Tender For Drawing New Mundela 11Kv Ug Feeder From Aruvikkara 110Kv Substation At Electrical Section Uzhamalakkal Of Electrical Division, Nedumangad Under Electrical Circle, Kattakada, Uzhamalakkal-Kerala
TDR : 55897138
Tender Notice
BOQ
10 Days Left
Uzhamalakkal
Kerala
Tender For Drawing New Mundela 11Kv Ug Feeder From Aruvikkara 110Kv Substation At Electrical Section Uzhamalakkal Of Electrical Division, Nedumangad Under Electrical Circle, Kattakada
Name of Work:- Drawing new Mundela 11kV UG feeder from Aruvikkara 110kV Substation at Electrical Section Uzhamalakkal of Electrical Division, Nedumangad under Electrical Circle, Kattakada
Sl. No.
Item Description
1
Excavation of cable trench of appropriate size ( normally 1.2m deep and 0.35m /0.5m wide for single/double run) in all classes of soil including breaking clods, watering, ramming and sectioning of soil bank etc. and back filling the soil after cable laying and consolidating the soil in layers of 75cm (excluding laying of cable).
2
Laying HT XLPE UG cable of sizes beyond 3x185 sq mm and upto and including 3x300 sqmm including conveying cable from Sub Regional Store/stacking place to work site and laying it carefully using cable rollers, taking through stone ware/G.I.pipes at road crossing/culverts/bridges etc. whereever necessary, providing identification tags at 5m intervals, filling the space around the cable with riddled soil and covering the top with bricks, providing cable route markers at 100m intervals, inclusive of cost of all materials (other than cost of GI/HDPE pipe & UG Cable), labour and transport including crane charges excluding excavation and backfilling.
3
Charges for HDD including survey of site information collection regarding underground utilities, survey of utilities pit making, pilot drilling pre-remaining pulling 110mm dia HDPE pipe and uncoiling and laying 11Kv UG cable through installed HDPE pipe during work at night hours
4
Doing straight joint on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site.
5
Doing one cable end termination on HT XLPE UG cables of sizes beyond 3x185 sqmm and upto and including 3x300 sq mm using the cable jointing kit supplied departmentally after making fencing,caution board and all other safety measures including charges for cable jointer etc. complete as per the direction of the departmental officers.
6
Mounting and connecting HT XLPE UG cable ends of all sizes upto and including 3x300 sq mm with special type cable clamps, bolts, nuts, terminal protectors etc.including cost of extra materials if needed and giving necessary jumper connections. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
