Tender For Special Repairs To Tolet Block And Roof Sheet At Aps K Tee, Upgradation Of Bldg No. P-294 Under K Tee, Construction Of Concrete Stage At Fort Area Nagpur And special Repair To Street Light And Allied E/M Works At Army Public School Under G
Tender Value
26.50 Lakhs
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
53000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamptee → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Tolet Block And Roof Sheet At Aps K Tee, Upgradation Of Bldg No. P-294 Under K Tee, Construction Of Concrete Stage At Fort Area Nagpur And special Repair To Street Light And Allied E/M Works At Army Public School Under Ge K Tee.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 2 | Material and labour for 0.50 mm thick pre-painted galvalume aluminium zinc coating G.I. based corrugated steel sheet (AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type bolt complete all as specified and as directed. |
| 3 | Material and labour for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type bolt complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar beading (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. |
| 5 | Material and labour for coloured non skid ceramic premium quality tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 6 | Material and labour for glazed ceramic coloured premium quality tiles 300mm x 450mm, on vertical surface such as skirting/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in Cement Mortar 1:3 finished even and fair complete all as specified and as directed. |
| 7 | Taking down door / window frame with shutter (without taking of shutter from the frame) area n. exc 1.50 sqm complete all as specified and directed. |
| 8 | Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, in opening complete as per specified and as directed. |
| 9 | Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 10 | M&L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 11 | Supply and fix 100 mm long stainless steel butt hinges and fixed with screw/welded to frames etc complete all as specified and as directed.Note: Sample and design as approved by GE. |
| 12 | Supply and fixing 150mm aluminium barrel tower bolts, fixed complete all as specified and as directed.Note: Sample and design as approved by GE. |
| 13 | Supply and fixing 125 mm aluminium pressed handles, fixed complete all as specified and as directed.Note: Sample and design as approved by GE. |
| 14 | Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 15 | Supply & fixed in vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and as directed. |
| 16 | Supply and fix in repairs 10 litre capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and as directed. |
| 17 | Supply and fix in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 18 | Supply and fix in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed, complete all as specified and as directed. |
| 19 | Supply and fix in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed. |
| 20 | Supply and fix in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed. |
| 21 | Supply and fix in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed. |
| 22 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets, complete all as specified and directed. |
| 23 | M&L for 4mm thick Non-asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed |
| 24 | M&L for fixing only Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed |
| 25 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 26 | M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. |
| 27 | M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed |
| 28 | Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 29 | Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed. |
| 30 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed |
| 31 | S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed. |
| 32 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 33 | Supply & fixing 150 mm Aluminium pressed handles fixed complete all as specified and directed. |
| 34 | S&F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as specified and as directed. (thickness or powder coating not less than 50 micron) |
| 35 | S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 36 | S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specified and directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 37 | S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 38 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed. |
| 39 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 40 | Materials and labour for light shade vitrified ceramic tiles 7-10mm thick (square/rectangular), polished, area of each tiles n.exc 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed. |
| 41 | Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles n.exc 0.36 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. |
| 42 | Demolition of stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc complete all as specified and directed |
| 43 | S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as directed. |
| 44 | Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 45 | M&L 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in subbase complete all as specified and as directed. |
| 46 | M&L for chequered tiles rubber pressed glossy finish (any colour) 40 cm x 40 cm x 35 mm thk ,set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 50 mm screed bedding in cement mortar (1:4) complete all as specified and directed |
| 47 | Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed |
| 48 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 49 | Material & labour for Rendering 15 mm thick on brick or concrete surfaces in CM 1:4 using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.(WPC shall be measured and paid separately.) |
| 50 | Supply only liquid water proofing compound complete all as specified and directed. |
| 51 | M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 52 | M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed. |
| 53 | M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed. |
| 54 | M&L for applying two or more coats of 100% premium acyrlic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, alkali & fungal resistance, dirt resistance exterior paint of reqd shade with silicon additives @ 1.43 ltr / 10 Sqm over and including priming coat of exterior primer applied @0.90 ltr / 10sqm over new surface incl prep of surface complete all as specified and directed |
| 55 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed |
| 56 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing or removal to store complete all as specified and directed |
| 57 | Supplying and laying of CPVC pipes 16 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 58 | Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 59 | S & F Brass elbow 16 mm for CPVC Pipes complete all as specified and directed |
| 60 | S & F Brass Elbow 20 mm for CPVC Pipes complete all as specified and directed |
| 61 | S & F Brass Tee 16 mm for CPVC Pipes complete all as specified and directed |
| 62 | S & F Brass Tee 20 mm for CPVC Pipes complete all as specified and directed |
| 63 | S & F Brass union 16 mm for CPVC Pipes complete all as specified and directed |
| 64 | S & F Brass union 20 mm for CPVC Pipes complete all as specified and directed |
| 65 | Supply & fixed in repairs vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device,complete all as specified and directed. |
| 66 | S&F in repairs 32 mm dia PVC waste pipe fixed complete all as specified and as directed. |
| 67 | S&F in repair Vitreous China wash basin, white,with padestal flat back, size 540x400mm excluding ditto but including brackets and padestal etc all as specified and directed. |
| 68 | S&F White vitreous china laboratory sink size size 600x450x200mm complete all as specified and directed |
| 69 | S&F in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and as directed. |
| 70 | S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. |
| 71 | S&F in repair Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,fancy type screwed for iron pipe and fixed, complete all as specified and directed. |
| 72 | S&F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete all as specified and directed. |
| 73 | S&F in repairs stop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and as directed. |
| 74 | S&F in repairs 2-way bib cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed. |
| 75 | S & F Health faucet (ABS Body) mild steel chromium plated suitable 15 mm dia pipe with 1.25 mtr long flexible tube and ABC Wall hook including making connection and fixed in position complete all as specified and directed. |
| 76 | S &F Tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed. |
| 77 | S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed. |
| 78 | S & F waste fitting, 32 mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and as directed. |
| 79 | S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specifed and directed complete all as specifed and directed. |
| 80 | S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 81 | S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets,stops,rollers etc complete all as specified and as directed. |
| 82 | Surface dressing n.exc 15 cm deep in soft /loose soil including Clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth Complete all as specified and as directed. |
| 83 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation etc, n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 84 | Returning, filling in soils including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick complete all as specified and as directed. |
| 85 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 86 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 87 | M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface all as specified and as directed. |
| 88 | Material and labour for cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation filling and mass concrete all as specified and as directed. |
| 89 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 90 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth withot using extra cement. |
| 91 | M&L for Preparing new plastered surface and applying two coat weather shield paint (appex) over a coat of primer complete all as specified and directed. |
| 92 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 complete all as specified and directed |
| 93 | M & L for Rounding to edges of stone slabs one edge , such as in steps ,cooking platforms, and other similar situations complete all as specified and directed. |
| 94 | M & L for providing 25 mm thick PCC 1:2:4 Type B-2 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as directed. |
| 95 | M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed |
| 96 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection including GI bend ,clamps all misc accessories complete all as specified and as directed. |
| 97 | Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including fixing arrangement as required all as specified and as directed. |
| 98 | S & F Bracket made out of GI tubing medium grade 40 mm bore , 90 cm long including MS clamps made out of MS flat iron 25 x 10 mm , nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed. |
| 99 | Supply & Fix Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) complete all as specified and as directed. |
| 100 | Supply & fixing of 3 core 1.5 Sqmm PVC insulated PVC sheathed copper cable for connection of Street light fittings & Flood Light Fittings from Junction box to Fitting alongwith PVC Conduit as required complete all as specified and as directed. |
| 101 | Supply and fixing of PVC Junction box of size 270 x 225 x 135 mm, light weight pole mounting hinged type including necessary clamp for MCB mounting and mounting of Box on pole/pipe with MS flat frame arrangement and necessary connector for looping in and looping out cable connection and suitable glands incl MCB SP 6 Amp complete all as specified and as directed. |
| 102 | M&L for PCC 1:2:4 ( using 20mm graded stone aggregate) type B1 as in coping of poles complete all as specified and as directed |
| 103 | M&L for PCC 1:2:4 ( using 40mm graded stone aggregate) type B2 of PCC for foundation of poles complete all as specified and as directed. |
| 104 | Supply,testing, laying & commissioning of XLPE insulated, armoured (heavy duty) electric cable with aluminium stranded conductor, 1100 volts grade, 2 core 10 sqmm laid in trenches / duct/ fixed to wall with suitable size clamps / passing through pipe/Tunnel/under ground/surface up to the termination point(as directed by Engr-in-Charge) and cable end terminations crimped with suitable size cable lugs, cable glands with tool,nuts,bolts etc and connecting end terminations to DBs/LT panel/Busbar etc complete all as specified and as directed. |
| 105 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/loose soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as specified and as directed. |
| 106 | S&F of HDPE double wall corrugated pipe confirming to IS -14930 Part with IP protection IP-67 having Outer dia 50 mm complete terminated up to termination end point complete all as specified and as directed. |
| 107 | M&L for Boring on road using trenchless technology minimum 2feet depth along with providing HDPE pipe of size minimum 80mm(as Suitable) having pressure rating PN 16 complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 108 | M&L for Boring on road using trenchless technology minimum 2feet depth along with providing HDPE pipe of size minimum 80mm(as Suitable) having pressure rating PN 16 complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender