|
| 1 | CSM Ajnala Make:- Triveni Turbine frame No. 14A.33/1990 & 14A.61/1991 |
| 2 | Supply of set 1st stage nozzle with spacer & end piece |
| 3 | Supply of welded diaphragm 2nd stage |
| 4 | Supply of welded diaphragm 3rd stage |
| 5 | CSM Batala Make:- Triveni TST-1150-HR-29 14 MW, working pressure-87 kg/cm². Max Temp.510° c, Back Pressure |
| 6 | Part A 1 Lub Oil filter element 16 micron |
| 7 | Control oil filter - 451GPM-10 Micron |
| 8 | Emergency oil filter element |
| 9 | TV lifting spindle |
| 10 | Bearing Rod End |
| 11 | Bearing Spherical |
| 12 | Speical Stud |
| 13 | Cap Nut |
| 14 | Over speed trip shaft with gear |
| 15 | Valve for over speed trip & spring |
| 16 | Solenoid coil 110 V |
| 17 | Vibration probe |
| 18 | Extension cable |
| 19 | Drivers |
| 20 | Oil Filter element for oil MIST Separator (1 Set = 07 Nos.) |
| 21 | Sher pin for Lsd coupling (01 Set = 10 Nos.) |
| 22 | Part B Alternator (TDPS, TC-150) Elec. Spares |
| 23 | Discharge Resistor Set |
| 24 | Diode Set (6 Positive + 6 Negative) |
| 25 | Shaft Earthing Brush |
| 26 | Shaft Earthing Brush Holder |
| 27 | Bearing Temp. Detector (Resistance Type) |
| 28 | Laby rinht seal for DE side (Outside+inside) |
| 29 | Labyrinth seal for NDE side (Outside + Inside) |
| 30 | Relay 3 C/O 24 V DC |
| 31 | Unitrol 6080 DI Converter |
| 32 | Power Supply Unit |
| 33 | Surge Suppressor |
| 34 | Potential Transformer, PTI-PT3 |
| 35 | Current Transfer, CT9-CT11 |
| 36 | HT Fuses, HF1-HF3 |
| 37 | HT Fuses, HF4-HF6 |
| 38 | Current Transformer, CT2-CT4 |
| 39 | Current Transformer, CT5-CT7 |
| 40 | Check sysnchronising Relay |
| 41 | Auto Synchronising |
| 42 | No Volt Relay |
| 43 | Power Contractor, 150A |
| 44 | Power Contractor, 25A |
| 45 | Field Failure Relay |
| 46 | Soft Starter |
| 47 | Power Supply Unit |
| 48 | Signal Isolator |
| 49 | PLC For Turbine Trip |
| 50 | Temperature Scanner |
| 51 | 110V DC Relay, 2C/O |
| 52 | 24V DC Relay, 2C/O |
| 53 | CSM Budhewal Spares for power Turbine 14A/010/1986 Make Triveni |
| 54 | Labyrinth packing (Steam Side & Exhaust Side with Lock spearing) |
| 55 | High Speed coupling with bolt |
| 56 | Gear Plain bearing |
| 57 | Gear thrust bearing |
| 58 | Oil seal labby (Steam side & exhaust side) |
| 59 | Bolt with nylock nut for main coupling (Gear/Alternator) |
| 60 | Oil Filter 45GPM |
| 61 | Oil Filter 8 GPM |
| 62 | Spares for mill Turbine 290 mm Make:- Triveni |
| 63 | Gear thrust bearing |
| 64 | Gear Plain bearing |
| 65 | T.V Roller |
| 66 | T.V Roller Pin |
| 67 | T.V Level Pin |
| 68 | Pivot pin with nylock nut 3/8\\", 1/21, 1/4\\" |
| 69 | Labyrinth packing (Steam side) |
| 70 | CSM Fazilka Frame: TST-290mm Turbine SL. No.167 & 168 Mfg. unit Bangalore |
| 71 | Throttle Valve Turbine and gear box casing parting plane stud with cap nut |
| 72 | Rotor Fore & rotor after bearing |
| 73 | Lay shaft gear with trip shaft gear |
| 74 | Gear fore & after bearing |
| 75 | Lay shaft fore and after bearing |
| 76 | Power Turbine fram: FR550 Turbine Sr. No. 550-104 Make:- Triveni |
| 77 | MOP Bushes |
| 78 | MOP Driving Gear |
| 79 | MOP Driven Gear |
| 80 | APO Pump |
| 81 | Rotor Rear Bearing |
| 82 | Rotor Front Bearing |
| 83 | Pinion Front Bearing |
| 84 | Pinion Rear Bearing |
| 85 | Gear Wheel Front Bearings |
| 86 | Gear Wheel Rear Bearings |
| 87 | Governor weight, Fulcurm pin with washer, thrust rise carrier, bearings (629z,7205,6308, QJ307) |
| 88 | Lube Oil PRV |
| 89 | Throttle Valve with spindle and lock nut |
| 90 | LP Trip spring |
| 91 | Man Stop valve power turbine 6\\" |
| 92 | Emergency stop valve mill turbine 4\\" |
| 93 | Blower full body power turbine |
| 94 | CSM Gurdaspur Turbine 28.5 MW TST 2300-ER-27 Make:- Triveni. |
| 95 | O Ring 4-1-N-M409 Check valve ESV |
| 96 | O Ring Seal OD 77 x ID 71 X Dia 3 MM |
| 97 | O Ring Seal OD 102 x ID 96 x Dia 3 MM |
| 98 | O Ring Seal OD 69 x ID 63 x Dia 3 MM |
| 99 | O Ring 22-3-N-M409 |
| 100 | O Ring Seal OD 45 x ID 33 x Dia 6 MM |
| 101 | Chevron Seal S 1012-M35 x 50 x 21/3 |
| 102 | Bottom Bush |
| 103 | Retainer M-52 x 2P - 25-33-50-M703/Gland Adjusting Nut |
| 104 | Sealing Ring -48 x 32 x 8 (Open) |
| 105 | Sealing Ring -48 x 32 x 8 (Close) |
| 106 | Set of elements for oil mist separator (01 set + 7 No.s) |
| 107 | O ringh 32-2.7 RU 4013-M409 |
| 108 | Spring CO-9.52-6.35-1.58-80-M804 |
| 109 | Lube Oil filter element 15M-1135 LPM |
| 110 | Control Oil Filter Element 45 IGPM-10 Micron |
| 111 | EOP Oil Filter element 400 LPM, 10u |
| 112 | Spring for LP Trip |
| 113 | Oil Inlet Fitting with O Ring |
| 114 | RTD Embedeed Duples 10.8 Mtr-15mm-3.2mm |
| 115 | 3 way solenoid valve |
| 116 | 2 way solenoid valve |
| 117 | Woodward MPU |
| 118 | Set of Shear pins for LS coupling (01 Set-10 nos.) |
| 119 | MOP Coupling |
| 120 | Activity proximity probe (Woodward MPU) |
| 121 | Pinion Shaft Journal Bearing Fore End |
| 122 | Pinion Shaft Journal Bearing after end |
| 123 | CSM Morinda Spares for TST-525mm, Serial No. 39, Fibrizor Turbine |
| 124 | HP and LP Labyrinth with Leaf spring |
| 125 | Inter Holder |
| 126 | Oil Seal Labyrinth |
| 127 | Gear for Bearing (Thrust) |
| 128 | Main Oil Pump |
| 129 | TST-290 mm /040 1st Mill Turbine spare |
| 130 | Laby Holder |
| 131 | Casing stud with nut |
| 132 | Throttle valve spindle |
| 133 | Governor internal assembly |
| 134 | CSM Nakodar Mill and power turbine spares Make:- Triveni TST-290 |
| 135 | Diaphragm of mill Turbine No. 1 (TST-290mm) |
| 136 | First stage Nozzle of mill Turbine No. 01 (TST-290mm) |
| 137 | MOP 35 GPM of mill Turbine No. 1 (TST-290mm) |
| 138 | Relay cylinder spindle and piston with compression spring (TST-290mm) |
| 139 | Throttle valve seat with spindle (TST-290mm) |
| 140 | Throttle valve Fitting (TST-290mm) |
| 141 | MOP 45 GPM of power Turbine (F14/14A) |
| 142 | Throttle valve spindle (F14/14A) |
| 143 | Beaing DMJT 1-1/4\\" |
| 144 | Thrust pad active (F14/14A) |
| 145 | Thrust pad non active (F14/14A) Please Enable Macros to View BoQ information |
