 here in before but 40mm dia, complete all as specified and directed by Engr-in-Charge. |
| 15 | All as per ser item No. 12.00 here in before but 50mm dia, complete all as specified and directed by Engr-in-Charge. |
| 16 | Supply & fix cast iron sluice valve 100mm dia, flanged ends, stem (spindle) of SS (forged) and check nut of gun metal, PN rating 1.6, working parts conforming to IS :14846, and flanged ends having drilling as per IS:1538 including taking down old unserviceable sluice valve, complete all as specified and directed by Engr-in-Charge. |
| 17 | Painting of CI/DI/GI pipes of size 100/150/200 mm, MS pit cover with two coats of synthetic enamel paint over one coat of red oxide primer after scratching the existing paint properly and cleaning the surface properly. complete all as specified and directed by Engineer-in-charge. |
| 18 | Supply and fix in replacement of unserviceable Pressure gauge 100mm dia with ball valve of pressure 0-21 Kg/Sqcm with matching thread of specification, complete all as specified and directed by Engineer-in-charge. |
| 19 | M&L in repairs for fixing & jointing cast iron non return (reflux)/ valve ISI marked, flanged ends, class PN 1.6 with flanged and drilled ends suitable for 150mm nominal bore pipe complete with all acessories & including joints and jointing material such as bolts, nuts, washers and rubber gaskets, complete all as specified and directed by Engineer-in-charge. |
| 20 | M&L in repairs for fixing & jointing Cast Iron Air release valve ISI marked, flanged ends, class PN 1.6 with flanged and drilled ends suitable for upto 150mm nominal bore pipe complete with all acessories & including joints and jointing material such as bolts, nuts, washers and rubber gaskets, complete all as specified and directed by Engineer-in-charge. |
| 21 | Dismantling and taking up submersible pumps set of any capacity and any size from bore well with the help of chain pulley block including dismaintling the MS/GI column pipe up to 115 mtr and electrical mechanical connection transportation from site to authorised workshop at Ambala /Chandigarh for carrying out necessary repairs /replacement of defective / worn out parts and back to site, lowering the submercible pump set in to borewell after testing including connecting coulmn pipe and cable connection etc, after completion of the work testing of pump set on load to the entire satisfaction of Engr-in-Charge and reading the data complete. Note :- (i) T&P required for raising & lowering, the pumps and pipes will be arranged by contractor and the cost deemed to be included in the unit rate quoted by the contrator for this items.(ii) Small items such as nuts, bolts washers and rubber gasket required will be included in the item rate.(iii) Spare parts for repair will be measured and paid separately. |
| 22 | Strip opening of Pump set complete of Capacity upto 41 HP and removing scales, cleaning serviceable parts and re-assembling after carrying out repairs / replacement of worn out parts including seals, 'o'rings, washers, nuts and bolts all as per site required and making the pump set fully serviceable and testing to the entire satisfaction of Engr-in-charge complete all as specified and directed. Note :- (i) All damaged / old / unservicable Spares parts for replacement will be deemed to be included in rate quoted against this item.(ii) Replacement of all other items such as seals, 'o'ring , washers, nuts and bolts will be deemed to be included in rate quoted against this item. |
| 23 | Material and labour strip for opening of submersible motor capacity upto 41HP pumping set and taking out burnt copper conductor and cleaning of stator and rotor surfaces and carrying out new re-winding with existing size, and weight gauge / suitable size and weight of copper conductor and providing new insulating material of 'F' class insulation, heating varnishing, drying through electric furnance and testing on specified load, complete all as specified & directed by Engr-in-Charge. |
| 24 | Supply, lowering, jointing, testing and commissioning GI pipe heavy duty 100mm internal dia (3 mtr long with both ends threaded and fitted with heavy duty MS flanges 14mm thick, two Nos groves for submersible cable continuous welded and drilled 4 Nos hole, complete as column pipe including jointing material such as bolts, nuts, washers and rubber gasket etc, complete all as specified & directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 25 | Supply, lowering, jointing, testing and commissioning GI pipe heavy duty 100mm internal dia (3 mtr long with both ends threaded and fitted with heavy duty MS flanges 14mm thick, two Nos groves for submersible cable continuous welded and drilled 4 Nos hole, complete as column pipe including jointing material such as bolts, nuts, washers and rubber gasket etc, complete all as specified & directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
