|
| 1 | Schedule 'A' Part-I to Schedule 'A' Part-X:Note: Schedule 'A' Part-I to Part-X are prepriced by MES. Bidders shall insert their lump sum amount in green coloured field under Column 6 only. |
| 2 | Lump Sum price worked out by the contractor for 'Buildings & Structures', as listed in Schedule 'A' Part-I |
| 3 | Lump Sum price worked out by the contractor for 'Site Clearance/Area Development/Earth Work/Excavation', as listed in Schedule 'A' Part-II |
| 4 | Lump Sum price worked out by the contractor for 'INTERNAL WATER SUPPLY', as listed in Schedule 'A' Part-III |
| 5 | Lump Sum price worked out by the contractor for 'Internal Electrification', as listed in Schedule 'A' Part-IV |
| 6 | Lump Sum price worked out by the contractor for 'External Water Supply', as listed in Schedule 'A' Part-V |
| 7 | Lumpsum price worked out by the contractor for 'External Electrification', as listed in Schedule 'A' Part-VI |
| 8 | Lump Sum price worked out by the contractor for 'Sewage Disposal', as listed in Schedule 'A' Part-VII |
| 9 | Lump Sum price worked out by the contractor for 'Road/Path/Culvert', as listed in Schedule 'A' Part-VIII |
| 10 | Lump Sum price worked out by the contractor for 'Cooling Appliances', as listed in Schedule 'A' Part-IX |
| 11 | Lump Sum price worked out by the contractor for 'Hot water supply', as listed in Schedule 'A' Part-X |
| 12 | Schedule 'A' Part-XI: (Miscellaneous Items) |
| 13 | INTERNAL ELECTRIFICATION: |
| 14 | Ponit wiring with 1.5 Sq.mm. FRLS PVC insulated unsheathed copper conductor multistranded 1100 Volts grade, ISI marking drawn thorugh and inculding non metallic PVC rigid concealed conduit and conduit accessories medium grade, ISI marking, including pressed steel terminal box made with MS sheet 2mm thick suitable for fixing switches, sockets, inculding one run of 1.5 Sq.mm. PVC insulated unsheathed copper cable for earth continuity, connected to earth duly complete all as specified and directed for One light point controlled by one switch or One bell point controlled by bell push or One fan (ceiling/Wall/Ex.fan) point controlled by one switch or One 3 Pin socket outlet 5 Amps socket on independent board. |
| 15 | All as per item No. 11 here-in-before but one light point controlled by two Nos. two way switches complete all as specefied and directed. |
| 16 | All as per item No. 11 here-in-before but One 3 pin socket outlet 15 Amps on independent board with 2.5 Sq.mm. FRLS PVC wire and one run of 2.5 Sq.mm. copper cable for earth continuty. |
| 17 | M&L submain wiring concealed type for single phase supply with PVC insulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC rigid conduit medium grade 20mm dia. with acessories complete with two runs of 4 Sq.mm. cable and one run of 4 Sq.mm. earth wire complete with colour coding and making good the disturbed area complete all as specified and as directed. |
| 18 | M&L submain wiring concealed type for single phase supply with PVC insulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC rigid conduit medium grade 20mm dia. with acessories complete with four runs of 6 Sq.mm. cable and one run of 6 Sq.mm. earth wire complete with colour coding and making good the disturbed area complete all as specified and as directed. |
| 19 | M&L submain wiring concealed type for single phase supply with PVC insulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC rigid conduit medium grade 20mm dia. with acessories complete with four runs of 10 Sq.mm. cable and one run of 10 Sq.mm. earth wire complete with colour coding and making good the disturbed area complete all as specified and as directed. |
| 20 | All as per item No. 14 but with two runs of 6 Sq.mm. cable and one run of 6 Sq.mm. earth wire.Note for Item Nos. 14 & 17: Two runs of cable, one run of earth wire and one run of conduit will be measured as one unit. |
| 21 | S&F concealed in wall MCB DB vertical type double door TPN 4 way 415 Volts, 50 Hz, IP 43 protection with 200 Amps rated bus bar, including provision as incommer MCCB FP up to 160 Amp and outgoing circuits complete, fill empty with blanks, making good the disturbed area as per existing surface complete all as specefied and directed. |
| 22 | Supply and fixing Energy efficient LED tube light fitting(mirror light) with tube 5 watts or nearest size, 240V,50hz surface mounted,decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly,energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed |
| 23 | Supply and fixing Energy efficient LED tube light fitting(mirror light) with tube 10 watts or nearest size, 240V,50hz surface mounted,decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly,energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed |
| 24 | Supply and fixing Energy efficient LED tube light fitting with tube 20 watts or nearest size, 240V,50hz surface mounted,decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly,energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1.0 sq mm 3 core flexible copper conductor cable complete all as specified and directed |
| 25 | S&F ceiling fan AC single phase 230 Volts of size 1200mm sweep with all fixtures, 5 Star rating, metallic body, brushless direct current motor (BLDC) complete with and inclussive of making necessary electric connection from ceiling rose to fan through twin core flexible wire all as specified and directed. |
| 26 | S&F exhaust fan 300mm sweep, plastic body (Heavy duty), complete with louvers suitable for operation on 230 Volts AC, 50 Hz fixed on wall making opening, fixing and making good the distrubered surfaces etc. complete all as spcified and as directed. |
| 27 | S&F exhaust fan 250mm sweep, plastic body (Heavy duty), complete with louvers suitable for operation on 230 Volts AC, 50 Hz fixed on wall making opening, fixing and making good the distrubered surfaces etc. complete all as spcified and as directed. |
| 28 | Supply and fixing Energy efficient LED tube light fitting ,2 x 20 watts on nearest size, 240V, 50 Hz surface mounted, decorative ultra slim square profile LED lighting fixture with extruded polucarbonate environmental friendly, energy efficient ready to use pack of complete with mounting bracket etc including connecting up with 1 sq mm 3 core flexible copper conductor cable complete all as specified and directed |
| 29 | Supply and fixing LED Security light fitting with tube 30W New generation Energy saving & environmental friendly long lifemade up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening separate driver compartment with IP66 protection pre wired with1.0 Sq mmcopper conductor cable cable upto connector including 1.5 m long GE Tubing light grade of 32 mm dia bend to shape for fixing on wall/pole with suitable MS brackets nuts and bolts etc complete all as specified and as directed. |
| 30 | M&L for earthing complete with GI earth plate electrode 60cmX60cmX 6mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI earth lead wire 4mm dia. by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C1 as in pit, 20mm dia. GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe connected up to DBs, and suitable CI top cover with handle, funnel, strainer, char coal and testing on completion all as specified and as directed.Note: Rate quoted deemed to be include excavation and earth work in any type of soil with PCC type C1 in pad and pit complete all as specefied and directed. |
| 31 | M&L for 4mm dia galvanised iron or steel wire earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required complete all as specified and as directed. |
| 32 | EXTERNAL WATER SUPPLY: |
| 33 | Labour charges for Cutting existing water pipeline of dia 40 or 50 mm for alterations or additions done in position without taking down and Screwing existing waterpipeline of dia 40 or 50 mm for alterations or additions (or lengthening screw on pipe to form connector) |
| 34 | EXTERNAL ELECTRIFICATION: |
| 35 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm , 3.5 core including connecting with suitable size cable glands and lugs all as directed at site. |
| 36 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm, 3.5 core including connecting with suitable size cable glands and lugs all as directed at site. |
| 37 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm, 2 core including connecting with suitable size cable glands and lugs all as directed at site. |
| 38 | Supply, laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm, 2 core including connecting with suitable size cable glands and lugs all as directed at site. |
| 39 | M & L for cable route indicator 150mm dia 3mm thick made out of cast aluminum duly marked with size and type of cable fixed on 40x40x6mm angle iron support embedded in PCC 1;2:4 type B1 using 20 mm graded (300x300x400mm size) and painted with 2 coats of anticorrosive paint over a coat of red oxide primer all as specified and as directed. |
| 40 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 41 | S & F pole mounting type FRP cable looping box, IP66 , with connector of size 155 x 210 x 92 mm with 40 x 6mm flat iron including suitable brass gland, lugs etc and terminal box to be fixed on pole with suitable fixing arrangement all as specified and as directed. |
| 42 | Material and Labour for GI bracket made out of 32 mm dia GI pipe length 1.50m, bent to an angle of 30 degree and fixed with 40mm x 6mm flat iron, including suitable 02 set of clamps with nut , bolts ,and washers for fixing of light to pole, complete all as directed by Engineer -in- charge. |
| 43 | M&L for preparation of new 9 mtr long concrete pole surfaces and applying two coats of cement based paint over a coat of primer etc complete all specified and as directed. |
| 44 | Supply, installation, testing and commissioning of outdoor LT feeder pillar box, CPRI approved factory fabricated by seven tank pre-treatment process with doors and suitable latch & gasket followed by powder coated painting including PCC foundation for erecting the panel board. The outer shell shall be made out of 3.15 mm thick CRCA sheet & MS angle (40x40x6mm) frame, factory fabricated with front & back openable, double door system lockable by keys from both sides with chromium plated locks and 'U' type gasketfor door to make the outer shell completely vermin proof. The bottom of the outer shell contains a detachable plate of thickness 3.15 mm powder coated having provision for entry of armoured cable of adequate size with glands. The ourter shell shall be powder coated Seimens grey structural RAL 7032 shade. Inner shell shall be made out of 2.0mm thick CRCA sheet duly compartmentalized for each control gear, front & back openable single door system lockable/ openable by keys from both sides having chromium plated locks (2 Nos in each compartment) having louvers & air vent gasket for natural flow of air. Contd... |
| 45 | The TPN busbar shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size \\"F' class insulator made on non hygroscopic, non combustible, track resistant, high strength FRP/ SMC/ DMC material at an appropriate interval throughout the length of the TPN busbar of the panel. The busbar chamber comprising of high conductivity aluminium busbar of capacity 200 Amps three phase and half the cpacity for neutral. The panel board shall be suitable to accommodate the following items complete as specified and directed. (Main FPB)(a) MCCB 415V, 125A, 4 pole,16KA - 01 No. (I/C)(b) MCCB 63 A, 415V, 4 pole, 16kA - 02 Nos.(c) MCCB 25 A, 415V, 4 pole, 16kA - 02 Nos. (d) MCB 10A, 415V, TPN, 10kA, B-Curve - 02 Nos.(e) MCB 6A, 240V, SPN, 10kA B-Curve - 04 Nos.(f) Astronomical timer switch - 01 No.(g) Digital multifunction panel meter flush mounted - 1 No.(h) LED phase indication lamp (Set of 3) - 05 Nos. |
| 46 | Supply , erection, testing of maintainance free chemical earthing by auguring & installation of copper bonded rod using machine bore and filling with backfill compound using copper bonded rod of dia 20 mm , length 3m , made of low carbon high tensile steel with copper plated (250+ microns) for preventing external corrosion, with top end connected with copper plated welded busbar terminal of dimension 150mm x 50mm x 6 mm , complete conforms to IS : 3043 - 1987 and carbon based, high conductive backfill compound 'Conductolite' with resistivity < 0.5 ohm-metre (In dry conditions) & resistivity is non-moisture dependant, pH Value : 8.0 - 9.0, electronic & ionic conduction, less susceptible to shrinkage, with hygroscopic & corrosion resistive properties and covering with heavy duty polyplastic earth pit chamber cover.Make : M/s Ashlok Safe Earthing Electrode Limited or any other approved make |
| 47 | SEWAGE DISPOSAL |
| 48 | M&L for construction of 100 users RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil & rock, PCC 1:4:8 below foundation,RCC M-30 Design Mix in Walls,Base Slab, Baffle walls and Roof Slab including beams etc with Vent shaft,manhole openings with effective depth of 1.5 meter and overall depth of 3 meter for conventional all as specified and shown on Drg No. TD-389(S), Sheet No. 1/3 - 3/3 |
| 49 | M&L for contruction of Soakage wells of Size (4.30 M Dia X 2.40 m deep) excavation in any type of soil & rock, foundation in P.C.C 1:3:6, solid block masonry walls with peep holes, with top ring of M30 including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M30/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as specified and shown on Drg No. TD-318(S), Sheet No. 1/1 |
| 50 | M&L for earthing complete with galvanized earth plate electrode 600x 600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to galvanized iron strip of 32x6mm (up to 7.5m in length from earth plate) by means of brass bolts and nuts checknuts and washers of brass all as specified and shown in electrical plate no 3 of SSR part 1 including charcoal and rock salt with necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with CI Cover 10mm thick hinged to CI frame with MS bar 6mm dia. 150mm c/c reinforcement, watering funnel, 50mm dia. light grade pipe for protection of earth electrode and 20mm dia. pipe for watering all as specified and directed and tested on completion complete all as specified and as directed. |
| 51 | M&L for GI earth strip of size 32x6mm with saddles and fixing screws etc. for roof/wall complete all as specified and as directed. |
| 52 | S&F metal and plug socket combination 32 Amps, TPN type for lift machine complete all as specified and as directed. |
| 53 | COOLING APPLIANCES: |
| 54 | Supply and fixing of GI powder coated brackets for fixing of split Acs including grouting with suitable size fastners complete all as specified and directed. |
| 55 | Supply and fixing copper pipe 1/2\\" dia with foam insulation including connecting complete all as specified and directed. |
| 56 | Supply and fixing copper pipe 1/4\\" dia with foam insulation including connecting complete all as specified and directed. |
| 57 | Supply and fix drain pipe PVC from indoor unit (at any floor) to ground floor level and is to be fixed with necessary clamps complete all as specified and directed. |
| 58 | Supply and fix four core wire 1.5 Sqmm interconnecting cable IDU- ODU complete all as specified and directed. |
| 59 | Supply and fix refrigerator, electric driven (single phase), capacity 460 litres BEE 5 star rated complete all as specified and directed. |
| 60 | M&L for laying 63 mm nominal dia double walled corrugated HDPE Pipe inner plain, ring stiffness/crush resistance 750 N with Rubber Ring joint & Non-Pressure Fitting complete all as specified and directed. |
| 61 | M&L for laying 40 mm nominal dia double walled corrugated HDPE Pipe inner plain, ring stiffness/crush resistance 750 N with Rubber Ring joint & Non-Pressure Fitting complete all as specified and directed. |
| 62 | M&L for Point wiring complete with FRLSH PVC insulated unsheathed cable 100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including stove enamelled steel conduit 20mm dia (ISI marked) and accessories concealed in wall including breaking of wall and making good wall/surface of ceiling with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switched, socket outlets regulators etc, including provision of FRLSH PVC insulated unsheathed 1.5 Sqmm FRLSH multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly completed for one light/fan point controlled by one, one way switch all as specified and a directed. |
| 63 | Supply and fix LED light fitting 1x 16 watt flame proof, CMRI certified recommended for gas/vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die-cast aluminium housing with heat resistant toughened glass with LED tube light fixtures, driver, holders, connectors etc., complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable complete all as specified and as directed. |
| 64 | Supply and fixing flameproof switch rotary type with termination box in LM6, 16A, single pole 240V, IP 67 protection complete as per specified and directed. |
| 65 | Supply and fixing flameproof exhaust fan of size 300mm including fixing all as specified and directed. |
| 66 | S&F Flame Proof / weather Proof lighting distribution panel SPN & 4 way, Incoming MCB - 2P, 16Amp/ 25Amp - 01 No, Outgoing MCB, SP, 6 Amp/ 10 Amp - 02 Nos with complete internal bus bar & wiring upto terminal complete all as specified and as directed. Please Enable Macros to View BoQ information |
