|
| 1 | Sch 'A' |
| 2 | Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as specified & directed from walls fins facia etc up to 7.00 m ht incl removing all shurbs,vegetation,trees around the area for working space etc. |
| 3 | M&L rendering 15 mm thick on brick work or concrete surfaces in cm 1:4 rendering to be finished even smooth without using extra cement as on walls/fins facia /chajjas etc any height complete all as specified & directed. |
| 4 | M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls/chajjas complete all as specified & directed. |
| 5 | M & L rendering 5 mm thick on brick work or concrete surfaces in CM 1 :4 rendering to be finished even smooth withour using extra cemet as o chajjas at any heigth complete all as specifed and directed. |
| 6 | M&L for newly plaster suraface treatment of wall etc by mechanical sander and applying 2mm thick wall putty for smoothness of surfaces incl rubbing and sanding and applying two coat of premium exterior acrylic emulsion paint over a coat of exterior primer on walls and ceiling all as specified and directed. |
| 7 | M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 rendering to be finished even and smooth without using extra cement complete all as specified & directed etc any height. |
| 8 | M&L preparing new plaster surfaces of walls applying two coats of oil emulsion distemper with fibre brushes complete all as specified and directed. |
| 9 | M&L rendering 5 mm thick on ceiling surfaces or concrete surfaces in cm 1:3 rendering to be finished even and smooth without using extra cement complete all as specified & directed etc any height. |
| 10 | M & L Preparation of new plastered surfaces of Ceiling and applying three coat of white wash on Ceiling complete all as specified & directed . |
| 11 | M&L for Preparation of old decorated plastered or un-plastered surfaces of walls of any height including cornices by brooming down with steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of white wash on ceiling all as specified and directed. |
| 12 | Preparation of old decorated plastered or un-plastered surfaces of walls of any height including cornices, pilasters by brooming down with steel wire brushes scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc and applying one coat of White wash on walls all as specified and directed. |
| 13 | M&L for complete removal of existing treatment of walls including brooming down, scrapping down , moulds etc on walls and applying two coats of distemper oil emulsion (any tint) complete all as specified and directed. |
| 14 | M&L for Complete removal of existing treatment of wall etc by mechanical sander and applying 2mm thick wall putty for smoothness of surfaces incl rubbing and sanding and applying two coat of premium exterior acrylic emulsion paint over a coat of exterior primer on walls and ceiling all as specified and as directed. |
| 15 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises complete all as specified and directed. |
| 16 | M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed. |
| 17 | Ditto- as per item No 15 above but as in skirting over rendering 10mm thick in cement mortar 1:4 all as specified and directed. |
| 18 | M&L vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement mortar (1:6) all as specified and directed. |
| 19 | Ditto as item No 02 above but in skirting / dado laid over 10mm thick cement screed in CM 1:4 complete all as specified and directed. |
| 20 | M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 21 | M & L for PVC tiles / sheets, laminated plain coloured , marbled mosaic or moltted finishes laid with approved rubber based adheshive floor (4 mm thick) set in jointed in neat cement slurry incl 15 m thick bedding layer in cement mortar (1:6) as specifed and directed |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed. |
| 23 | S&F 3 mm sheet glass, ordinary quality and glazing with oil putty and silicon n exc .5 sq. m in each pane etc complete all as specified and directed. |
| 24 | S&F ditto all as per item no. 14 but exc. .5 sqm of size 5.5 mm fixed to aluminium shutter with beading etc complete all as specified and directed. |
| 25 | S&F Sheet 4 mm thick frosted glass, squares n.exc 0.5 sq. m each pane complete all as specified and directed. |
| 26 | S&F in repairs door closer aluminium (Die cast) body hydraulically regulated designation No. 2 universal type, suitable for door shutters of 36 to 60 Kg (Cast iron body) etc complete all as specified and directed. |
| 27 | Taking down existing Aluminum door shutter and adjusting the floor spring, locking devices, towerbolts and oiling the components and refixing the same on same opening and making smooth function of the door etc complete all as specified and directed. |
| 28 | S&F and Takingdown PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 29 | S&F in repair PVC (SWR) bend 110 mm bore of any radius complete all as specified & directed. |
| 30 | S&F in repairs brass spindle 15 mm for bib cocks ,angle cocks ,stop cocks, concelaled cocks (note:- payment will be done in each item) all as specified & directed. |
| 31 | S&F in repairs Bib taps cromium plated, (long body), cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule and fixed in iron pipe of 15 mm complete all as specified and directed. |
| 32 | S&F in repair stop valves/angle valve 15mm bore cromium plated, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 33 | S & F in repairs PVC connections 20mm size with PTMT nuts and bolts of length 600 mm etc complete all as specified and directed |
| 34 | S & F in repairs brass chromium plated shower rose 125 mm with arm size complete all as specified and directed. |
| 35 | S&F in repair stop valves 15mm bore cromium plated , cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed (concealed type)etc complete all as specified and directed. |
| 36 | S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminum rod and high- density plastic ball screwed for iron pipe and fixed 20mm dia minium weight 210 gms etc complete all as specified and directed. |
| 37 | S&F in repair 32 mm bore PVC waste pipe complete all as specified and directed. |
| 38 | Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger any type of flush complete all as specified and directed. |
| 39 | S & F in repairs grating round/Square with hole CP minimum weight 50 gms as standard quality complete all as specified and directed. |
| 40 | S & F in repairs grating round/Square with out hole CP minimum weight 50 gms as standard quality complete all as specified and directed. |
| 41 | S&F in repairs soap dish of stainless steel fixed to wall with screw all as specified and directed. |
| 42 | S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed. |
| 43 | S&F in repair flushing syphon kit complete for low level single or double action flushing cistern complete set (excluding float valve PVC handle) all as specified and directed. |
| 44 | S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to flooretc complete all as specified and as directed. |
| 45 | S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed. |
| 46 | S & F in repairs health faucet (ABS Body) mild steel cromium plated suitable for 15 mm dia pipe 1.25 metre lomg flexible tube and ABS wall hook including making connections andfixed to in position etc complete all as specified and directed. |
| 47 | S&F in repair small GI fittings 15mm, such as socket, tee, elbow reducer 20 x 15 reducer 20 x 15 tee of unequal size ,GI union 15mm, GI union 20 mm etc as required at site complete all as directed (Unit for this item shall be one No for each one item). |
| 48 | S&F in repair tubular towel rail brass chromium plated, 20 mm dia , D type, 60 cm long between flanges all as specified and directed. |
| 49 | S & F in repairs half stall pattern urinal flat back size 465x355x265mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern) but including urinal pipe etc complete all as specified and directed. |
| 50 | S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foor rest etc complete all as specified and directed. |
| 51 | S&F in repair urinal spreader of CP any colour for fixing with 15 mm dia pipe. Complete all as specified and directed. |
| 52 | Material & Labour for PolyUrethane Coating based waterproofing and heat reflecting system having following key performance properties:(a) UV resistant and resistant to yellowing and weathering(b) Highly elastic and crack bridging(c) Non-toxic and VOC compliant water based coating(d) One component ready to use(e) Excellent adhesion on porous and non porous substrates(f) Seamless waterproofing membrane (g) Water vapour permeable Note : The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer.Procedure : Providing and applying primer over the prepared surface with Homeshield PU ROOFKOT or Equivalent. First coat: Material : Water = 1:1 by weightTotal thickness: ̴̴ 0.4 – 0.5 mmConsumption: 0.25 kg/sqm.Reinforcement: Glass fiber mesh.Second coat: Homeshield PU ROOFKOT or Equivalent.Consumption : 0.5 kg/sqm.Third coat: Homeshield PU ROOFKOT or Equivalent.Consumption: 0.5 kg/sqm. |
| 53 | M & F in repair mild steel Mortice lock vertical type 100 mm size , 4 lever fixed in aluminimum shutter complete all as specifed & directed. |
| 54 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 55 | M&L reinforced cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in manhole covers and the like set in cement mortar (1:4) duly placed on manholes complete all as specified and directed. |
| 56 | M&L, TMT bars 8mm dia cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified and directed. |
| 57 | Demolition brickwork built in cement mortar or lime mortar including all quoins, arches, pillars etc but excluding ashlar facing , dressed stone work and precast concrete articles all as specified & directed. |
| 58 | M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:4) all as specified & directed. |
| 59 | All as per item No. 18 here-in-before but except bricks. (Old serviceable bricks retrieved during demolition shall be re-used after cleaning). |
| 60 | Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each. |
| 61 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube in opening as per specification and drawing as specified and directed. |
| 62 | S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing all as specified and directed. |
| 63 | S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed all as specified & directed.. |
| 64 | S&F 125mm aluminium handles, cast type ,anodised and pattern/design as approved all as specified & directed.. |
| 65 | S&F in repairs looking mirror 600mm x 450mm bevelled edge of selected quality glass mounted on 6mm commercial ply or AC building boards with aluminum frame all around and fixed to wooden plug with CP brass screws all as specified and directed |
| 66 | S & F In repair swimming Pool Lane Marking Divider Floating Partition Nylon Rope Marker with Plastic Float Ball , Pack of 1 ( 25 Meter Each Length and Orange Colour 35 Ball Float ) complete all as specified & directed. |
| 67 | S & F in repair Drain Flat Runnig (Swimmming pool) stainless steel , brushed finish ,600 mm in Length and 200 mm in width as cover of overflow drain as specified and directed |
| 68 | S & F 2mm thickness Acrylic Wall Mirror 4 Pcs Full Length (60 x 60)mm for wall with double type frameless flexible square shaped Bedrrom vanity mirror as specified and directed |
| 69 | M&L 50 mm thick PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) as in sub base of floor complete all as specfied and directed. |
| 70 | M&L chequerred cement concrete tiles 30cmx30 cm x25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment , icnluding 20mm thcik screed bed in cement mortar 1:6 all as specified & directed.. |
| 71 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above gd level), complete all as specified and directed. |
| 72 | Opening of filter complete including taking out of complete filter media and disposal from site to a distance exc 100m but not exc 150m and depositing where directed. |
| 73 | Taking out GM/Brass/PVC nozzles from the filter of any size and type all as specified and directed. |
| 74 | Fixing only serviceable GM/Brass/PVC nozzels retreived under Srl item 2 above after cleaning with air pressure and sulphuric acid complete all as specified and directed. |
| 75 | S&F PVC nozzles of filter of same size, make and type as replaced complete all as specified and directed. |
| 76 | Running welding 6mm thick in patches inside filtration dome including required size and quality of MS flat/ angle iron/MS round for supporting of nozzle base plate inside filration dome, at site, after removing old weld complete all as specified and directed. |
| 77 | M&L for painting including preparation of old surfaces (inside the filter dome ) by brushing, cleaning of rust etc. with one coat of anticorrosive paint with spray machine complete all as directed. |
| 78 | M&L for painting including preparation of old surfaces (outside the filter dome ) by brushing cleaning of rust etc. and applying one coat of synthetic enamel paint, with spray machine complete all as directed. |
| 79 | M&L for painting including preparation of old surfaces by brushing and cleaning of rust etc. outer steel surfaces of pipe, sluice valve, pump set, motors, blower uint, LT panel board, etc and applying one coat of synthetic enemel paint complete all as specified and directed. |
| 80 | S&F Filter media in the steel filter of under mentioned type and quality incl and providing new filter media complete all as specified and directed. |
| 81 | M&L for First filter media (bottom) with natural river stone round/oval shaped with aggregate of size 25 to 40 mm, after thoroughly sieving, disintering and washing with diluted chlrochoric acid, 100mm thick layer complete as specified and directed. |
| 82 | All as per Srl item No. 80 above, but for second layer of filter media with size of 15 mm to 25 mm. |
| 83 | All as per Srl item No. 80 above , but for third layer of filter media with size of 6 mm to 15 mm |
| 84 | M&L for layer of filter media (Top) quaintz size white sand size 12/24 mesh after through sieving and disintering and washing with diluted chlrochoric acid 75cm thick layer in the steel filter dome complete all complete as specified and directed. |
| 85 | S&F for closing of top/Bottom cover of steel dome with by providing suitable size rubber packing including replacement of old MS nut and bolt as required as specified and directed. |
| 86 | M & L for Unplasticised PVC pipes of size 160 mm pressure rating 10 kg/sqcm and fixed complete to walls ,ceilling or in floors etc including fittings such as socket, bend, elbow, union etc. complete all as specified & directed . |
| 87 | M & L for Unplasticised PVC pipes of size 110 mm pressure rating 10 kg/sqcm and fixed complete to walls ,ceilling or in floors etc including fittings such as socket, bend, elbow, union etc. complete all as specified & directed . |
| 88 | Supply and fixing of flange adaptor of upvc fitting of 160 mm bore including complete fitting and fixture as directed. Make : Supreme/Astral/Aqvastar/Astralpool |
| 89 | Supply and fixing of flange adaptor of upvc fitting of 110 mm bore including complete fitting and fixture as directed. Make : Supreme/Astral/Aqvastar/Astralpool |
| 90 | Supply and fixing of double union of upvc fitting of 110 mm bore including complete fitting and fixture as directed. Make : Supreme/Astral/Aqvastar/Astralpool |
| 91 | S &F in repair Footvalve (check valve) threaded type, fitted with suction pipe of 160mm bore with all complete fixing arrangement, complete all as specified and directed. |
| 92 | Supply and fixing of butterfly valve upvc fitting of 160 mm bore including complete fitting and fixture as directed. Make : Supreme/Astral/Aqvastar/Astralpool |
| 93 | Supply and fixing of butterfly valve upvc fitting of 110 mm bore including complete fitting and fixture as directed. Make : Supreme/Astral/Aqvastar/Astralpool |
| 94 | S&F in replacement of soft starter suitable for pump set upto 10 to 15 HP, 415 Volt ,3 phase, with IP-20 protection enclosure complete all as specified and as directed. Make : Schneider/ L&T/ Crompton. Please Enable Macros to View BoQ information |
| 95 | S&F in replacement of soft starter suitable for pump set upto 10 to 15 HP, 415 Volt ,3 phase, with IP-20 protection enclosure complete all as specified and as directed. Make : Schneider/ L&T/ Crompton. Please Enable Macros to View BoQ information |
