Tender For Addition / Alteration And Special Repair To Building P-87 (Sec V) At Nad Trombay Under Ge (Nw) Mankhurd.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Jul 2026
0 days left
EMD
88180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mankhurd → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition / Alteration And Special Repair To Building P-87 (Sec V) At Nad Trombay Under Ge (Nw) Mankhurd.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 18-Jun-2026 | Corrigendum | BOQ | 30-Jun-2026 |
| 2 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed. |
| 2 | M & L for Precast cement concrete block masonary with solid blocks type C1 1:3: 6 set in cement mortar 1:6 (20mm graded aggregate) exc 10cm in width and setting in mortar complete all as specified and as directed. |
| 3 | Demolition of Cement Concrete (Reinforced) of any description and in any position not otherwise specifically provided for |
| 4 | M&L for Design Mix RCC M-30 as in chajja/slabs |
| 5 | Use ands waste of Formwork rough finished to chullah hoods, chajjas, troughs and similar items including edges |
| 6 | M&L for 10 mm thick Polymer modified ready mixed cement based plaster on walls with 40 % fly ash on fair faces of brickwork or concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 7 | M&L for Ready mix plaster 15mm thick on bricks or concrete surface including dubbing coat to match with existing with necessary scaffolding upto 18m height Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 8 | M&L for 8mm thick Polymer modified ready mixed cement based plaster on ceiling with 40 % fly ash on fair faces of brickwork or concrete surfaces finished the surfaces even & smooth including Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 9 | Demolition cement concrete any description and in any position not other wise specifically provided for Complete all as specified |
| 10 | Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, complete all as specified and directed. Note: Hard concrete shall not be removed by force. |
| 11 | M&L for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. \\"Feovert\\" of \\"Krishna Conchem\\" OR \\"Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.) |
| 12 | Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. |
| 13 | M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application complete all as specified and directed. |
| 14 | M&L for building up the profile of structural members by using Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc complete all as specified and directed. |
| 15 | M&L for building up the profile of structural members by using Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm, complete all as specified and directed. |
| 16 | M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 60mm in thickness) with prebatched, prepacked, single component ready to use microconcrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications and all other relevant worksincl scaffolding upto 18 mtr height complete all as specified and directed.(Note : Reinforcement only shall be measured and paid separately). |
| 17 | Material & Labour for preparation of new or old plastered surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces in camouflaging pattern incl necessary sacfolding complete all as specified and directed. |
| 18 | M&L preparing new surfaces of walls applying two coat of oil bound distemper over 3mm thick wall care putty over a coat of primer for smooth finish complete all as specified & directed by EIC. |
| 19 | M&L for preparing old decorated surfaces of wall (plasterered or unplastered or complete removal of existing treatment) & applying two coat of oil bound distemper over 3mm thick wall care putty complete all as specified. |
| 20 | M&L for preparation of old decorated surfaces of ceiling applying two coat of OBD complete all as specified and directed |
| 21 | M&L for preparation and applying two coats obd over one coat of primer on new plasterd surfaces and obtain smooth finish. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar, bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed . |
| 23 | M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 6-7 mm/ 450X 350X 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dados including 10mm thick rendering in CM 1:4 as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and specified. |
| 24 | M&L for Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including 15 mm thick CM 1:6 screed bed for laying floor finishes all as specifed and directed.. |
| 25 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick, with expansion joints & top surface finished even and smooth without using extra cement etc complete all as specified and directed. |
| 26 | Taking up or down steel tubing and connections, including cleaning serviceable pipe for refixing and balance under schedule of credit all as specified and directed |
| 27 | (a)15mm bore |
| 28 | (b) 20 mm bore |
| 29 | S&F of 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, Male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc., also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings, complete all as specified and directed. |
| 30 | Supply & fix 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 31 | S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia out let including grating connecting jointing to waste pipe and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed . |
| 32 | S&F in repair Vitreous china squatting pan orrisa pattern of size 580 x 440mm with integral foot rest and 'P' or 'S' trap including lime concrete bedding connecting flushing pipe and taking out old WC pan & lime concrete and unserviceable connections and making good for floor etc complete all as specified and as directed |
| 33 | S&F in repair Vitreous china Wash down water closet (Pedestal pattern), complete white (excluding fixing bolts, flushing cistern and flush pipe) and 'P' or 'S' trap incl plastic water closet seat cover connecting flushing pipe and taking out old WC pan & lime concrete and unserviceable connections and making good for floor etc complete all as specified and as directed |
| 34 | S&F in repair vitreous china urinals, half stall type (420 x 395 x 635mm), complete incl providing and fixing, bedding urinal against wall in cement mortar 1:2, pointing around urinal back in cement, grating and union for discharge pipe, CP urinal spreader and fitting with CP waste coupling all as specified and approved by Enger-in-Charge.Make Cera,Parryware, ESSCO. |
| 35 | S&F in repairs Vitreous China wash basin, white, flat back, size 580x450 mm including brackets, including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 36 | S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 37 | S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed. |
| 38 | S&F in repair for Stop cock /angle CP fancy type 15mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed. |
| 39 | S&F in repairs 15mm bore pillar taps,chromium plated, swan neck, cast copper alloy screwed high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union complete all as directed. |
| 40 | S&F in repairs 15 mm dia bib taps two way cock , cast copper alloy with crutch , screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated complete all as specfied and drecetd |
| 41 | S&F Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connection and fixed in positin complete in all as specified and directed . |
| 42 | S&F for towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. |
| 43 | S&F for Soap dish, SS, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 44 | M&L 16-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including dismantling of existing tiles all as specified and directed |
| 45 | M&L for 20mm thick machine cut, prepolished cuddappa stone slab as in plateform for fixing oval shape wash hand basin, window cill (including cutting the slab to oval shape to accomdate the sink ,WHB ), pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab etc,also including moulding/rounding to edges of the slab, including dismantling of existing tile slab complete as specified and directed. |
| 46 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed. |
| 47 | Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) Sqm but n.exc 1.5 Sqm each including complete all as specified and directed. |
| 48 | S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) |
| 49 | Supply only 4mm thick sheet glass, ordinary quality fixed in aluminium window along section all as specified and directed |
| 50 | S&F stainless steel wire cloth 0.36mm mm nominal dial of wire and average width or aperature 1.40mm for fixing to wooden door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed. |
| 51 | Taking down existing aluminium grills from balcony/ any locations complete all as specified and directed. |
| 52 | S&F aluminium anodised Grills of approved design for window / ventilators and fixing with F/U channel including drilling as required in RCC sections in rectangular or architectual type balcony opening in existing building, complete all as specified and directed. Note: The Grills shall be of Model DG-100/DG-102 of Make Deco or equivalent make as approved by the GE. |
| 53 | S&F second class hard wood , plain ,soild ,straight chowkats and frames, wrought , rebated on soild rounded or chamfered , put together with gule pinned at joints etc complete all as specified .and directed |
| 54 | S&F factory made 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated |
| 55 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface all as specified and directed.Make: SYNTEX/SHALIMAR/RAJSHRI |
| 56 | M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2020 complete all as specified and directed. Make : SYNTEX/SHALIMAR/RAJSHRI |
| 57 | S&F 100 mm long stainless steel butt hinges fixed with stainless steel screw |
| 58 | S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length |
| 59 | S&F 150 mm extruded aluminum alloy handles, fabricated type anodised |
| 60 | S&F in repairs 300 mm Aluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast , exctruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified |
| 61 | M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate, coping, surface chanels etc including necessary form work complete all as specified and as directed. |
| 62 | M&L for preparation of newly or previously untreated surfaces of wood or wood based surfaces of any description not other wise described , over 10cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed. |
| 63 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed. |
| 64 | All as per item no. 55 above, but 75mm bore |
| 65 | S&F 110mm bore PVC (SWR) bends |
| 66 | S &F PVC (SWR) bends, 75 mm bore, |
| 67 | Removing plant/growth including its roots upto 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed. |
| 68 | M&L Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 centimetre width or girth and applying One coat of synthetic enamel paint complete all as specified and directed. |
| 69 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed. |
| 70 | S&F bands, straps , supports or stays for rain water, ventilating pipes including bolts, clamps, hold fasts etc and similar small articles to Fe-410-0 or Fe-310-0 all as specified & directed. |
| 71 | S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed. |
| 72 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240. |
| 73 | S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of roof sheet any type |
| 74 | M&L two coat of synthetic enamel paint over a coat of red oxide incl preparation of new steel surface complete all as specified. |
| 75 | S&F Steel rolling shutters1.25 mm thick, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete. including dismantling of old MS gate of any type and any description complete all as spd. |
| 76 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified |
| 77 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 78 | Taking down carefully point wiring of any type & pattern (Light/Fan/Socket or power) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc, complete all as specified and directed. |
| 79 | Taking down complete main switches/DBs with enclosure and its components of any size and capacity ,etc complete all as specified and directed. |
| 80 | M & L for point wiring with PVC insulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, for mounting modular switches, sockets, fan regulators etc with all accessories, fittings, PVC junction boxes etc, with suitabe sunk pressed steel boxes for modular fittings not less than 1.6 mm thick, including Modular cover plate of suitable size etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws all as specified for one light / fan / bell point controlled by one switch. Make of wire : KEI/ BENLO/ Polycab/ Anchor(Panasonic)Make of conduit : Pressfit/ Diamond/ Sudhakar/ Plasto |
| 81 | -Ditto- all as per item No 80 here-in-before but for one 5A 2pin/3pin socket out let multipurpose on the same board with other switches. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 82 | -Ditto- all as per item No 80 here-in-before but for one 5A 2pin/3pin switch socket out let multipurpose on independent Board. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 83 | All as per item No. 80 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 84 | S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 85 | S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 86 | S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 87 | S&F modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed. Make : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 88 | Supply and fix LED Flood light 140 W IP 65 |
| 89 | S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directedMake : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 90 | S & F Modular cover plate 8 modulesMake : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 91 | S & F Modular cover plate 3 modulesMake : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 92 | S & F Modular cover plate 2 modulesMake : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 93 | S & F Modular cover plate 6 modulesMake : Anchor(Roma)/Schnieder/ Legrand/ Havells (Crabtree) |
| 94 | S&F ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed. |
| 95 | S&F modular type 3/5 pin socket with one single pole MCB 20 Amp 230 Volts complete all as specified including concealing in wall suitable for AC and Domestic appliances complete all as specified and directed. Make - Havells/ Legrand/ Schneider |
| 96 | Supply And Fix in repairs MCCB DB TPN 12 Way double door 125 Amps prewired suitable for Triple Pole 125 A MCCB as incomer with the following acessories & connecting of existing cables & providing of acbel glands, a) MCB TPN 63 A 25 KA 415 Volt - 2 Nosb) MCB TPN 40 A 25 KA 415 V- 2 Noc) MCB SP 25 A 25 KA 230V - 14 Nos.d) Bus bar, Din rail , Neutral linkMake - L&T/Indoasaian/Legrand/ABB/Schnider |
| 97 | Supply And Fix in repairs MCCB DB TPN 6 Way double door 100 Amps prewired suitable for Triple Pole 100 A MCCB as incomer with the following acessories & connecting of existing cables & providing of acbel glands, a) MCB TPN 63 A 25 KA 415 Volt - 2 Nosb) MCB SPN 40 A 25 KA 415 V- 2 Noc) MCB SP 25 A 25 KA 230V - 14 Nos.d) Bus bar, Din rail , Neutral linkMake - L&T/Indoasaian/Legrand/ABB/Schnider |
| 98 | Supply And Fix in repairs MCCB DB SPN 4 Way double door 63 Amps prewired suitable for SPN 63 A MCCB as incomer with the following acessories & connecting of existing cables & providing of acbel glands, a) MCB SPN 40 A 25 KA 415 V- 2 Nob) MCB SP 25 A 25 KA 230V - 14 Nos.c) Bus bar, Din rail , Neutral linkMake - L&T/Indoasaian/Legrand/ABB/Schnider |
| 99 | M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through PVC concealed conduit with and including PVC insulated 6.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directedNote : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.Make of wire : KEI/ BENLO/ Polycab/ Anchor(Panasonic) |
| 100 | M&L for sub main wiring with two single core 1.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through PVC concealed conduit with and including PVC insulated 1.5 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directedNote : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.Make of wire : KEI/ BENLO/ Polycab/ Anchor(Panasonic) |
| 101 | M&L for sub main wiring with two single core 2.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through PVC concealed conduit with and including PVC insulated 1.5 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directedNote : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.Make of wire : KEI/ BENLO/ Polycab/ Anchor(Panasonic) |
| 102 | M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through PVC concealed conduit with and including PVC insulated 1.5 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directedNote : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.Make of wire : KEI/ BENLO/ Polycab/ Anchor(Panasonic) |
| 103 | Supply & fix in repairs Wall mounted Fan 600 mm sweep, operating on single phase, 230V, AC, 50 Hz having speed of 1440 RPM, air delivery 270 CMM, power output of 180W star rated along with blade, canopy, mounting brackets, rubber insulator. Make - Bajaj ( model - 250439) or equivalent of ALMONARD / ORIENT |
| 104 | Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated |
| 105 | Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed. |
| 106 | Taking down old unserviceable wall mounting fan 600 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 3.15/4 mfd - 01 No.,and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed. |
| 107 | Supply & fix exhaust fans AC single phase 220 V of size 450 mm sweep with louver. |
| 108 | Taking down old unserviceable exhaust fans 380/450 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by Opening of cleaning of slots, Rewinding of fan by super ennameled copper insulated wire as per existing gauge, varnishing, heating assembling and testing, replalcement of worn out capacitor 3.15/4 mfd - 01 No.,and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed. |
| 109 | S&F in repairs Surface, hanging and wall mounted batten (Double side connection) suitable for LED tube 20/22 watts, 230 volts alongwith tube rod 20/22 watt (double side connection), including fixing mounting blocks 2 Nos, 15 mm MS conduit, 1.5 sqmm 3 core pvc insulated copper conductor cable including fixing arrangements complete all as specified and directedMake: bajaj/ Jaquar/ Wipro |
| 110 | Supply and fixing in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed Make: bajaj/ Jaquar/ Wipro |
| 111 | S&F in repair/replacement of building Security light fitting 30/35 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge.Make: Bajaj/ Wipro/ Jaquar |
| 112 | Taking down old unserviceable High bay, Mid Bay, Flame Proof light fittings from walls/Builings/Sheds/Ceiling height up to 10 Meter for repairs and replacement of burnt/worn out accessories and refixing the same in existing position including testing of fittings after repair, testing of connected wiring complete all as directed by Engineer in charge . |
| 113 | Supply & fix in repairs very high efficiency round LED Highbay light fittings 140 Watt in PDC housing, IP 66 luminaire including driver and required GI tube down road of length up to 2 meter with hoooks for hanging the fitting including fixing arrangements and taking down old rusted bracket fittings complete etc. Make :- Crompton / Havells /Bajaj.Note : Fittings shall will be installed in Hangers/Sheds, hight up to 10 Meters only and directed by Engr-in-Charge. |
| 114 | Renewal of broken/wornout earth pit including M & L for earthing chemical with copper plated 50 mm dia pipe 3 mtr long (100 microns) including Electrodite 50 Kg buried directly in ground including earth bore hole work (earth bore not less than 3 Mtr deep below normal ground level and connected to copper earth strip of size 20×3 mm by means of copper nuts bolts with washers and connected as per following specifications complete all as directed by Engineer-in-Charge.(a) Product Model: ASEEL 19 CP, 3 meter long (Copper Plated) – 100 microns .Fast Electrode, Model FE 80 mm 3 mtr (Pure Copper Single Pipe), Outer Dia is 80 mm with a wall thickness of 2 mm, Inner Dia is 26 mm with a wall thickness of 2.6 mm, Overall Length is 3000 mm, External Corrosion Protection: Copper Plated (100+ microns), Internal Corrosion Protection: In addition to Copper Plated (100+ microns), a ground breaking corrosion resistant Crystalline Conductive Compound is filled and compacted in the cavity within the pipes to enhance the electrodes performance. Conforms to IS: 3043 - 1987 i.e., Code Of Practice For Earthing (+ 10%) variations in dimensions applicable. |
| 115 | (b) Electrodite backfill: Fast Electrode Earth Enhancement Compound, Manufactured using Eco - Friendly minerals, Blended homogeneously with conductive carbon(s), Resistivity: < 5 ohm-metre (In ideal moist conditions); > 5 ohm-metre (Dry Conditions), Ph Value: 7.0 - 8.5, High water retention capacity, Hygroscopic, Ionic & Electronic conduction, Swells when it comes in contact with water thereby engaging constant contact between the electrode surface & soil which is a crucial aspect in the performance of an earthing system. Packing Size : 2 Bags of 25 kilograms, Recommended for normal soil conditions. Confirms to IS : 3043 – 1987.(c) Installation of earthing with bore well machine complete for bore exceeding upto 4.5 meter below ground level complete all as specified and directed by Engr-in-Charge. |
| 116 | Supply & Fixing air termination Copper rod 12 mm dia, 300 mm long for lightening conductor including base plate with all necessary nut bolts and drilling job etc. |
| 117 | Supply & fixing for Aluminium strip 25 x 3.15mm on wall/ roof/ batten or recessed or buried in ground including all insulators, screw, nut bolts with saddles and fixing for roof conductor and down conductor complete all as directed by Engineer-in-Charge. |
| 118 | M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos. 8 mm dia, 25mm long hex. head screw. |
| 119 | Supply and fixing of GI strip 32 x 6mm with saddles and fixing screws etc for roof conductor and down conductor as required and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 120 | Supply and fixing of GI strip 32 x 6mm with saddles and fixing screws etc for roof conductor and down conductor as required and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender