|
| 1 | Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and directed. |
| 2 | Dismantling boarding, any description, fixed in any position with screws etc complete all as specified and directed. |
| 3 | S&F factory made ready to install, non toxic-lead & cadmium free , single extruded, 3 side prelam, solid (non hollow) WPC door frame (single rebated) of size 75X50 mm and having water proof, termite proof, fire retardant and with excellent screw holding capacity, mitred cut at two corners and joined with MS screws on each side and fixed to the existing wall using (10X100mm) long MS screws to through the frame by using PVC fastners, minimum 4 Nos of MS screws to be provided for each vertical post and minimum 2 Nos MS screws to be provided on horizontal members complete all as specified and directed. |
| 4 | S&F 18mm thick, factory made ready to install, Non-toxic, Lead & Cadmium free, single extruded, water proof, termite proof, fire retardant, excellent screw holding capacity, solid PVC board, one side decorative choice lamination and other side balancing white as in cupboard shutter, fixed to door frame with and cold rolled nickel plated steel 'O' crank soft closing concealed hinge (15-22mm) 8 Nos for bottom portion 4 Nos for loft above including necessary fixing arrangement, bright finish or Electrogalvanized and width of flaps 40mm (when open) and stainless steel screw complete all as specified and directed. |
| 5 | S&F 18mm thick, factory made ready to install, Non-toxic, Lead& Cadmium free, single extruded, water proof, Termite proof, fire retardant, excellent screw holding capacity, solid PVC board, one side decorative choice lamination and other side balancing white as in cupboard shelves fixed to and including PVC guide rail suitable size and stainless steel screw complete all as specified and directed. |
| 6 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land distance exc 5 km but not exceeding 15 Km complete all as specified and directed |
| 7 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 8 | M & L for preparing newly plastered surfaces of internal walls, etc by \\"Vacuum based sanding machine\\" and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over a coat of alkali resistant primer by \\"Auto Roller\\" machine complete all as specified and directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land distance exc 5 km but not exceeding 15 Km complete all as specified and directed. |
| 10 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 11 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, as in vertical surfaces such as skirting etc, including 10 mm thick screed bed in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 12 | M & L for Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 13 | M & L for Vitrified, designed, light shade coloured, tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm as in vertical surfaces such as skirting,dado, etc including 10 mm thick bedding in cement mortar 1:4 and necessary cutting of tiles complete all as specified and directed. |
| 14 | S&F in repair 20 mm bore, Stainless Steel, tubular towel rod, D type, 30 cm long between flanges with brackets as in hanger fixed inside cupboard complete all as specified and directed |
| 15 | S & F in repairs 25 mm dia, stainless steel, fancy curtain rod, heavy duty, including stainless steel bracket of superior quality for each as in coat hanger complete all as specified and directed. |
| 16 | S & F in repair 150 mm size, stainless steel designer pull handle, fabricated type polished complete all as specified and directed. |
| 17 | S & F in repair 100 mm size, stainless steel designer pull handle, fabricated type polished complete all as specified and directed. |
| 18 | S & F in repair magnetic catch with striking plate, 40mm size superior quality complete all as specified and directed. |
| 19 | S & F in repair 100 mm size Hasp and staple, safety type, stainless steel with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 20 | M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 21 | M & L for post construction Antitermite treatment by treating At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 22 | M&L for preparation of old decorated, damp affected wall surface by complete removal of existing treatment, washing, rubbing, stopping etc and apply the following treatments :- (a) Apply injection sealer by providing holes of 6mm dia and 50 mm deep at an angle of 45 degree. (b) Apply a coat of advance dammp proof protective wall sealer (c) Apply one or more coat of water proof putty to a smooth surface including making good any undulations on the surfaces (d) Apply a coat of acylic primer over the putty surface (e) Two coats of oil bound washable distemper complete all as specified and as directed. Make : Berger,Asian Paint, J&N ,Shalimar Note :- (i) Painting work shall be carried out according to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for a clean environment certified by the Paint manufacturer) |
| 23 | S & F in repair 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter of cup-board shelf, etc complete all as specified and as directed. |
| 24 | S & F in repairs 6 mm thick, for external teak wood lipping to Plywood/particle board etc 18/19mm thick, fixed with nails and polishing the lipping complete all as specified and directed. |
| 25 | S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed. |
| 26 | S & F in repairs cold rolled nickel plated steel O crank soft closing concealed hinge (15-22mm) including necessary fixing arrangement to shutter complete all as specified and directed. Please Enable Macros to View BoQ information |
