|
| 1 | Taking down and refixing the shutter of any description in the same opening after easing and adjusting and making the door should be close properly, area of shutter of area exc 1sqm and not exceeding 2 sqm each complete all as specified and directed. |
| 2 | Resecuring or earsing and adusting without taking down of shutters of any description exc 1 sqm and n-exc 2 sqm each complete all as specified and directed. |
| 3 | Petty repairs to wooden/particle Board shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including fixing with hinges etc complete all as specified and directed. |
| 4 | Petty repair to existing steel window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all as directed by Engineer-in-Charge |
| 5 | Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats |
| 6 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed |
| 7 | Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed |
| 8 | Taking down shutters of any description exc 1sqm each and not exc 2.00 sqm each complete all as specified and as directed |
| 9 | M&L in repairs 18/19 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination as a cup board shelf, fixed with screws to timber framed work including fixing arrangement complete all as specified |
| 10 | S&F 25 mm thick flush shutter solid core construction with block board core and plywood face panels with both decorative face veneer with lipping/frame as a cup board Shutter/shelf, fixed with screws to timber/Iron framed work including fixing arrangement complete all as specified |
| 11 | M&L for Complete repair of steel rolling shutters including servicing, overhauling of rolling shutter gear operated type or hand operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , repair/replacement to guide channel, shaft, pully, gear box, hood cover, pully, bearings etc and replacement of parts like spring, pins, lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making good the surfaces with CM (1:4), including welding of any thickness and making the rolling shutter functional to the entire satisfaction of the Engineer in charge complete all as specified and directed by Engineer-in Charge. (size of each shutter is 10 to 25 sqm) |
| 12 | M&L for welding of purpose to repair steel door of garrages any size to obtain smooth opening & closing complete including cutting existing hinge, complete all as specified and directed. |
| 13 | Petty Repair for stop leaking of CP Brass Bib tap/ Pillar tap/Stop cock/Wall, sink or WHB Mixture by suitable spindle and etc, complete all as specified |
| 14 | Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed. |
| 15 | M&L for welding of purpose to repair steel windows/door chowkhats any size to obtain smooth opening & closing complete including cutting existing hinge, complete all as specified and directed. |
| 16 | Petty Repair of Aumunium door/Window by taking down and refitting with same proper alignment including aluminum windows to restore their functionality, durability, repairing or replacing locks, handles, rollers, hinges, and necessary screws etc and sealing gaps to prevent air and water leakage if required, be use quality materials and skilled workmanship to ensure long-lasting results all as specified and directed |
| 17 | Petty repair to cup board(Kitchen)/including easening of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano hinges fixing handle etc with drawers adjusting of ball catches etc,( One unit shall comprises one cup board irrespective in numbers of shutters and drawers) complete all as specified and directed by Engr-in- charge. |
| 18 | S&F in repair Aluminium anodised, barrel tower bolts 200 mm long, complete all as specified |
| 19 | S&F in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 20 | S&F in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified |
| 21 | S & F in repair 100 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified. |
| 22 | S & F in repair 150mm MS ordinary rat tail rod pattern springs incl roller and roller plate complete (Helical door spring) Make Ritz or equivalent as approved welded to steel chowkets complete all as specified and directed. |
| 23 | S&F in repair Aluminum floor door stopper 100 mm with two rubber legged all as specified and directed. |
| 24 | S&F in repair anti dusting rubber beeding for door shutter for anti snakes, dusting etc all as specified |
| 25 | M&L for 3 mm thick plain glass fixing and glazing with oil putty/nails wire/beading including haking out old broken glass in wooden/steel/aluminium frame complete all as specified and directed |
| 26 | M&L for 3 mm thick figure glass , pin head type fixing and glazing with oil putty/nails wire/beading including haking out old broken glass in wooden/steel/aluminium frame complete all as specified and directed. |
| 27 | S & F in repair galvanised mild steel wire cloth nominal dia of wire 0.45mm and average width of aperture 1.40 mm in wooden/steel frame complete all as specified and directed |
| 28 | S&F in repairs continuous (piano) hinges 30 mm width of flaps, mild steel, bright finish or electro galvanised with Cup Board or drawers complete all as specified |
| 29 | S&F Ball catches with 8mm dia stee lball, and brass body and striking plate including letting in and fixed |
| 30 | S & F 100 mm Mild Steel Hasp & Staple , fabricated type, anodised including bolt to hinge plate and fixed with screws with Cup Board shutter, All as Specified |
| 31 | S&F in repairs peg set of six made of stainless steel all as direcred and specified |
| 32 | S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed |
| 33 | M&L for Stainless Steel pipe (304 Grade) 25 mm dia curtain rod with fixed in the hooks, and finials/side brackets (both side), shade fixed in repair all as specified. |
| 34 | M&L for renewing glazed tiles in patches, area n exc 5 sq.m. includingremoving and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specifed and directed by Eng-In-Charge |
| 35 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed |
| 36 | M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. |
| 37 | M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified. |
| 38 | M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed |
| 39 | M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified |
| 40 | M&L preparing surfaces new of walls and applying two caots of cement base paint over a coat of primer complete all as specified incl preparation of surfaces. |
| 41 | M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified. |
| 42 | Taking up or down existing serviceable steel tubing and connections and refixing old steel tubing and connections including cleaning in new or old position (walls, ceiling, floors, trenches etc ) Bore of pipe 15mm, complete all as specified and directed. |
| 43 | Taking up or down existing serviceable steel tubing and connections and refixing old steel tubing and connections including cleaning in new or old position (walls, ceiling, floors, trenches etc ) Bore of pipe 20mm, complete all as specified and directed. |
| 44 | Taking up or down existing unserviceable steel tubing and connections, and supply and fixing new steel tubing and connections in new or old position (walls, ceiling, floors, trenches etc ) Bore of pipe 15mm, complete all as specified and directed. |
| 45 | Taking up or down existing unserviceable steel tubing and connections, and supply and fixing new steel tubing and connections in new or old position (walls, ceiling, floors, trenches etc ) Bore of pipe 20mm, complete all as specified and directed. |
| 46 | S & F in repairs small fittings galvanised iron medium grade such as socket, nipple,extension nipple , tank nipple, union , elbow, Tee, reduser etc any length 15/20 mm bore replaced independly complete all as specified and directed. |
| 47 | S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified. Make:- Prayag/Polytuf |
| 48 | S&F in repairs for 20 mm bore Gate Valve of brass cast copper aloy high pressure screwed for iron pipe and fixed complete all as specified |
| 49 | S & F PVC cover of water tank maching with existing water tank complete all as specified |
| 50 | S&F Rotational moulded polythene water storage tanks Triple layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed |
| 51 | S&F Rotational moulded polythene water storage tanks Triple layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed |
| 52 | S&F in Repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified. |
| 53 | S&F in repairs Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, complete all as specified and directed. |
| 54 | Supply and fix in repair Vitreous china wash down water closet pan (Pedestal pattern incl one toilet paper holder, one health faucet and jet ingrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as directed and specified. |
| 55 | S&F in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand. |
| 56 | S&F in repair waste Coupling Suitable for Existing WHB/Sink all as specified |
| 57 | S & F in repairs waste pipe suitable for Existing WHB/Sink all as specified |
| 58 | S&F in repairs for 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms) |
| 59 | S&F in repairs for 15 mm bore Angle Stop Valve of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms) |
| 60 | SS&F in repair 15 mm bore dia bib tap (long or short body) chromium plated (CP) with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge. |
| 61 | S&F in repair pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium platted screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 62 | S&F in repair Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified. |
| 63 | S&F in repair wall mixer fancy type cast copper alloy chromium plated high pressure with crutch or butterfly handle non telephonic complete all as specified. |
| 64 | S&F in repair PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified |
| 65 | S&F in repair 15mm Angle/stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified . |
| 66 | S&F in repairs Stop valve,15 mm cast copper alloy chromium plated fancy type with long shank &cup(concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified. |
| 67 | S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe complete all as specified. |
| 68 | M&L in repair PVC bath room cabinet 400mm x 500 mm with mirror fixed in repairs all as specified. CAT NO 554 Make- Prayag |
| 69 | S&F Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality all as specified . |
| 70 | S&F in repair Brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete all as specified |
| 71 | S&F in repair Brass chhromium plated tubular tower ring 150mm dia round , D type, between flanges complete all as specified |
| 72 | S&F in repairs Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,all as specified and directed |
| 73 | S&F sheet glass corner set of 5.5 mm thick glass of 3 pieces as per sample approved by Engr -in-charge all as specifed and directed |
| 74 | S&F sheet glass 5.5 mm thick WHB Shelf 600 mm long and 125 mm wide as per sample approved by Engr -in-charge complete all as specifed and directed fixed in repair |
| 75 | S & F in repair for 600 mm X450 mm looking mirror of any size 5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified |
| 76 | S&F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified and directed Engr-in-Charge. |
| 77 | S&F in repair Mild steel chromium plated jet for EWC 600mm long tube superior quality all as specified. |
| 78 | S&F in repairs stainless steel Plate rack 1mm thick of overall size 750mmx600mmGrade -304 including shelves rod for putting plates etc, complete all as specified and directed. |
| 79 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with pIngs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm , bowl size 410mmx330mmx160mm complete all as specified and directed. |
| 80 | S & F in repair CP gratting 125mm dia with/ with out hole circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified. |
| 81 | S&F in repairs PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.Make: Finolex/Reliance/Supreme |
| 82 | S & F in repair for 110mm PVC bends / shoe of any radius complete all as specified |
| 83 | S&F in repairs 110 mm bore PVC (SWR) junction ( T or Y ) with access door equal or unequal, complete all as specified. |
| 84 | S&F in repair PVC SWR pipe 75 mm dia single socketed in any length with rubber ring joints fixed to walls etc all as specified |
| 85 | S&F PVC (SWR) bends 75mm bore |
| 86 | S&F PVC (SWR) bends with access door 75mm bore |
| 87 | S&F 75 mm PVC (SWR) junction single (single T) equal or unequal |
| 88 | S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal with acces door |
| 89 | Supply and fix Angle cock two way with flange, fancy type chromium plated,screwed down,screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified Make ( Jaquar ,Prayag Or Equivalent) |
| 90 | Note - Rate quoted above all items inclusive provision as under: Making arrangement for establishment of centralized complaint centre in the existing building as under :-(a) Contractor shall be given user id and password for accessing the online complaint portal and contractor shall at his own expense by himself or his representative feed the data in r/o complaints so generated.(b) Manually registered complaints shall be obtained everyday from MES complaint cell and rectification or otherwise shall be intimated to JE in charge of the cell for updation of manual registers.(c) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract.(d) Provision of communication and conveyance (as required) facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints on a daily basis. (g) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone(j) On lodging the complaint, the Complaint No will be assigned for reference. Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen.(k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. Please Enable Macros to View BoQ information |
| 91 | Note - Rate quoted above all items inclusive provision as under: Making arrangement for establishment of centralized complaint centre in the existing building as under :-(a) Contractor shall be given user id and password for accessing the online complaint portal and contractor shall at his own expense by himself or his representative feed the data in r/o complaints so generated.(b) Manually registered complaints shall be obtained everyday from MES complaint cell and rectification or otherwise shall be intimated to JE in charge of the cell for updation of manual registers.(c) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract.(d) Provision of communication and conveyance (as required) facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints on a daily basis. (g) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone(j) On lodging the complaint, the Complaint No will be assigned for reference. Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen.(k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. Please Enable Macros to View BoQ information |
