Tender For Special Repairs To Walls, Floors And Roofs In Hvfts At Hvf, Avadi., Hvf Training School, Avadi-Tamil Nadu

TDR : 55895617

Tender Notice
BOQ

14 Days Left

Hvf Training School, Avadi , Tamil Nadu

Tender Brief : Tender For Special Repairs To Walls, Floors And Roofs In Hvfts At Hvf, Avadi.

Document Fees
Refer document

EMD
₹ 710000.0 /-

Tender Value
₹ 7.68 Crore /-

Submission Date
24-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Removal of existing old damaged Bitumen felt layer including removing of all residual bitumen and primer including complete removal of all existing treatment traces using hand buffing machine and depositing the removed materials to a distance not less than 1 Km.
2	Demolition of brick tiles or terracing tiles, single layer on roofs etc., and cleaning with wire brushes, roughening the surfaces and hacking to form key to receive plaster including.
3	Material and labour for providing a cement concrete layer average thickness 40mm using B0 type, 1:2:4 (12.5mm graded aggregate) concrete and finishing the surface.
4	Supply of liquid waterproofing compound for plastering in roof surfaces. The make of liquid waterproofing compound should be got approved by E-I-C.
5	Supply and application of Polyurethane based sealant for filling of visible cracks up to 10mm width and 5mm depth. PU sealant material shall have elongation more than 700%.The contractor shall use Hyperseal expert 150 of Alchemica/seal N flex Bostik/Master flex 472 of BASF/Polyseal 1 CK of CIPY / shaliseal PU of STP, makes are only acceptable as approved by EIC and finishing the top surface with solvent based primer like microsealer 50 of Alchimica / N49 primer of Bostil/Masterseal P 2525 of BASF / Terra prime from CIPY/ Shaliprime PUM of STP Makes are only acceptable.
6	Supply and application of seamless Polyurethane (PU) based elastomeric coating exposable to atmosphere. The work consisting a) Application of PU based primer minimum of 100gms per SQM like MICROSEALER 50 of Alchemica/Ultraseal PU primer of Bostik / Masterseal P 2525 of BASF / Terra prime flrom CIPY / Shaliprime PUM of STP makes.b) supply and application of seamless PU based elastomeric coating over primer consiting of I) using material not less than 1.5 KG/Sqm having elongation more than 400 % ii) Material should have adhesion more than 20 KG/SQ.CM iii) the material should have Shore'Á'hardness more than 60 ( Contractor shall use Material like HYPERDESO CLASSIC of Alchemica/Ultraseal PU of Bostik / Masterseal M800 of BASF /Terraflex of CIPY/ Shaliurithane LHM of STP makes are only acceptable as approved by EIC)
7	M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
8	Supply and fixing of Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bedding in cement mortar 1:4, 15mm thick for laying floor finishes.
9	Supply and fixing of Glazed ceramic coloured tiles in vertical surface 7 to 8 mm thick (square/ rectangular) set and jointed in neat cement slurry and pointed in white or coloured cement to match set and jointed in neat cement slurry and pointed in white or colored cement to match including plastering in cement mortar 1:4, 15mm thick for laying floor finishes.
10	Material and Labour for fixing Light shade Vitrified ceramic tiles 10mm thick (Square/rectangular ) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed in cement mortar 1:4, 15mm thick complete.
11	Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.
12	Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
13	M & L for Cement coloured concrete tiles 20cm x 20cm x 20mm thick,machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished with white cement and pigment.
14	Dismantling of Asbestos cement sheets (corrugated, semicorrugated etc.) in roof coverings as directed and returning to CE stores intact.
15	S&F of 6 mm thick galvanised mild steel in valley gutter (Mass of Zinc Coating shall be as per IS 4759-1996 Table 1 minimum value shall be 610 gram per square metre). The galvanised steel sheet shall be jointed with welding and shall be grinded to have a levlelled surface. The stiffners of 150 mm width shall be provided below every joint and the same shall also be welded on all sides to get a single joint without any holes/leakages. The gutter shall be welded and placed as per the site condition. The rates include provision of the galvanised steel spouts in the valley gutters by making circular holes in the valley gutter and full circular welding of the spouts to discharge the rainwater to the PVC down take pipes of dia 160 mm of suitable sizes of galvanised steel spouts to be made and fixed complete all as per specifications and instructions and as directed. By considering the dimensions & height all safety precaution required for the work shall be strictly followed including all necessary scaffolding and safety aspects complete as required at site.
16	S & F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with J-type or cranked hook bolts and self tapping screws as specified.
17	Supply and fixing of aluminium zinc coated sheet of trapezoidal profile sheet provided with PUF panels with 50mm thick puff sandwitched between top and bottom 0.50 TCT colour coated corrugated sheets with minimum yield strength 500N/Sqm
18	S & F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
19	Material and labour for Polycarbonite sheet 2mm thick to suit the existing roof profile as in roof covering/cladding to wall self drilling/self tapping anticorrisive serews with EPDM seal complete all as per manfacturers specification and instructions and as approved and as directed,by considering the dimension & including all necessary scaffolding and safety aspects complete. The height of work exceedding 10 meters from the average ground level.
20	Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.
21	Supply and fixing of Anodised aluminium snap grid (of size 605mm x 605mm ) frame work for false ceiling all as specified.
22	Material and Labour for exposed metal frame ceiling of 8mm thick with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)
23	Material and labour for painting calcium silicate board in ceiling with one coat of primer over two coat of internal plastic emulsion preparation of new surfaces.
24	Dismantling structural steel work including door,gates but excluding frame truss etc.
25	Supply and Fixing of roof truss framed work using Fe 410 -W(Gde-E-250)quality-A mild rolled steel tube,angles,plates etc. inculding cutting,welding etc complete.
26	S & F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified.
27	Taking down window frame with shutter (without taking off shutters from the frames) and handing over the same to CE (E) stores.
28	S & F of Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified
29	S & F of 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane
30	S & F of Anodised aluminium frame for doors, windows and grill fixed with ' F ' type aluminium chennel complete.
31	Taking down cement or cement lime plaster on brick or stone walls,/tiles etc. including raking out joints, hacking for key, scrubbing down with water, etc.
32	M & L for Dubbing in CM 1:4 , 10mm thick on faces of old brick work and concrete surfaces.
33	M & L for plastering in CM 1:3, on fair faces of ceiling to 12mm thick.
34	M & L for plastering in CM 1:4, 15mm thick on fair faces of brick work, concrete surfaces and Door & Window Jamb plastering.
35	Taking down door shutters but exc 1 sq. m and n exc 2 sq. m each and handing over the same to CE (Stores).
36	S/F of plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together, with glue pinned at joints of 2nd class hard wood.
37	S/F of Floor door stopper of brass body with Overall length of cover plate (140 mm)and tongue, anodised,with hard drawn steel spring,fixed in floor.
38	Supply and fixing of extruded brass handles fabricated and polished of size 150m
39	S/F of Aluminium handles of size 150 mm, cast type,anodised
40	Supply and Fixing of Butt hinges100mm size, heavy weight, cold rolled mild steel, and fixed.
41	Supply and Fixing of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers.
42	S&F of frame size 65X100mm factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
43	S&F of 30mm thick factory made single extruded WPC(wood polymer composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood power)/rice husk/wheat husk and non toxic additives(maximum toxicity index of 12 for 100mgs) having minimum density of 650kg/cum, screw withdrawl strength of 1800N (face)& 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistence to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of engineer-in-charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
44	Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm
45	Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 for water tubing etc., and making good , cutting not exceeding 10cm girth in brick wall.
46	Supplying and laying of CPVC pipes 32 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors, trenches complete all as specified.
47	S & F of PVC (SWR) 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in wall.
48	Supply and Fixing of PVC (SWR) multi floor trap of outlet dia 75mm with grating including jointing with solvent cement.
49	M&L for PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement.
50	S & F of Gun-metal (15mm) , globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.
51	S & F of Gun-metal (25mm) , globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.
52	S & F of 20mm Ball valves set Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s
53	Supply and fixing of cast copper alloy screwed down, high pressure stop cock /angle cock fancy type chromium plated concealed type of size 15mm.
54	Supply and Fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
55	Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.
56	S&F of Rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified(2000 litres).
57	Material and labour for French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats.
58	Cutting of holes in brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar not exceeding half brick wall.
59	Supply and fixing of holdfast made out of 25 X 6 mm flat fixed to window frame.
60	Supply and fixing of 40 mm thick Flush door, shutter solid core construction with block board core and plywood face panels,commercial type of both sides.
61	S & F for 125mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11.
62	S & F of 375mm Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.
63	S & F of 200mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed .
64	S & F of 150mm Extruded brass handles,fabricated type polished.
65	S & F of Aluminium (Die Cast ) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
66	Material and Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3
67	Demolition of cement concrete (unreinforced) of any thickness including plastering.
68	Demolition of brickwork or stone/boulder masonery, built in cement motar or cement lime mortar
69	M & L for Brick work built in CM.1:6 using Sub-Class “B” Bricks,straight or curved on plan exc 6m mean radius .
70	Surface excavation of soft or loose soil, n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out.
71	Excavating in post holes (or similar holes) each n exc 0.50 cu. m, getting out in dense/hard soil including removal of earth from the site and filling the low lying area near by around, in layers not exceeding 25 cm .
72	Earth work excavation in hard/ dense soil for foundation width and depth not exceeding 1.50m and getting out.
73	Earth work excavation in hard/ dense soil for foundation width and depth exceeding 1.50m and getting out.
74	Material and labour for sand filling in foundation including watering and consolidation.
75	Material and Labour for Hardcore of gauge n exc. 63 mm,using broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
76	Material and Labour for P.C.C 1:4:8,D2 type using 40mm graded aggregated in foundation and flooring.
77	Material and labour for cement concrete 1:2:4 Type B2 20mm graded aggregate in foundation filling and mass concrete.
78	M & L for R.C.C, M20, 20mm graded aggregate in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses walls.
79	M & L for R.C.C A1 Type, 1: 1.5: 3 M20, 20mm graded aggregate in foundations, including rafts, footings, plinth beams etc.,
80	M & L for R.C.C M20, 20mm graded aggregate in columns, pillars, piers, posts and struts etc .
81	M & L for R.C.C M20, 20mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.50m span etc.,
82	M & L for R.C.C M20, 20mm graded aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like.etc.
83	Material and Labour for Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter.
84	M & L for form work to sides of RCC Member such as columns, pillars, struts, posts, piers, square,rectangular,polygonal etc.
85	M & L for form work to flat sides and soffits of floor or roof beam, beam, lintels, cantilevers, shelves, columns, slabs including supports, overhangs etc. also splays between floors and beams, etc.
86	M & L for form work to soffits flat rough finish surfaces of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping).
87	Material and labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4.
88	Providing and Fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG(Glass Fibre Reinforced Gypsum) flase ceiling tiles of size 595 X 595mm of approved texture design and pattern having moisture content less than 2%,humidity resistance of 99% NRCO 0.50 to 0.75 as per IS 8225:1987,noncombustible as per BS476(part-40-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped GI section of 0.33mm thick(Galvanished @120 grams per sqm inculding both sides) comprising of main T runner of size15X32mmof length 3000mm,cross Tof size 15X32mm of length 600mm to form grid module of size 600X600mm suspended from ceiling using galvanished mild steel items(galvansing @80 gram perSQM)i.e 50mm long,8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of 85X25X2mm galvanishediron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall/parttion with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specification,drawing and as per dorection of E-I-C.
89	Material and Labour for Providing precast cement concrete slab for landings, cover slabs, drains using type B1 1:2:4 (20mm graded aggregate) set in cement mortor 1:6.
90	Supply and fixing of mild steel reinforcement deformed or twisted bars 10mm dia and over including bending, cranking, hooking and tieing with mild steel wire not less than 0.90mm dia or securing with clips.
91	Supply and fixing of mild steel reinforcement TMT bars 6mm dia to 8 mm dia including bending, cranking, hooking and tieing with mild steel wire not less than 0.90mm dia.
92	M & L for form work to side and soffit (circular / curved) of RCC Member such as foundation , plinth beam shall be of fair finished surface.
93	S & F of Anodised aluminium frame for Powder Coating Partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
94	M & L of 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work or Aluminum farme work
95	S & F of 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane
96	Demolition and breaking up drain pipes of internal dia 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and removing from the site to nearby low lying area.
97	S & F of PVC (SWR) 150mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in wall.
98	S & F of PVC 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.
99	S & F of PVC (SWR) 110mm dia Pipes single socketed, in any length with rubber ring joints fixed in wall.
100	S & F of PVC 75mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors.
101	S & F of PVC Bend 110mm dia any radius,
102	S & F of PVC Bend 75mm dia any radius
103	S & F of 15mm Bib Taps, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule fancy type and chroumium plated (Make:waterman,Metro or equvalent)
104	Supply and fixing of EWC Vitreous China wash down water closet pan (pedestal pattern), white with \\"P\\" or \\"S\\" trap including Wash down water closet (Pedestal pattern), complete High or low level flushing cistern, and connections to pipes and fixing of chain and pull, or lever, if any pvc valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet, ball valve, float and handle including bracket .
105	Supply and fixing of 110mm PVC (SWR) vent cowl
106	Supply and fixing of vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern including provision of lime concrete bedding PVC valveless 10 litre, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern.
107	Supply and fixing of vitreous China wash basin, white, flat back, size 580x450 Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand fixed in repair 32mm sized Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of bore dia 15mm and fixed.
108	Supply and Fixing of Viterous china urinal bowl type including providing and fixing plugs bedding urinals against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screw pointing around urinal around urinal back in cement and waste pipe including ect complete and dismantling of existing urinal complete.
109	Supply and fixing of tubular towel rail of dia 20mm, D type 60cm long of aluminium anodized with and including chromium coated brass screws and wooden /plastic cleats.
110	Supply and fixing of soap dish of size 160 x 160 x 90 mm fixed to plugs with chromium plated brass screws.
111	Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good , cutting not exceeding 10cm girth in brick wall.
112	Taking down 15mm steel tubing and connection inculding cleaning for refixing or removal to stores.
113	Taking down 25mm or 32mmsteel tubing and connection inculding cleaning for refixing or removal to stores.
114	Taking down 40mm or 50mm steel tubing and connection inculding cleaning for refixing or removal to stores.
115	Supplying and laying of CPVC pipes 40 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
116	Supplying and laying of CPVC pipes 25 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
117	Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
118	Supply and Fixing of chromium plated cast copper alloy bib cock of size 15mm.
119	Supply and fixing of stop valves, cast copper alloy screwed down, high pressure stop cock /angle cock fancy type chromium plated with long shank and cup concealed type of size 15mm
120	S & F of Pillar cock chromium plated to wash basin 15mm dia fancy type, with capstan heads, screwed down high pressure with long screwed shanks for iron pipe.
121	M & L of PVC (SWR) gully trap 125/110mm setting and jointing with .chromium plated grating plate
122	M & L of PVC (SWR) floor trap plain of size 75mm with grating including jointing with solvent cement.
123	Supply and Fixing of Aluminium Coat Hooks of soild body of size 175mm to250mm
124	S & F of 20mm Gun-metal,globe or gate valves,with iron wheelhead,screwed both ends for iron pipe and fixed.
125	Welded steel wire fabric supplied and fixed complete to wood or steel members, weight per sqm exceeding 4kg
126	S & F of Wire netting of size 12mm stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples.
127	S & F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.
128	S & F of Steel ventilator with top hung shutter including hinges, steel peg stay, complete
129	Material and labour for painting steel surfaces of any description over 10cm width or grith with two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer including preparing new surfaces .
130	Material and labour for painting two coats of synthetic enamel paint on old steel surfaces including preparation of old surfaces.
131	M & L for painting to wooden surfaces of any description over 10cm width or girth with two coats of synthetic enamel paint over a coat of pink primer including preparing new surfaces.
132	Material and Labour for painting wood work with one coat of synethic enamel paint inculding preparation of old wood painted surfaces.
133	Complete removal of existing treatment on external wall surfaces
134	Material and labour for single coat of priming plastered and other wall surfaces with alkali resistant priming paint including preparation of new surfaces.
135	Material and labour for white washing on ceiling with two coats including preparation of old ceiling surfaces.
136	Material and labour for applying two coat of exterior plastic emulsion over one coat of primer inculding preparation of surfaces on external wall surfaces (new surfaces) all complete. (MAKE:- ASIAN Paint (ACE), Equivalent in NEROLAC, BERGER (Weather coat))
137	Material and labour for applying two coats of internal emulsion paint with one coat primer on internal wall of painted new surfaces all complete.
138	Material and labour for applying two coat of exterior plastic emulsion on external wall surfaces all complete (MAKE:- ASIAN Paint (ACE), Equivalent in NEROLAC, BERGER (Weather coat))
139	Material and labour for Oil Bound Distemper two coats on walls including preparation of old decorated surfaces.
140	Material and labouir for Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same.
141	Material and labouir for Anti-termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall.
142	Supply and Fixing of stainless steel railings of 900mm height with 50x50mm square balusters at 1000mm intervals grouting with necessary chemical grouting and top rail of 80x40mm stainless steel rectangular tubes and with 10mm toughened glass with frosted film as selected with necessary welding and polishing all stainless steel tubles shall be minimum 1.6 mm thick and 304 grade.
143	Supply and Fixing of Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate,grill stops, parts of ranges, balusters and similar articles exceeding 5kg each
144	Removal of debris (rocks) exceeding 250m but not exceeding 500m and depositing where directed.
145	Removal of excavated material (soil) exceeding 250m but not exceeding 500m and depositing where directed.
146	Surface excavation in mud not exceeding 30 cm deep and averaging 15cm deep and getting out.
147	Material and Labour for boulder pitching, hand packed tightly and grouted with CM 1:6.
148	Material and Labour for aluminium composite panel 3mm thick with wooden finish/ plain colour fixed on aluminium section of size 50*25mm
149	Supply and fixing of acrylic letters 300mm height with LED light.
150	Designing of structural member such as footings ,columns,plinth beams,lintel beams,roof beams, stairways,roof slabs etc in ground floor,first floor and second floor inculding submitting such a drawings(Stuctural/Elevation) to EIC for approval for execution.
151	Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare copper earth continuity wire. (Make: Kundan/Finolux/ Havells or suitable equivalent make)a)one light point/one fan point controlled by one switch with cables1.5 sqmm size.
152	Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare copper earth continuity wire. (Make: Kundan/Finolux/ Havells or suitable equivalent make)b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size.
153	Material and labour for Point wiring with 1.5sqmm PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare copper earth continuity wire. (Make: Kundan/Finolux/ Havells or suitable equivalent make)c)One 3 pin socket outlet 5 amps independent, with cables 2.5 sqmm size.
154	Supply & fixing of switch piano, flush type single pole one way 6 amps. (ANCHOR / LEGRAND/ HAVELLS or suitable equivalent make)
155	Supply & fixing of switch piano, flush type single pole one way 16 amps. (ANCHOR / LEGRAND/ HAVELLS or suitable equivalent make)
156	Supply & fixing of Socket outlet 2 in 1, 3 pin, 6 amp flush type (ANCHOR / LEGRAND/ HAVELLS or suitable equivalent make)
157	Supply & fixing of Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type (ANCHOR / LEGRAND/ HAVELLS or suitable equivalent make)
158	Supply fixing and connecting to the system modular type switches 10A single pole one way (Make: LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make)
159	Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module(Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make)
160	Supply, fixing and connecting to the system modular type switch one way 16A, 1 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make)
161	Supply, fixing and connecting to the system of socket, 6/16A-2/3 pin combined modular type 2 module(Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make)
162	Supply & fixing of modular white cover plate with frame 2 module
163	Supply & fixing metal flush box for 2 module plate
164	Supply & fixing of 4 module modular white cover plate with frame
165	Supply & fixing of metal flush box for 4 module plate
166	Supply & fixing of 6 module modular white cover plate with frame
167	Supply & fixing of metal flush box for 6 module plate
168	Supply & fixing of 8 module plate with frame
169	Material & Labour for ceiling rose, 3 Phase/PVC /polycorbonate, isolated body (ANCHOR / LEGRAND/ HAVELLS or suitable equivalent make)
170	Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete.. Make: Philips / Wipro / CG / Havells or suitable equivalent make)
171	Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit (Make: Finolux/Havells/Polycab/ Kundan or suitably equivalent make)a) 2x2.5 sqmm + 1x2.5 sqmm earth wire
172	Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit (Make: Finolux/Havells/Polycab/ Kundan or suitably equivalent make)b) 2x4.0 sqmm + 1x4.0 sqmm earth wire
173	Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit (Make: Finolux/Havells/Polycab/ Kundan or suitably equivalent make)c) 4x10.0 sqmm + 1x10.0 sqmm earth wire
174	Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in Steel conduit (Make: Finolux/Havells/Polycab/ Kundan or suitably equivalent make)a) 2x1.5 sq.mm + 1x1.5 sqmm earth wire
175	Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit (Make: Finolux/Havells/Polycab/ Kundan or suitably equivalent make)b) 2x2.5 sqmm + 1x2.5 sqmm earth wire
176	supply & fixing of lamp holders PVC/polycorbonate type with cord grid cap suitabile for pendant/straight/slanding fittings.
177	Supply, fixing & connecting of 20A, 240V Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB
178	Material and Labour for Brick walls Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth
179	Supply, fixing & connecting to the system of Sheet metal enclosures with single door DB's when MCB'S to be used single pole & neutral 8 way with 200 Amps rated busbar,240V (Make: Legrand/Havells / ABB or suitable equivalent make)
180	Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB's when MCB'S to be used Triple pole & neutral 4 way with 200 Amps rated busbar,415V (Make: Legrand/Havells / ABB or suitable equivalent make)
181	Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.Make: LEGRAND / HAVELLS / ABB or suitable equivalent make)
182	Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SPN 40 to 63 AMP Make: LEGRAND / HAVELLS / ABB or suitable equivalent make)
183	Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SPN 32 AMP Make: LEGRAND / HAVELLS or suitable equivalent make)
184	Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning. TP 25 To 63 AMP(Make: Legrand / Havells / ABB/ or suitable equivalent make)
185	Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 4 core nominal cross section in service connections of stranded conductor..(Make: GLOSTER/ Nicco/ Polycab / kai or suitable equivalent make)
186	Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 4 core.(Make: GLOSTER/ Nicco/ Polycab/ Kai or suitable equivalent make)
187	Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5 core.(Make: GLOSTER/ Nicco/ Polycab/ Kai or suitable equivalent make)
188	Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 70 sqmm, 3.5 core.(Make: GLOSTER/ Nicco/ Polycab/ Kai or suitable equivalent make)
189	Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 120 sqmm, 3.5 core.(Make: GLOSTER/ Nicco/ Polycab/ Kai or suitable equivalent make)
190	Supply, laying or fixing with suitable clamps or passing through pipe, PVC insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 300 sqmm, 3.5core. (Make : Gloster/Nicco/Havells/ Kai or Suitable equivalent make).
191	Excavating in trenches of Hard/Dense soil not Exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable.
192	Material & labour for sand filling for cushioning on U.G cable
193	Materal &labour for Bricks; common burnt clay building bricks sub class B designation 75, Old size bricks for protection to U.G cable
194	Returing, refilling in the excavated trench after laying of power cable including spreading levelling, watering and well ramming in layers not exc 25 cm.
195	Supply & fixing of galvanised steel tubes, medium grade 20 mm dia
196	Supply & fixing of galvanised steel tubes, medium grade 32 mm dia
197	Supply & fixing of galvanised steel tubes, medium grade 50 mm dia
198	Supply & fixing of galvanised steel tubes, medium grade 150 mm dia
199	Demolition of cement concrete of any description and in any position not otherwise specifically provided for
200	Brick work with subclass 'B' bricks straight/curved on plan exc 6m mean radius built in (Cement mortar 1:4)
201	Material & labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete
202	Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)
203	Framed work as in doors or gates of angle or other section with gusset plates, rails braces etc., complete, drilled for fixing of steel sheeting or other covering or light fittings, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete and similar work confirming to Fe-290Gde E-165.
204	Supply & fixing of MCCB 3 pole 415 Volt, fixed type 125 Amps, with breaking capacity 16KA. Make:LEGRAND/ HAVELLS / ABB or suitable equivalent make)
205	Supply & fixing of MCCB 3 Pole , 415 V, Adjustable type, 160 Amps with breakingcapacity 36 KA Make:LEGRAND/ HAVELLS / ABB or suitable equivalent make)
206	Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), 3 Years onsite Warranty.IS 374-2019 Make : Crompton - Energion Riviera/ Atomberg - Renesa Alpha/ Havells - Efficiencia Neo /orient - Hectre 500 / Luker - Eco 30 Neo / Luminous - Triana or suitable equivalent make)
207	Wall Putty : Material and Labour for applying one coat of primer and two coat of white cement based wall care putty of 3mm in new walls/ ceiling including removal of loose/peeloff existing treatment if any and as specified in SSR 2020 part - 1 specification clause 15.19.1 to 15.19.6.4 ( Make: shall be of JK White putty or Birla white wall care putty/ or suitable Equivalent make.
208	Plastic Emulsion: M&L for rendering plastic emulsion/interior emulsion in new walls / ceiling over fair finished laster/ concrete surface over 10 cm width or girth two coat on decorated wall/ceiling and including preparation of old surfaces (asian/nerolac/berger/ or suitable equivalent make.
209	Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make: PHILIPS/Bajaj/CG / Havells /Wipro or suitable equivalent make)
210	Material & Labour for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long)
211	Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make: PHILIPS /GE/ WIPRO /CG/ OSRAM / BAJAJ/ HAVELLS/ SYSKA or suitable equivalent make)
212	Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers (Make: Almonard/ Kaitan/ Crompton or Suitably equivalent make)
213	Supply and Fixing of Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 63A, 415V for welding machines
214	Supply and fixing LED Solar street light fitting 36 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete.
215	Design supply, install testing & commissioning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to serve G + 04 upper floors with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified number of passengers 10. Specifcation sheet enclosed as annexure - 4
216	Supply and fxing of LED ceiling/Recessed mounting fitting complete with suitable LED lamp and accessories,Wattage 24 to 30 watts and minimum system output 1800 lumens. Make: PHILIPS / Bajaj /CG /Havells / Wipro. Or suitable equivalent make)
217	Supply, fixing & connecting of the system cable end termination of size 25 sqmm 4 core including with suitable cable gland & lugs.
218	Supply, fixing & connecting of the system cable end termination of size 16 sqmm 4 core including with suitable cable gland & lugs.
219	Supply, fixing & connecting of the system cable end termination of size 50 sqmm 3.5 core including with suitable cable gland & lugs.
220	Supply, fixing & connecting of the system cable end termination of size 120 sqmm 3.5 core including with double compression suitable cable gland & lugs.
221	Supply & fixing of outdoor terminal box size of 600mm X 600mm X 300mm of 3mm thick. The box shall be dust, vermin & water proof, front door should open by using panel key. the box should be powder coated and door should have the metal beading width of 10mm. the box shall be provided with teak wood plate fixed inside the box on welded bracket with 4 No of 6mm counter sink screws. 2 Nos of 6mm earthing bolts with proper washers and nut at both side.The box should contain power contractor of 32 Amps triple pole, coil voltage 230 Volts, programmable timer with LCD display Make select and Elmaxconnector suitable for 16 sqmm cable (10 Nos).
222	Supply, fixing & connecting of the system cable end termination of size 300 sqmm 3.5 core including with suitable double compression cable gland & lugs.
223	Supply of single indoor type 150 watts LED high bay roof light fitting as per the technical specifications specified in annexure - 2. Make of fitting: Havells/ Wipro/ Surya/ Bajaj/ C&S Electric/ Panasonic/ Halonix/ CG/ Phillips or suitable equivalent make)
224	Labour charges for replacement of HPMV/MH high bay light fittings with LED high bay roof light fittings including necessary fixing arrangements
225	Supply & fixing of MCBDB 4 way(DPX160+12) legrand make as per legrand 2022 catlogue No.507745 / ABB/ Havells or suitable equivalent make)
226	Supply & Fixing of MCCBDB 8 way (DPX250+24). Make: Legrand or any reputed make., CAT No.507759
227	Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 120 sqmm 3.5/4 core Make: Raychem or suitably equivalent make.
228	Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 50 sqmm 3.5/4 core Make: Raychem or suitably equivalent make.\
229	Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 35 sqmm 3.5/4 core Make: Raychem or suitably equivalent make.
230	Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 25 sqmm 3.5/4 core Make: Raychem or suitably equivalent make.
231	Material & Labour for straight through heat shrink type cable joint, complete with jointing material and accessories suitable for PVC armoured under ground cable of size 16 sqmm 3.5/4 core Make: Raychem or suitably equivalent make.
232	Supply & fixing of GI Pipe 2.5 inch (50mm) Dia of class \\"B\\" grade 1.5 mtr length 3mm thick. At one mtr length it has to be made 120 degree offset for cable entry purpose in coping of poles.
233	Supply and fixing of MS flat iron support clamp/ bracket for street light arm of 40mm width, 6mm thick cut into 4x0.45m lenth for each pole including bolts, washers, nuts and bending, drilling any shape or size n. exc 10 kg each.
234	Supply and fixing of GI Pipe 32mm Dia of class \\"B\\" grade 2 meter length 3mm thick. At one metre length it has to be made 135 degree bend without any damage and shape for fixing street light fittings.
235	Supply & fixing of outdoor street light terminal box size of 300mm X 400mm X 200mm of 3mm thick. The box shall be dust and vermin proof. The joints of the box shall be fully welded. The box should have heavy duty hinges and front door should open by using panel key. The box and door should have the metal beading width of 10mm and 15mm respectively. the rubber / PVC beading should be provided around the box cover for water proof. the box shall be provided with teak wood plate fixed inside the box. The wooden plate should not have more than one joint. the size of wooden plate shall be fitted with welded brackets inside the box with 4 Nos of 6mm counter sunk screws. The box shall be provided with 2 Nos of 6mm earthing bolts 2 nos of plain washers and one spring washer with nut at both side, two nos of brackets (flat size of 30mm x 6mm) and two nos clamps( 40mm width x 6mm thick) of required shape for mounting the box on pole. The box shall be provided with 6Amps MCB and 4 numbers of DIN rail connector model CBT-110, make-Elmex, 50sqmm to be fixed on the wooden plate along with suitable channel.
236	Supply, fixing and connecting to the system modular type switch one way 20A, Single pole 2 module. (Make:LEGRAND MYRIUS/ Litaski/ Crabtree or suitably equivalent make)
237	Supply & fixing metal flush box for 8 module plate
238	Supply & fixing of 12 module plate with frame and metal flush box
239	Supply & fixing of 16 module plate with frame and metal flush box
240	Supply & fixing of modular type Dummy plate
241	OUT DOOR FPB consisting of 200A MCCB-1 No for incomiong, outgoing feeders are 63A MCCB-6 Nos. Specifcation sheet enclosed as annexure -1(1.0.1 to 1.0.9.5).
242	Supply & fixing of outdoor street light terminal box size of 200mm X 200mm X 150mm of 3mm thick. The box shall be dust, vermin & water proof, front door should open by using panel key. the box should be powder coated and door should have the metal beading width of 10mm. the box shall be provided with teak wood plate fixed inside the box on welded bracket with 4 No of 6mm counter sink screws. 2 Nos of 6mm earthing bolts with proper washers and nut at both side. two nos of mounting brackets (flat size of 30mm x 6mm) shall be welded and two nos clamps( 30mm width x 6mm thick) for mounting the box on pole. The box shall be provided with 6Amps SP MCB and four numbers of DIN rail connector model CBT-110, make-Elmex or suitable equivalent make, Fixed on the wooden plate along with suitable channel.
243	Supply , Fixing & commissioning of Indoor LT PANEL consisting 630A MCCB -1 No for incoming, outgoing feeders are 400A MCCB-2 Nos, 250A MCCB-3 Nos, 100 A MCCB - 2 No. Specifcation sheet enclosed as annexure -2(1.0.1 to 1.0.12.6).
244	Supply, Fixing & commissioning of indoor LT PANEL consisting 400A MCCB -1 No for incoming, outgoing feeders are 250A MCCB-4 Nos, 100A MCCB-3 Nos, 63 A MCCB - 3 No. Specifcation sheet enclosed as annexure -3(1.0.1 to 1.0.12.6).
245	Supply and fixing of 1.50 Ton Invertor 5 star rating unit.(Make : Blue Star / Daikin / Voltas or suitably equivalent make)
246	Supply and fixing both suction and discharge copper pipe along with insulation for split unit.
247	Excavating in trenches hard dense soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying cable.(.3 x .75 x 1300)
248	Suppling and filling levelling and consolidated sand to a thickness 15 cm trenches over the telephone cable for cushioning.
249	Refilling the excavated soil in the trench including spreading and levelling
250	supply and laying old size burnt bricks sub class B in width wise over the telephone cable
251	Material and Labour for cement concreating with 3/4 blue metal 1:2:4 type B ( For road cutting or concrete cutting areas)
252	excavation In trenches 30 cm wide 15 cm depth disintegrated rock for laying UG cable to a lead distance of 26 meters (For road and concrete cutting areas)
253	Supply and laying of G.I Pipe medium grade 50mm Dia
254	supply and fixing of non metalic rigid PVC Pipe size of 25 mm Dia including all fixing like bend, tee, fixing clamps, etc
255	Laying of cable by drilling under the stone set road for a lead distance of 45 meters and minimum diameter of 2.5\\" with HDPE pipe (without damaging the existing underground power cable and telephone cables)
256	supply and laying in the trench and /or in the cable tray including termination of 100 pair jelly filled armoured underground coper telephone cable (Make : Finolex or vindhya or delton or equivalent )
257	supply and laying in the trench and /or in the cable tray including termination of 50 pair jelly filled armoured underground coper telephone cable (Make : Finolex or vindhya or delton or equivalent )
258	supply and laying in the trench and /or in the cable tray including clamping and termination of 20 pair jelly filled armoured underground coper telephone cable (Make : Finolex or vindhya or delton or equivalent )
259	supply and laying in the trench and /or in the cable tray including termination of 10 pair jelly filled armoured underground coper telephone cable (Make : Finolex or vindhya or delton or equivalent )
260	supply, laying and termination of 5 pair PVC telephone coper cable (Make : finolex, five star or delton or equivalent)
261	supply and fixing of powder coated wall mountable telephone distribution box - 400 pairs
262	supply and fixing of powder coated wall mountable telephone distribution box - 200 pairs
263	supply and fixing of powder coated wall mountable telephone distribution box - 100 pairs
264	supply and fixing of powder coated wall mountable telephone distribution box - 20 pairs
265	Supply and fixing modular white cover plate with frame 4 module
266	Supply and fixing modular metal flush box for 4 module plate
267	Supply and fixing of telephone cable route indicator: route marker shall be made out of 100mm x 100mm x 5mm cast iron bolted or welded on 35mmx35mmx6mm MS angle iron of 600mm long. Such indicators grouting with proper concreting work marked as \\"TEL CABLE\\" in every 10 meters.
268	Supply of Digisol Cat6 I/O
269	Supply of Digisol Faceplate
270	Supply of Back Box
271	Supply of Digisol 24 port patch panel fully loaded
272	Supply of Digisol Cat 6 patch cord 1 Mtrs
273	Supply of Digisol 12 port LIU LC SM loaded
274	Supply of Digisol 12 Core fiber Cable SM
275	Supply of Digisol Media SC loaded
276	Supply of Digisol 24 port managed POE Switch With SEP Port
277	Supply of 4U Netrack
278	Supply of Digisol Cat6 Cable
279	Excavation of soil not exceeding 0.5 mtr. deep and 75cm wide and getting it out and depositing the same on the sides for refilling as directed for laying HDPE pipes
280	Supply and laying of HDPE pipe of size 20mm dia. for laying in trenches
281	Installation Charges for items Sl.No.268 to 280 Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Construction Tenders

Fencing Work Tenders

Wall construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repairs To Walls, Floors And Roofs In Hvfts At Hvf, Avadi., Hvf Training School, Avadi-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repairs To Walls, Floors And Roofs In Hvfts At Hvf, Avadi., Hvf Training School, Avadi-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us