|
| 1 | Taking down carefully existing aluminium or copper point wiring (light, fan, socket, bell or power) including all associated fixtures and fittings such as switches, ceiling roses, regulators, sockets, lamp/angle holder etc and making good the disturbed surfaces to an even and smooth finish using cement mortar 1:3 and applying white/colour wash to match the existing surface complete all as specified and directed. |
| 2 | S&F for point wiring complete one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including surface type caping & casing not less than 25 mm wide, including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable of green colour as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete all as specified and directed. |
| 3 | S&F in replacement switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and directed. |
| 4 | S&F in replacement LED Building security light 20/25 Watt with high power LED source (>120 lumen/watt) PDC housing, IP66 and IK 10 with 4 KV inbuilt surge protection, minimum 50000 burning hours hv cut off @325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. |
| 5 | S&F in replacement of bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 9/10 W LED, 6000K, 100 lumens/watt including inbuilt electronic driver complete all as specified and directed. |
| 6 | S&F in replacement of Smart Glow 2x2 PANEL SENSOR LIGHT recessed/surface type is an intelligent office lighting system with an inbuilt sensor thus avoids unwanted hassle of creating space for sensors. The inbuilt sensor helps save additional 40%* energy as compared to other LED panels. The luminaire also provide 360Deg coverage around 8 ft area, High on aesthetics, Smart Glow delivers superior performance, is easy to install and has a long life of 50,000 hours (L70B50). It also has very good payback period of less than 1.5 years, System wattage: 37W with system lumen of 3700lm, system efficacy>100lm/watt, Housing made with CRCA material, high transmittance PC diffuser to provide uniform light intensity distribution, IP20, THD<10%, available CCT: 4000K/5700K/6500K, CRI>80, PF>0.90, Operating voltage: 220-240Vac at rated frequency of 50Hz. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Both the fixture and Driver should have separate BIS approval. including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. |
| 7 | S&F in replacement LED 35-40 watt light pureline slim suspended 50mm with suspended (hanging type) accessories CRCA WHITE POWDER COATED, 50000 BURNIG HOURS, IP20 and LK02 linear lighting luminaries with superior white powder coated finish, multiply option options of lights distrubution run length and luman packages for diffrent application to choose white colour higher energy saving decorative ultra slim square profile LED lighting fixture enviromental friendly, energy efficient complete all as specified and directed. |
| 8 | S&F in replacement LED building security light of 35/36W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK10, Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED >120Lm/W, CRI≥70, CCT-5700K, & SDCM<5.minimum 50000 burning hours Powered by built-in potted LED driver of same make gives constant light over wide voltage range shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 32/40 mm dia 1.20 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed. |
| 9 | S&F in replacement PVC gang box 1 way, suitable for fitted piano type 6A switch, 230 Volts complete with pvc gitties and screws complete all as specified and directed. |
| 10 | S&F in replacement switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and directed. |
| 11 | S&F in repair PVC casing and caping, 15/20 mm wide complete all as specified and directed. |
| 12 | S&F in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed. |
| 13 | S&F in replacement GI bracket for street light fittings fabricated with GI tubing 32/40mm dia light grade 1.20m long and bending to angle of 120 degree including mild steel clamp of suitable size and nut bolts with two coat aluminium paint suitable for fixing on PCC/steel poles complete all as specified and directed. |
| 14 | S&F in replacement integrated LED type Post top lantern with high power 25/30 W LED Warm/day cool as required and IP 65 and IK 05 with 4 KV Surge protection as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution, spun aluminium landscape lumainaire incl LED driver suitable for 40/50 mm GI Pipe including all necessary fixing accessories with nuts, bolt complete all as specified and as directed. |
| 15 | S&F in replacement integrated LED type Post top lantern with high power 40/45 W LED Warm/day cool as required and IP 65 and IK 05 with 4 KV Surge protection as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun aluminium landscape lumainaire incl LED driver suitable for 40/50 mm GI Pipe and including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts, bolt and Incl GI pipe 40mm dia 0.45mtr long fixed in gate pole with PCC 1:2:4, type B1 (using 20mm graded stone aggreaget) of 0.20 mtr height and size of existing gate pole and all Earth work complete all as specified and directed. |
| 16 | S&F in replacement of super bright LED (2X2), 36 W, 6500 K recess/surface mounting minimum 100Lumens/watt IP20 ,IK02 PF>.9 and 4kv inbuilt surg protection with high efficent LED source complete all as specified and directed. |
| 17 | S&F 45 W pressure Die cast aluminium housing building secuirity tlight with system lumen of 6300 lm & system efficacy of 140Im/W, IP66, IK10, Single piece die cast including spigot, dia 48-76mm, LED Lifetime (L70B50) 75K Hrs with integrated optical cover. Streetlight should have standalone lighting control system with AUTO on/off based on Dusk/Dawn timings, preset time setting with monthly variation(Jan to Dec.), inbuilt Real time clock for switching, includes dimming profile for energy savings, drift not exceeding max 2mins per year, clock retention upto five years, auto switching off secondary power for module, dimmable driver based on PWM control, dim to off with High/Low Voltage cut off with 440V protection for 8 hrs for complete luminaire including driver and Astro module, EMI/EMC complaint as per EN55015,IEC61547.surge protection as per IEC 61000-4-5,driver meeting IEC61347,complete luminaire meeting IEC60598-2-3-2002, Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and driver should be of same make & must have separate BIS approval complete all as specified and directed. |
| 18 | S&F in replacement integrated LED type Bollard , 10/12 W LED as light source, IP 65,IK 07 minimum hieght 750mm AL PIPE HOUSING , PF0.95 AND SBD 4KV energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution incl LED driver with base plate and pcc and earth work for grouting the light complete and incl neceesary electrical connection complete all as specified and directed. |
| 19 | S&F Solar Integral AIO Post top luminaire with solid polycarbonate housing, reliable & robust construction with IP 65 protection, having Min 3000 lumen output, suitable for pole entry dia of 60mm, suitable for 12 hrs (Dim mode) Autonomy, Lighting mode selectable for 2H/4H/6H/auto along with the CCT 3000K/4000K/6500K by remote. Lithium Pherrophosphate Battery capacity [email protected]. Panel capacity min 13Wp, CRI >=70, System Efficiancy >165 Lm/W & system wattage should not be more than 18W ± 2%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Microwave Motion Sensor 5.8GHz, <=25mW. Life class of LED System 25000hrs@L70. LED. CE Certified, charger efficiency >90%. The PV module should be made up of crystalline silicon solar cells \\"Mono-Crystalline\\" and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp 0℃ to 55℃, certifying above given parameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory including all necessary fixing accessories complete all as specified and directed. |
| 20 | S&F in repair PVC Junction box (SMC), aesthetically designed factory fabricated, weather proof with arrangement of incoming and outgoing feeder with bus bar of suitable capacity for termination of line with single MCB SP, 230 Volt, upto 16 amps, breaking capacity 10 KA for control including copper conductor 1.5 Sq mm from feeder pillar to light fitting complete all as specified and directed. |
| 21 | S&F in repair in commissioning of garden pole size 40 mm dia, upto 1.5 metre long, GI pipe light grade, duly painted with two coats of synthetic enemal paint fixed on pole including with nuts, bolts grouting in ground incl PCC 1:2:4, type B1 (using 20mm graded stone aggrregate) and all Earth work complete all as specified and directed. |
| 22 | S&F in replacement three core PVC insulated Flexible FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed. |
| 23 | S&F in repair in commissioning of garden pole size 40 mm dia upto 3.0 metre long, GI pipe light grade, duly painted with two coats of synthetic enemal paint fixed on pole including with nuts, bolts grouting in ground incl PCC 1:2:4, type B1 (using 20mm graded stone aggrregate) and all Earth work complete all as specified and directed. |
| 24 | S&F in replacement cast aluminium ARCHITECTURAL DESIGNER for Garden light fitting Poles 7 feet 1 inche long Designer LEG and BROADER designer base 270mmx270mm finished with polyurethane paint with prior treatment, dia of one leg at middle is approx 88mm and dia of one leg at edge is approx 100mm, uuter dia for spigot entry 75mm, including 03 Nos \\"T\\" shaped bolts with nuts & washers provided for cement concret as in foundation PCC 1:2:4. type B1 (using 20mm graded stone aggrregate) and earth work complete all as specified and directed. |
| 25 | S&F in replacement cast aluminium ARCHITECTURAL DESIGNER for Garden light fitting Poles 8 feet 3 inches long designer LEG and BROADER designer base 422mmx422mm finished with polyurethane paint with prior treatment, dia of one leg at middle is approx 88mm and dia of one leg at edges is approx 100mm, outer dia for spigot entry 60mm, including 03 Nos \\"T\\" shaped bolts with nuts & washers provided for cement concret as in foundation PCC 1:2:4. type B1 (using 20mm graded stone aggrregate) and earth work complete all as specified and directed. |
| 26 | S&F of Integrated Solar Bldg Security light luminaire with 24.7 W with solid polycarbonate housing, reliable & robust construction with IP 65 protection, having Min 4000 lumen output, Lighting mode selectable for 2H/4H/6H/auto along with the CCT 6500K by remote. Lithium Pherrophosphate Battery capacity [email protected]. Panel capacity min 13Wp, CRI >70, System Efficacy >160 Lm/W & system wattage should not be more than 24W ± 2%, if wattages increases then the size of battery & panelshall also be increased in similar percentage to maintain equal autonomy of the system. Microwave Motion Sensor 5.8GHz, <=25mW. Life class of LED System 25000hrs@L70. LED. CE Certified, charger efficiency >90%. The PV module should bemade up of crystalline silicon solar cells \\"Mono-Crystalline\\" and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1, 2 IEC60598, Operating temp 0℃ to 55℃, certifying above given parameters all reports shall be from in-house NABL or IECQ or any international accredited Laboratory including all necessary fixing accessories such as bracket of GI pipe light grade 32/40 mm dia 1.20 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed. |
| 27 | S&F in replacement cast aluminium ARCHITECTURAL DESIGNER POLE BRACKETS for Garden light fitting, fully cast aluminium finished with polyurethane paint with prior treatment and Square junction with max projection breadth of 1125mm, suitable for two Nos and three Nos Post top Lanterns for 2.5 mtr and 3.0 mtr Poles complete all as specified and as directed. |
| 28 | S&F in replacement LED post lantern Garden light fitting fully cast aluminium body finished with polyurethane paint with acrylic window cover, total length not less than 606mm and max breadth not less than 330mm, suitable for B22 Brass holder provided with aluminium cover with 20 to 40 W LED Bulb, spigot entry 78 mm complete all as specified and directed. |
| 29 | S&F in replacement LED post lantern Garden light fitting fully cast aluminium body finished with polyurethane paint with acrylic window cover, total length not less than 434mm and Max. Breadth not less than 234mm, suitable for B22 Brass holder provided with aluminium cover with 10 to 15 W LED Bulb, spigot entry 62 mm complete all as specified and directed. |
| 30 | S&F in replacement LED post lantern Garden light fitting fully cast aluminium body finished with polyurethane paint with acrylic window cover,total length not less than 505mm and Max. Breadth not less than 228mm, suitable for B22 Brass holder provided with aluminium cover with 15 to 20 W LED Bulb, spigot entry 62 mm complete all as specified and directed. |
| 31 | S&F in replacement LED post lantern Garden light fitting fully cast aluminium body finished with polyurethane paint with acrylic window cover, total length not less than 400mm and Max. Breadth not less than 200mm, suitable for B22 Brass holder provided with aluminium cover with 09 to 12 W LED Bulb, spigot entry 52 mm complete all as specified and directed. |
| 32 | S&F in replacement Garden/Bollard light fitting fully Cast Aluminium body finished with polurethane paint (with prior teramentments) with acylic window cover, bollard of length 650mm and Circular base dia of 140mm and max dia of leg of bollard 75mm surmounted with fully Cast Aluminium body finished with polurethane paint with acylic window cover total length of fitting 505mm and Max breadth of fitting 228mm (Total length of Bollard fitting not less than 1155mm) with B22 Brass Holder provided with aluminium cover with 15 to 20 W LED Bulb and accessories for cement concret as in foundation PCC 1:2:4. type B1 (using 20mm graded stone aggrregate) and earth work complete all as specified and directed. |
| 33 | S&F in replacement LED 30 W flood light Warm/day cool as required, (120 lumen/watt), Aluminium Pressure Die Cast housing with IP66 ingress protection and IK 07, average life 50000 burning hours with 4KV inbuilt surge protection potted driver with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts, bolt and cement concret as in foundation PCC 1:2:4. type B1 (using 20mm graded stone aggrregate) and earth work complete all as specified and directed. |
| 34 | S&F in replacement LED 50 W flood light Warm/day cool as required, (120 lumen/watt), Aluminium Pressure Die Cast housing with IP66 ingress protection and IK 08, average life 50000 burning hours with 4KV inbuilt surge protection potted driver with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts, bolt and cement concret as in foundation PCC 1:2:4. type B1 (using 20mm graded stone aggrregate) and earth work complete all as specified and directed. |
| 35 | S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed. |
| 36 | S&F in replacement sheet metal enclosure for DB SPN 2 ways, 240 V complete fixed properly on pole/wall with suitable size MS flat iron with nut bolts washer etc complete as specified and directed. |
| 37 | S&F in replacement MCB, Single pole & neutral 40 Amp, 240 volts 10 KA breaking capacity, 'B' curve complete all as specified and directed. |
| 38 | S&F in replacement MCB, Single pole & neutral 63 Amp, 240 volts 10 KA breaking capacity, 'C' curve complete all as specified and directed. |
| 39 | S&F in replacement MCB, Single pole 10 to 32 Amp, 240 volts, 10 KA breaking capacity, 'B' curve complete all as specified and directed. |
| 40 | Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2.0 core stranded condector nominal cross section complete all as specified and directed. |
| 41 | Excavation in trenches n exc 1.5m wide and n. exc 1.5m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified and directed. |
| 42 | Returning, filling including spreading leveling watering and well ramming of soil in layers n. exc 25 cm complete all as specified and directed. |
| 43 | Removal of excavated material/surplus soil to a distance n exc 50m and depositeing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. |
| 44 | M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed. |
| 45 | Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed. |
| 46 | Boring/drilling ( horizontally) manually under existing road ( maximum 10 M in width) suitable for passing GI tubing of 40 to 80 mm bore complete all as specified and directed. |
| 47 | S&F in replacement GI tubing Light grade 50 mm for cable protection fixed in poles/walls/laid under roads/crossing etc complete all as specified and directed. |
| 48 | S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection, one twin core cable flat or circular stranded 10 sqmm aluminiuam conductor drawn through non metallic rigid PVC conduit 25 mm dia complete all as specified and as directed. |
| 49 | S&F in repairs Flexiion 5 Mtr LED strip 22 W, 3000K/6000K as required on site with driver with wide viewing angle for good light distribution, easy to install complete all as specified and as directed. |
| 50 | S&F in replacement of LED lamp 9/10/12 watt complete all as specified and directed. |
| 51 | S&F in replacement of outdoor type Flexiion 50Mtr LED strip IP65 Water-Proof Rope and Strip Light, 3000K/6000K as required on site with driver with wide viewing angle for good light distribution, easy to install complete all as specified and directed. Please Enable Macros to View BoQ information |
