|
| 1 | Charges for Disassembly and Reassembly( Details to be provided in Annexure -1) |
| 2 | Machining Charges for worn out components after inspection( Details to be provided in Annexure -2) |
| 3 | Mandatory Spares ( EC - Not Applicable) CD-NON EXEMPTED ( Details to be provided in Annexure-3) |
| 4 | Mandatory Spares (EC Applicable) CD EXEMPTED (Details to be providedin Annexure -4) |
| 5 | Spares Subject to Inspection (EC Applicable)STI CD EXEMPTED ( Details to be provided in Annexure -5) |
| 6 | Installation & Commisioning charges( Details to be provided in Annexure -6) |
| 7 | Charges for Disassembly and Inspection ( Details in Annexure -1) |
| 8 | Labour/service charges for repair/overhaul & reassembling |
| 9 | Reconditioning of Counterbalance cylinders. |
| 10 | Reconditioning of IBOP Actuator cylinder |
| 11 | Reconditioning of Link Tilt cylinders |
| 12 | Rebuild of Pin Holes and reconditioning of Clamp cylinder. |
| 13 | Rebuild of Pin Holes and Reconditioning of gate for Clamp cylinder |
| 14 | Reconditioning of 6\\" accumulator |
| 15 | Reconditioning of 4\\" accumulator |
| 16 | Service Hydraulic Pumps Piston |
| 17 | Service Hydraulic Pumps Vane |
| 18 | Service Hydraulic Motors |
| 19 | Machine-out the existing torque arrestor tubes & replace with new one |
| 20 | Rebuild of Pin Holes and reconditioning of Torque arrestor Body |
| 21 | Service Hydraulic Motor (Slave) and replace seal kit / replace the motor |
| 22 | Test and set additional Hydraulic; Manifold on the test bench. |
| 23 | UT wall thickness of S pipe and repair worn out area |
| 24 | UT wall thickness of hydraulic manifold and deflection check |
| 25 | Repair the damaged carriage assembly. |
| 26 | Repair of Bogie |
| 27 | RLA stem to be modified to new-retro fit type, followed by machining, chroming, grinding etc. |
| 28 | Weld-repair & machine the guide track pin bore & damaged surface. |
| 29 | Repair the accessories such as tie -back, cable mounting bracket, etc |
| 30 | Upper and Lower IBOP Inspection, Testing and parts replacement |
| 31 | Replace damaged cables (1. Carryout the insulation test on service loops. 2. Carryout the continuity test on auxiliary cable & composite cable. 3. Repair the damaged insulation on service loop cables.) |
| 32 | Limited Servicing of Main electric drill motor VAR II, |
| 33 | Limited Servicing of electric Blower motor |
| 34 | Limited Servicing of electric Hydraulic pump motor |
| 35 | Servicing of VFD house AC (Carryout cleaning Servicing of electrical & drive component, complete servicing of Existing Aircon units.) |
| 36 | Install new gasket, replace all switches & Potentiometers, install new RPM & Torque Meters. |
| 37 | VFD House refurbishment Limited to - Installation of rubber mats in VFD House. Repair of existing VFD house roof. |
| 38 | Repair of S pipe Adapter |
| 39 | Replacement of Mail Sub in S pipe. |
| 40 | Repair of RLA body. |
| 41 | Removal of stuck Bail pin from Gear box housing |
| 42 | Bail pin bore repair and sleeving in Gearbox body. |
| 43 | Removal of broken dowel pins & bolts and repair of damaged holes, treading in Gear box Body. |
| 44 | Repair of Gear box Cover. |
| 45 | Repair, metalizing of Taper roller bearing seating area of main shaft |
| 46 | Rewinding of Main electric drill motor VAR II |
| 47 | Repair of Landing Collar |
| 48 | Repair of Retainer Landing Collar |
| 49 | Reconditioning of Tool Joints |
| 50 | Repair of all Damaged Guards (1 Lot) |
| 51 | Repair of Power Cable bracket |
| 52 | ABB Drive - 5 yearly service and health check |
| 53 | ABB Drive - 10 yearly service and full refurbishment |
| 54 | Repair of Link Tilt Assembly. |
| 55 | Repair of Upper IBOP yoke |
| 56 | Repair of RLA stop plate |
| 57 | Repair of IBOP shell Actuator |
| 58 | Repair of Shop Pin body. |
| 59 | Repair of End Cap assembly Pipe Handler. |
| 60 | Repair of Hydraulic Tank and Junction Box |
| 61 | Repair of Jaw Assembly Note :- Machining charges will be finalized after dismantling and joint inspection |
| 62 | SEALANT,PIPE*SCD* |
| 63 | GREASE,EXTREME SERVICE, 14 0Z. |
| 64 | GREASE,BRG,MTR (14 OZ TUBES), C/W MSDS |
| 65 | (MT)GASKET,COVER,ACCESS |
| 66 | (MT)OIL SEAL(VITON),STD.BORE,TDS |
| 67 | SealBackup RingType B PolypakFluorocarbon FKMSeal |
| 68 | (MT)O-RING,.275x50.5 |
| 69 | O-RING |
| 70 | O-RING |
| 71 | O-RING |
| 72 | (MT)CLAMP,SNGL,1/4\\"TUBE,PHM3I |
| 73 | (MT)BELT,TIMING |
| 74 | Seal, ProprietaryGLYD RING ROTARYTop DrivesTDS-11S |
| 75 | Seal, ProprietaryGLYD RING ROTARYTop DrivesTDS-11S |
| 76 | RING,GLYD,10.0 DIA-ROD |
| 77 | SEAL,LIP 8.25X9.5X.62 |
| 78 | Rotating Link AdapterWIPER SEAL, 11.000 ROD500 Ton |
| 79 | CAP, PLASTIC SAE-08 |
| 80 | SLEEVE,OVAL,COMPRESSION,1/8\\"TDS(1 EA=1 PK) SOH/TXT |
| 81 | PLUG,PLASTIC |
| 82 | PLUG, PLASTIC PIPE CLOSURE |
| 83 | PLUG, PLASTIC PIPE CLOSURE |
| 84 | BLADDER,RESERVOIR TDS9S 5 gallon |
| 85 | SEAL, PROPRIETARY;SEAL, ROD;TOP DRIVES |
| 86 | SEAL, PISTON |
| 87 | O-RING 1.984\\" ID, .139\\" W |
| 88 | PLATE,COVER,PLS3 (ALUMINUM) |
| 89 | SEAL, DRIVE END |
| 90 | RTV,162 WHITE 10.3 OZ, C/W MSDS |
| 91 | WASHER, LOCK STAR 3/8\\" ID |
| 92 | WASHER, LOCK STAR 1/2\\" BRASS |
| 93 | BREATHER,DRAIN,(EEX E II) |
| 94 | TDS LOCKNUT 50 MM |
| 95 | TDS LOCKNUT 20 MM |
| 96 | Cable Gland AccessorySealing WasherM25 x 1.5Matl N |
| 97 | TDS NYLON WASHER 32MM |
| 98 | M50 x 1.5,WASHER, NYLON SEALING GLAND |
| 99 | TDS NYLON WASHER 20MM |
| 100 | PLUG, 20MM |
| 101 | FRICTION PAD (REPLACEMENT) |
| 102 | HOSE ASSEMBLY, SAE HYDRAULIC; -4; 100R16; L |
| 103 | HOSE ASSY |
| 104 | CLAMP,DBL,3/8\\"TUBE,PHM3I |
| 105 | CLAMP,DBL,1/2\\"TUBE,PHM3I |
| 106 | HOSE ASSEMBLY, SAE HYDRAULIC;-8;100R16;L |
| 107 | HOSE ASSEMBLY |
| 108 | HOSE ASSEMBLY |
| 109 | HOSE ASSY |
| 110 | HOSE,ASSY |
| 111 | HOSE ASSY |
| 112 | HOSE ASSY |
| 113 | HOSE ASSY |
| 114 | HOSE ASSY |
| 115 | HOSE ASSY |
| 116 | HOSE ASSY |
| 117 | SEAL,PISTON |
| 118 | SEAL ROD |
| 119 | WIPER, ROD |
| 120 | FLANGE, PROTECTOR |
| 121 | PLUG, PLASTIC PIPE CLOSURE |
| 122 | HOSE ASSEMBLY |
| 123 | HOSE ASSEMBLY |
| 124 | HOSE ASSEMBLY |
| 125 | COMPOUND, ADHESIVE 10CC |
| 126 | COMPOUND, LOCKING-10CC |
| 127 | PUTTY, INSULATING |
| 128 | TAPE,ELECT,BLACK,PHM1 |
| 129 | COMPOUND,POTTING,3M(2130) |
| 130 | TDS WIRE FERRULE BLUE |
| 131 | Wire, MechanicalDia 0.051 inMatl LockwireL 143FTCA |
| 132 | Wire Rope Accessory;Wire Lock;Dia 0.047 in |
| 133 | WIRE,LOCK,.032DIA (UK 360FT, US 364FT PER CAN) |
| 134 | DUST COVER;DUST CAP;0.125\\" |
| 135 | FERRULE, CABLE .136 x .219 |
| 136 | SLEEVE,NYLON |
| 137 | PERMA-LOK |
| 138 | COMPOUND, LOCKING-10CC - |
| 139 | SLEEVE, MAINSHAFT, TDS11 |
| 140 | (MT)SLEEVE,FLANGED,7.87ID,300SS |
| 141 | (MT)SLEEVE,STEM,STD.BORE,TDS |
| 142 | (MT)BEARING,ROLLER,SPHERICAL,80X170 |
| 143 | (MT)BEARING,ROLLER,TAPER,200X310MM |
| 144 | BEARING,THRUST,500 TON TDS-11SH |
| 145 | (MT)BEARING,ROLLER,CYLINDRICAL,200X360MM |
| 146 | (MT)BEARING,ROLLER,CYLINDRICAL,75X160MM |
| 147 | (MT)RETAINER,BEARING,.34X17.0DIA |
| 148 | PDM4 BALL VALVE 3/4-14 BRASS |
| 149 | (MT)NOZZLE,SPRAY,.86GPM |
| 150 | (MT)NOZZLE,SPRAY,1.3GPM |
| 151 | (MT)TUBE,BEARING,LUBE,A36 |
| 152 | (MT)TDS9S SHIM,BRG RETAIN.002 |
| 153 | (MT)TDS9S SHIM,BRG RETAIN.005 |
| 154 | (MT)TDS9S SHIM,BRG RETAIN.003 |
| 155 | (MT)TDS9S SHIM,BRG RETAIN.010 |
| 156 | (MT)TDS9S SHIM,BRG RETAIN.031 |
| 157 | SHIM,RESERVOIR,.002 TDS9S |
| 158 | SHIM,RESERVOIR,.005 |
| 159 | SHIM,RESERVOIR,.010 TDS9S |
| 160 | SHIM,RESERVOIR,.031 TDS9S |
| 161 | Plug, Common PipeCountersunk Head0.063-27 MNPTBody |
| 162 | ISOLATOR,UPPER BEARING |
| 163 | PLUG, PIPE-SQ HD |
| 164 | (MT)TUBE,ASSY,BRAKE |
| 165 | (MT)TUBE,BRAKE,ASSY,TDS9S |
| 166 | BRACKET,HEAT-EXCHANGER |
| 167 | KIT, HEAT EXCHANGER, TDS-11SA |
| 168 | (MT)TUBE,HEAT-EXCHANGER,ASSY,TDS9 |
| 169 | (MT)TUBE,HEAT-EXCHANGER,ASSY,TDS9 |
| 170 | TUBE,ASSY,BRAKE |
| 171 | (MT)RING,RETAINING |
| 172 | (MT)RING,RETAIN,INT,PHM3I,(TDS9S) |
| 173 | LINER,STEM,UPPER (SEE TEXT NOTE) |
| 174 | SHIELD, BEARING,SMALL BORE, TDS 4S |
| 175 | RING,SPACER |
| 176 | (MT)PIN,DOWEL,1.25DIAX3.8,MS27 |
| 177 | TUBE ASSY,BRAKE, BOTTOM |
| 178 | TUBE ASSY,BRAKE, TOP |
| 179 | (MT)TUBE,BREATHER,ASSY,TDS9S |
| 180 | (MT)TUBE,BREATHER,ASSY,TDS9S |
| 181 | PIN,DOWEL |
| 182 | NIPPLE, CLOSE |
| 183 | ELBOW, 90DEG COMMON |
| 184 | PLUG,ORIFICE,.071,PHM3I |
| 185 | PLUG,ORIFICE .047,PHM |
| 186 | PLUG, ORIFICE, .250NPT (.205) |
| 187 | PLUG, EXT PIPE-CTSK HEX |
| 188 | PLUG, EXT PIPE-CTSK HEX |
| 189 | PLUG, EXT PIPE-CTSK HEX |
| 190 | PLUG, EXTERNAL PIPE |
| 191 | PLUG, EXT PIPE-CTSK HEX |
| 192 | PLUG,PIPE,EXT,CTSK,HEX |
| 193 | PLUG, PIPE-SQ HD |
| 194 | PLUG, SQ HD MAGNETIC |
| 195 | PLUG, O-RING BOSS |
| 196 | PLUG, O-RING BOSS |
| 197 | (MT)PLUG,MODIFIED, 3\\"NPT,W/.38NPT HOLE |
| 198 | CONN, O-RING BOSS/37 |
| 199 | CONNECTOR,O-RING BOSS/37 |
| 200 | Adapter, 2 PortConnectorMale SAE O-Ring Boss -8Mal |
| 201 | TEE, SWIVEL INT 37/37/37 |
| 202 | ELBOW, 90DEG EXT PIPE/37 |
| 203 | BUSHING, PIPE RDCING-COMM |
| 204 | SCREW, CAP-HEX HD DRILLED |
| 205 | SCREW, CAP-HEX HD DRILLED, PHMD-1 |
| 206 | SCREW, CAP-HEX HD DRILLED |
| 207 | SCREW, CAP-HEX HD DRILLED |
| 208 | SCREW, CAP-HEX HD DRILLED |
| 209 | SCREW, CAP-HEX HD DRILLED |
| 210 | SCREW, CAP-HEX HD DRILLED |
| 211 | SCREW, CAP-HEX HD DRILLED |
| 212 | SCREW, CAP-HEX HD DRILLED |
| 213 | (MT)LOCKNUT, BEARING |
| 214 | (MT)LOCKWASHER, BEARING |
| 215 | (MT)WASHER,300SS |
| 216 | WASHER, LOCK-REGULAR |
| 217 | WASHER, LOCK-REGULAR |
| 218 | Washer;Lock, Helical Spring;Nom Sz 0.625 in;Matl S |
| 219 | WASHER, LOCK-REGULAR |
| 220 | WASHER, LOCK-REGULAR |
| 221 | SCREW, CAP-HEX HD DRILLED |
| 222 | SCREW, CAP-HEX HD DRILLED |
| 223 | SCREW, CAP-HEX HD DRILLED |
| 224 | SCREW, CAP-HEX HD DRILLED |
| 225 | SCREW, CAP-HEX HD DRILLED |
| 226 | SCREW, CAP-HEX HD DRILLED |
| 227 | SCREW, CAP-HEX HD DRILLED |
| 228 | TEE, 37/37 SWIVEL INT 37 |
| 229 | ELBOW, 90DEG EXT/37 |
| 230 | SCREW, CAP-HEX HD DRILLED |
| 231 | WASHER, FLAT .063 THICK. |
| 232 | SCREW, CAP-HEX HD (UNC) |
| 233 | SCREW,CAP-HEX HEAD |
| 234 | PIN, COTTER |
| 235 | ELBOW, 45DEG EXT PIPE/37 |
| 236 | ELBOW, 90 SWIVEL 37FEM JIC |
| 237 | WASHER, LOCK-REGULAR 1/4\\" |
| 238 | ELBOW, O-RING BOSS/37DEG |
| 239 | SCREW, CAP-HEX HD DRILLED |
| 240 | SCREW, CAP-HEX HD |
| 241 | SHACKLE, ANCHOR |
| 242 | NUT, HEX-SLTD (UNC-2B) |
| 243 | WASHER, LOCK, REGULAR |
| 244 | SCREW, CAP-HEX HD (UNC-2A) |
| 245 | SCREW, CAP-HEX HD DR |
| 246 | SCREW, CAP-HEX HD DRILLED |
| 247 | SCREW, CAP-HEX HD DRILLED |
| 248 | NUT, HEX-SELF LOCKING |
| 249 | FITTING, GREASE |
| 250 | SCREW, CAP-HEX HD DRILLED |
| 251 | WASHER, LOCK-REGULAR SS |
| 252 | CLAMP,SUPPORT,2.25ID |
| 253 | SCREW, CAP-HEX HD DRILLED |
| 254 | (MT) TUBE,BRAKE,ASSY,TDS9S |
| 255 | ASSY,ENCODER,DIGITAL |
| 256 | (MT)PLATE,MOUNT,ADAPTER,MS17 |
| 257 | (MT)SHAFT,ADAPTER |
| 258 | (MT)PLATE,MOUNT,ENCODER,316SS |
| 259 | (MT)PLATE,MOUNT,SLED,316SS |
| 260 | (MT)PULLEY,ADAPTER |
| 261 | (MT)PULLEY,ENCODER |
| 262 | SPRING,COMPRESSION,.3DIAx1.5 |
| 263 | WASHER, LOCK-REGULAR, # 10 |
| 264 | FLAT WASHER 1/4 (.281 X .50 X .063) S/S |
| 265 | SCREW, CAP,SOC-HD,(UNC) |
| 266 | SCREW, CAP-HEX HD DR |
| 267 | SCREW,CAP,SOCKET-HEAD |
| 268 | COLLAR, LANDING (2 HALVES =QTY 1) |
| 269 | PIN, DOWEL (PSDS) |
| 270 | RING,THRUST,.125X7.75X10.0 |
| 271 | PISTON RING |
| 272 | SCREW,CAP-HEX-HEAD,1.25X6.5 |
| 273 | NUT, HEX-SLTD, (PSDS) |
| 274 | PIN, COTTER |
| 275 | RING,RETAINER,EXTERNAL |
| 276 | BUSHING,SLEEVE,SPLIT,1.25X10.0DIA |
| 277 | Fitting, Grease;Airline Hydraulic;Straight;Dia .12 |
| 278 | BUSHING,SLEEVE,1.0X1.25 |
| 279 | BEARING,SINTERED,BRONZE,FLANGED |
| 280 | PLUG, PIPE-SQ HD |
| 281 | RETAINER,SEAL,OIL,A514 |
| 282 | SHAFT,PIVOT LOCK STUD,,1.0-8NCx4.0, MS27 |
| 283 | PIN,SPIROL |
| 284 | BEARING,SINTERED BRONZE,FLANGED |
| 285 | SCREW, CAP-HEX HD DRILLED, TDS |
| 286 | Nut;Hex, Jam;1.250-7 UNC-2B;Matl Grade 2 Steel;Zin |
| 287 | NUT, HEX-SLTD (UNCB-2B) |
| 288 | PIN, COTTER |
| 289 | CONN, O-RING BOSS/37 |
| 290 | CONN, O-RING BOSS/37 |
| 291 | ELBOW, O-RING BOSS/37DEG |
| 292 | Fitting GreaseFlushStraightDia 0125 inPTFL 05 inSh |
| 293 | WIRE-ROPE,.125 - SELL AS 2 FT MINIMUM |
| 294 | MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE |
| 295 | TDS9S HOUSING,GEAR |
| 296 | GEAR, SET; TDS9S **SEE TEXT NOTES ** |
| 297 | TDS9S BEARING,ROLLER |
| 298 | TDS9S COVER,END |
| 299 | TDS9S PLATE,THRUST |
| 300 | PDM HPU SIGHT GAUGE |
| 301 | ADAPTER, PROPRIETARY;SPLINE;TOP DRIVES |
| 302 | ELBOW, O-RING BOSS/37DEG |
| 303 | PLUG, EXT PIPE-CTSK HEX |
| 304 | SCREW, CAP-HEX HD DRILLED |
| 305 | ELBOW, 90DEG EXT PIPE/37 |
| 306 | ELBOW, 90DEG EXT/37 |
| 307 | VALVE,RELIEF,.750NPT. |
| 308 | PLUG, EXT PIPE-CTSK HEX |
| 309 | BREATHER,RESERVOIR |
| 310 | PDM HPU STRAINER,SUMP 1.0 |
| 311 | WASHER, LOCK-REGULAR SS |
| 312 | SCREW, CAP-HEX HD (UNC-2A) |
| 313 | SCREW, CAP-HEX HD (UNC-2A) |
| 314 | SLEEVE, SHOT PIN |
| 315 | BEARING,RADIAL,LIGHT |
| 316 | RETAINER,BEARING,PH-100 |
| 317 | HYD MOTOR,MODIFIED LOW SPEED HIGH TORQUE |
| 318 | RETAINER,PIN,PH-100 |
| 319 | SHAFT,COMPOUND GEAR, PH-100 |
| 320 | FLANGE BUSHING,SHOT PIN,PH-100 |
| 321 | PIN, SHOT |
| 322 | SCREW, CAP-HEX HD DRILLED |
| 323 | SCREW, CAP-HEX HD DRILLED |
| 324 | PLUG, HYDRAULIC; STANDARD; MALE SAE O-RING BOSS |
| 325 | ELBOW, O-RING BOSS/37DEG |
| 326 | CONN, O-RINB BOSS/37 |
| 327 | CAP, FEM 37DEG SEAT |
| 328 | CARTRIDGE,VALVE,RELIEF TDS9S |
| 329 | SCREW, CAP-HEX HD DRILLED |
| 330 | FITTING,SAE-4 |
| 331 | RING, RETAINING - INTERNAL |
| 332 | GEAR,COMPOUND 40 X 25 (MACHINED) |
| 333 | GEAR,PINION,SHOT PIN,PH-100 |
| 334 | PLUG, O-RING .437-20 THD |
| 335 | PLUG, O-RING .437-20 THD |
| 336 | PLUG, O-RING .562-18 THD |
| 337 | ORIFICE PLUG |
| 338 | CARTRIDGE,VALVE,RELIEF,PHM3I |
| 339 | FITTING,SAE-6 |
| 340 | CONN, O-RING BOSS/37 |
| 341 | SCREW, CAP-SOC HD (UNC) |
| 342 | PIN,DOWEL |
| 343 | SCREW, CAP-HEX HD DRILLED |
| 344 | COVER,MOTOR,LOUVERED |
| 345 | SCREEN,8.3X12.1,AISI316 |
| 346 | PLUG, PIPE-SQ HD |
| 347 | PINION GEAR INSTALLATION SUPPLIES |
| 348 | ALEM FITTING |
| 349 | BLOCK,PWR TERM |
| 350 | Bearing, ProprietaryDE BEARINGTop DrivesTDS-11NU22 |
| 351 | WASHER |
| 352 | SCREW,MACH-PAN HD |
| 353 | RELEASE TUBE |
| 354 | BEARING,AC-MOTOR,NONDRIVE-END TDS9S |
| 355 | HEATER ACCESSORY;HEATER ELEMENT;COIL TYP |
| 356 | RETAINER, RING |
| 357 | RETAIN-RING, TDS9S |
| 358 | BLOCK,ADAPTER |
| 359 | CAPE, INNER DE |
| 360 | SPACER,BEARING,MOTOR TDS9S |
| 361 | (MT)CABLE,SHPBD MLTCR IEC92-3 |
| 362 | (MT)CABLE,ARMORED,MULTI CONDUCTOR |
| 363 | NUT, HEX-SELF LOCKING TDS |
| 364 | SCREW, CAP-HEX HD (UNC-2A) |
| 365 | SCREW,CAP-BUTTON-HEAD |
| 366 | NUT, HEX-STD (UNC-2B) BRASS |
| 367 | WASHER, FLAT |
| 368 | WASHER, FLAT |
| 369 | TERM,WIRE-RING 12-10 1/4\\" |
| 370 | LUG, COPPER CONNECTOR |
| 371 | GLAND, 1/2\\" NPT, ARMORED, POTD |
| 372 | GLAND, 3/4\\" NPT, ARMORED, POTD |
| 373 | PHM3I SW,PRESS UL/CSA |
| 374 | TDS-3 SWITCH, EEX PRESSURE RANGE, C/W ATEX CERT |
| 375 | TDS9S RECEPT, POWER BLACK |
| 376 | TDS9S RECEPT, POWER RED |
| 377 | TDS9S RECEPT, POWER WHITE |
| 378 | STUD,EARTHING |
| 379 | CABLE,INSULATED,1-CONDUCTOR |
| 380 | SCREW, CAP-HEX HD DRILLED |
| 381 | SCREW, CAP-HEX HD (UNC-2A) |
| 382 | SCREW, CAP-HEX HD DR |
| 383 | SCREW, CAP-HEX HD DRILLED |
| 384 | SWITCH, 30\\" Hg-20 PSI (EExd) |
| 385 | KIT, SPLIT FLANGE 3000PSI |
| 386 | ELBOW,45 DEG.INT.ELCTRCL |
| 387 | SPLICE NUT, CRIMP RB44 |
| 388 | NUT,HEX-SLFLKG (UNF) |
| 389 | WASHER, LOCK-REGULAR SS |
| 390 | TERM, WIRE-RING 16-14 #10 |
| 391 | BUSHING, REDUCER 1 - 3/4 |
| 392 | HP45 ELBOW E/P 1/2\\" NPT |
| 393 | FITTING, GREASE |
| 394 | NIPPLE, CLOSE |
| 395 | SCREW, CAP HEX HD DRILLED, TDS |
| 396 | SCREW, CAP-HEX, (UNF) |
| 397 | NUT, HEX-SELF LOCKING*SOH=0. Use: 10490004-017* |
| 398 | SCREW, CAP-HEX HD (UNC) |
| 399 | SCREW, DRIVE-TYPE U, SS, SOH/TXT |
| 400 | BUSHING, REDUCER 3/4\\" - 1/2 |
| 401 | SCREW, CAP-HEX HD DRILLED |
| 402 | SCREW, CAP-HEX HD DRILLED |
| 403 | CABLE,SHPBD T/SPR IEC92-3 |
| 404 | SOLENOID,VALVE,3-POS 24 VDC |
| 405 | SOLENOID VALVE, D03, UL |
| 406 | VALVE W/REWORKED HANDLE, DIRECTIONAL CONTROL |
| 407 | PLUG, CAVITY |
| 408 | CARTRIDGE,VALVE,PRESSURE RELIEF TDS9S |
| 409 | CARTRIDGE,LOGIC,PHM3I |
| 410 | CARTRIDGE,CHECK,PHM3I |
| 411 | TDS9S VALVE CART,CHECK |
| 412 | TDS9S VALVE CART,CHECK |
| 413 | VALVE,CONTROL,FLOW |
| 414 | TDS9S REDUCING VALVE CART,RED/REL |
| 415 | PDM VALVE CART,DIFF UNLDG |
| 416 | TDS9S VALVE CART,CHECK |
| 417 | BALANCED POPPET VENTABLE RELIEF VALVE |
| 418 | PLUG,CAVITY,TDS9S |
| 419 | TDS9S VALVE CART,RED/REL |
| 420 | CARTRIDGE, VALVE, RELIEF, TDS9S |
| 421 | PLUG, ORIFICE |
| 422 | ORIFICE PLUG, #10-32X.055 |
| 423 | PLUG,ORIFICE,.250 NPT(.071)(PRS8) |
| 424 | PLUG, O-RING .750-16 THD |
| 425 | PLUG, O-RING SRT THD REC HEX |
| 426 | PLUG, EXTERNAL PIPE |
| 427 | PLUG, EXT PIPE-CTSK HEX |
| 428 | PLUG, EXT PIPE-CTSK HEX |
| 429 | CAP, FEM 37DEG SEAT |
| 430 | CAP, FEM 37DEG SEAT |
| 431 | SCREW, CAP-SOC HD PH **SEE TEXT*** |
| 432 | TDS-9S VALVE CVR SERIES 1 |
| 433 | CONN, O-RING BOSS/37 |
| 434 | ELBOW, O RING BOSS/37 |
| 435 | ELBOW, O-RING BOSS/37DEG |
| 436 | ELBOW, O-RING BOSS /37DEG |
| 437 | ELBOW, O-RING BOSS/37DEG |
| 438 | ELBOW, O-RING BOSS/37DEG |
| 439 | FLOW CONTROL |
| 440 | CAP, FEM 37DEG SEAT |
| 441 | ORIFICE,PLUG,1.8MM |
| 442 | ELBOW, 90/SWIVEL INT 37/37 |
| 443 | SCREW, CAP-SOC HD |
| 444 | IDS3 CARTRIDGE,PRV |
| 445 | ADAPTER, 2 PORT;ELBOW,90°;SAE CODE 61 FLANGE -8;MA |
| 446 | FLANGE CLAMP, SAE HYDRAULIC; CODE 61; SPLIT O-RING |
| 447 | CONN, EXT PIPE/37DEG |
| 448 | CONN, EXT PIPE/37DEG |
| 449 | WASHER, LOCK HI-COLLAR |
| 450 | TDS9S PUMP,HYDRAULIC VANE |
| 451 | COUPLING,PUMP,HYD,.750BOREX1.375BORE |
| 452 | SCREW,CAP-HEX,METRIC |
| 453 | WASHER, LOCK-HEAVY |
| 454 | WASHER, LOCK |
| 455 | WASHER, FLAT |
| 456 | SCREW, CAP HEX HEAD (UNC) |
| 457 | PUMP,VARIABLE DISPLACEMENT |
| 458 | ASSEMBLY,TERMINAL |
| 459 | ASSEMBLY,TERMINAL |
| 460 | SCREW, CAP-FLT HD (UNC) |
| 461 | SCREW, CAP;HEX HEAD;ISO 4017 (DIN 933);M5X0.8 *;L |
| 462 | ASSEMBLY,TERMINAL |
| 463 | INT/STAR LOKWASH 25MM SS |
| 464 | INT/STAR LOKWASH 20MM STAINLESS STEEL |
| 465 | INT/STAR LOCKWASH 32MM SS |
| 466 | TDS LOCKNUT 25 MM |
| 467 | TDS LOCKNUT 32 MM |
| 468 | WASHER, FLAT (AN960-C10L) |
| 469 | NUT,FIXING*SCD* |
| 470 | SCREW,CAP,FLAT-HEAD |
| 471 | SCREW,MACH-PAN HD 10-32 |
| 472 | SCREW, CAP-HEX HD |
| 473 | GLAND,M20x1.5,EX,ARMORED-CABLE,NON-POTD |
| 474 | GLAND,M20x1.5,EX,ARMORED-CABLE,NON-POTD |
| 475 | GLAND,M25X1.5,EX,ARMORED-CABLE,NON-POTD |
| 476 | GLAND,M32x1.5,EX,ARMORED-CABLE,NON-POTD |
| 477 | GLAND,M50X1.5,NON-ARMR-CABLE,NON-POTD |
| 478 | WASHER, LOCKING STAR |
| 479 | CABLE, SHPBD MLTCR IEC92-3, |
| 480 | Cable, Composite;Shipboard-Multicore;3 Conductor; |
| 481 | PIGTAIL ASSEMBLY-18 COND, 19 PIN CONN |
| 482 | PIGTAIL,ASSY,42-CONDUCTOR |
| 483 | CONNECTOR,WRAP AROUND,FOR SHIELDED CABLE |
| 484 | SPRING,BRAKE,DISK,TDS9 |
| 485 | SCREW,RETURN,SPRING |
| 486 | PIN,GUIDE |
| 487 | BLEEDER VALVE |
| 488 | TUBE,ASSY,CASE-DRAIN |
| 489 | FLANGE CLAMP, SAE HYDRAULIC; CODE 61; SPLIT FLAT |
| 490 | KIT, SPLIT FLANGE |
| 491 | REDUCER, O-RING BOSS |
| 492 | KIT,TUBE ASSEMBLY |
| 493 | CONN, O-RING BOSS/37 |
| 494 | ADAPTER,PUMP,INLET/DRAIN |
| 495 | Adapter, 2 PortElbow,90 BulkheadMale SAEJIC 37 -6M |
| 496 | TEE, BULKHEAD UNION 37DEG |
| 497 | CONN, O-RING BOSS/INT P |
| 498 | VALVED NIPPLE, QUICK DISC,. |
| 499 | ELBOW, 90DEG-EXT PIPE |
| 500 | REDUCER, O RING |
| 501 | REDUCER, O-RING BOSS |
| 502 | ELBOW, O-RING BOSS/37DEG |
| 503 | TEE, 37/37/O-RING |
| 504 | 90 Degrees Male Elbow 1 MP-1 JIC*** SEE TEXT*** |
| 505 | ELBOW, 90DEG EXT/37 |
| 506 | ADAPTER, EXT PIPE/37DEG |
| 507 | TEE, INT-EXT PIPE 37 |
| 508 | SCREW, CAP-HEX HD (UNC) |
| 509 | TEE,37/37/INT PIPE |
| 510 | ELBOW |
| 511 | REDUCER, PIPE-EXT/INT |
| 512 | REDUCER, TUBE END |
| 513 | ELBOW, O-RING BOSS/37DEG |
| 514 | TEE, 37/37/O-RING BOSS |
| 515 | TEE,PIPE EXT/INT/INT |
| 516 | REDUCER, PIPE-EXT/INT |
| 517 | ELBOW, 45DEG EXT PIPE/37 |
| 518 | LOCKNUT, BULKHEAD |
| 519 | VALVE,GAS FILL |
| 520 | TDS9S ACCUM,HYDRO-PNEU 2\\" |
| 521 | Adapter, 2 PortConnectorMale SAE O-Ring Boss -12Ma |
| 522 | ELBOW, O-RING BOSS/37DEG |
| 523 | VALVE,LOGIC,NORMALLY OPEN |
| 524 | SEQUENCE VALVE CARTRIDGE |
| 525 | TDS9S VALVE CART,FLOW CTL |
| 526 | KIT, FILTER,GEAR-OIL |
| 527 | BYPASS, 75 PSI, FILTER ASSY |
| 528 | DIRT ALARM |
| 529 | MAGNETIC SUCTION SEPARATOR ASSY |
| 530 | ELEMENT,FILTER,HYD |
| 531 | PIN,SPIROL |
| 532 | WASHER, GR L9 1\\" |
| 533 | BUSHING,FLANGED,2.75X1.5,BRZ |
| 534 | PIN,PIVOT,BOGEY |
| 535 | ROLLER,BOGIE |
| 536 | CHOCK,CARRIAGE,TDS9 |
| 537 | PLATE,CHOCK,LINK,TDS11 |
| 538 | BAR, CHOCK, BUSHING TDS11 |
| 539 | CAM FOLLOWER 6\\" |
| 540 | Pin, Connecting/Coupling;Linch;Dia 0.188 in;L 1.56 |
| 541 | BEARING, CAM FOLLOWER |
| 542 | SCREW,SOCKET HEAD SHOULDER MOD |
| 543 | NUT, HEX-SLTD, (UNC-2B) |
| 544 | WASHER, FLAT |
| 545 | WASHER, LOCK-HEAVY |
| 546 | WASHER, LOCK-HI COLLAR |
| 547 | PIN, COTTER |
| 548 | NUT, HEX-JAM (UNF-2B) |
| 549 | NutHex, Jam2.000-12 UN-2BMatl Grade 5 SteelPlainAS |
| 550 | CABLE, NYLON COATED |
| 551 | SCREW, CAP-HEX HD DRILLED |
| 552 | PIN,CRANK |
| 553 | COLLAPSABLE LINK 2 |
| 554 | PIN,2.0DIAX7.5,MS15 |
| 555 | SHACKLE, ANCHOR,PRS3I |
| 556 | CRANK,ASSY,EXTERNAL |
| 557 | WASHER, LOCK, TAB, .56 DIA |
| 558 | KEY, .50 SQUARE x 2.8, 1018 STL |
| 559 | WASHER, LOCK-HI COLLAR |
| 560 | COLLAPSABLE LINK 1 |
| 561 | PIN,RETAINER,COLLAPSIBLE LINK |
| 562 | WASHER, FLAT |
| 563 | Tube AssemblyLink Adapter - ManifoldTop DrivesTDS- |
| 564 | NUT, HEX-HEAVY (UNC-2B) |
| 565 | WASHER, LOCK-HEAVY |
| 566 | PIN, COTTER 5/32 X 2 1/2 |
| 567 | TUBE ASSY,LINK ADAPTER/MANIFOLD |
| 568 | TUBE ASSY, LINK ADAPTER/ MANIFOLD |
| 569 | NUT, HEX-SLTD, (UNC-2B) |
| 570 | ROPE,WIRE (.25 DIA X 9') |
| 571 | CLAMP,LINK |
| 572 | U-BOLT,.75DIA,MS21 |
| 573 | SAVER SUB,N.SEA, C/W CERT |
| 574 | SCREW,CAP-SOCKET HEAD (UNC-2A) |
| 575 | PIN, COTTER |
| 576 | WASHER, FLAT |
| 577 | SCREW, CAP-HEX HD DRILLED |
| 578 | SHACKLE,ANCHOR |
| 579 | LOCKNUT, HEAVY HEX PLATE (PACK OF 10) |
| 580 | EYEBOLT, SHOULDERED |
| 581 | Wire Rope Assembly;Dia .188 in;7x19;Eye;Eye;Top Dr |
| 582 | BUSHING,SLEEVE,1.00X1.50,FIBERGLIDE |
| 583 | SPRING,COMPRESSION |
| 584 | CAM FOLLOWER |
| 585 | WASHER, FLAT |
| 586 | PIN, ACTUATOR LINK |
| 587 | ACTUATOR LINK PIN |
| 588 | ACTUATOR LINK PIN |
| 589 | PIN, COTTER |
| 590 | ACTUATOR LINK WASHER |
| 591 | BUSHING,SLEEVE,0.75x1.00,FIBERGLIDE |
| 592 | BUSHING,SLEEVE,1.38X1.88,FIBERGLIDE |
| 593 | BUSHING,SLEEVE,1.00x1.00,FIBERGLIDE |
| 594 | SLEEVE,SPRING,TDS9 |
| 595 | PIN, COTTER |
| 596 | WASHER, FLAT |
| 597 | NUT, HEX-JAM |
| 598 | WASHER, LOCK-HEAVY |
| 599 | WASHER, LOCK REGULAR |
| 600 | NUT, HEX, TDS-3 |
| 601 | HEX JAM NUT, 7/8 |
| 602 | ROD, PROPRIETARY;THREADED ROD, PH-55 RETENTION;TOP |
| 603 | SPACER;ALIGNMENT SPACER, PH-55 RETENTION |
| 604 | PIN, COTTER |
| 605 | DOWEL PIN |
| 606 | BUSHING |
| 607 | SCREW, CAP-HEX HD DRILLED |
| 608 | WASHER, FLAT |
| 609 | SCREW,CAP-HEX-HEAD,1.0-8X6.0 |
| 610 | RETAINER,PIN,HINGE,1.25X5.0X.5,A36 |
| 611 | Ring, SplitID .93 inMatl 316 StainlessClose OvalOD |
| 612 | SPRING,COMPRESSION,1.0x2.0x3.0 |
| 613 | BUSHING,FLANGED,4.0X4.3X1.85 |
| 614 | PIN,CLEVIS |
| 615 | PIN, CLEVIS |
| 616 | RING,HEAD,CYLINDER |
| 617 | SCREW, CAP-HEX HD DRILLED |
| 618 | PIN,HINGE |
| 619 | PIN, COTTER |
| 620 | SCREW, CAP-HEX HD (UNC) |
| 621 | MANIFOLD,CLAMP,ALUM,TDS9S |
| 622 | PLUG,CAVITY,PHM3I |
| 623 | ELBOW, 45 O-RING BOSS/37* SUP/TXT |
| 624 | CARTRIDGE,VALVE,CHECK TDS9S |
| 625 | TUBE,ASSY |
| 626 | PIN,CYLINDER MOUNTING, PH-50 |
| 627 | PIN, COTTER TDS-S |
| 628 | MANIFOLD,LINK-TILT,TDS9S |
| 629 | CARTRIDGE,VALVE,CHECK,PO TDS9S |
| 630 | ORIFICE,PLUG,.125NPT,.142\\"DIA |
| 631 | ASSY,LWR IBOP,65/8X65/8W/REL GRV-STD, C/W CERT |
| 632 | UPPER IBOP, PH50 ASSY, 6-5/8 X 6-5/8, C/W CERT |
| 633 | PIN,GUIDE ARM |
| 634 | PLATE,PIN,RETAINER |
| 635 | ARM,GUIDE, MODIFIED |
| 636 | COMPRESSION SPRING 1.95 |
| 637 | PLATE,RETAINER,SPRING,A36 |
| 638 | SCREW, CAP-HEX HD DRILLED |
| 639 | RETAINER,DIE |
| 640 | TDS-3 BOLT RETAINER 6.9 |
| 641 | LINK,PEAR (P) |
| 642 | COTTER PIN |
| 643 | CARTRIDGE,VALVE,PHM3I |
| 644 | COUNTER BALANCE PIN |
| 645 | CLEVIS PIN, COUNTERBALANCE |
| 646 | TUBE,ASSY,COUNTER BALANCE |
| 647 | PLUG, O-RING 1.062-12 THD |
| 648 | PIN, COTTER |
| 649 | KIT,FLANGE,BLANK *SCD* |
| 650 | MODIFIED,SCREW CAP HEX HEAD |
| 651 | SCREW, CAP-HEX HD DRILLED |
| 652 | WASHER, FLAT |
| 653 | ASSY,WASH-PIPE,3\\"BORE, 7500 PSI |
| 654 | PIN,BAIL,4.25DIAX10.15,MS00009 |
| 655 | BUSHING SLEEVE 4.25 ID X 5.25 BRZ |
| 656 | BUTTON CNTRBLNCE BRKT; RING,SPACER 78X1 |
| 657 | KEY,PIN,BAIL |
| 658 | SCREW, CAP-HEX HD DRILLED SUP |
| 659 | NUT, HEX-STD (UNC-2B) |
| 660 | U-BOLT,1.0DIA,MS15 |
| 661 | BRACKET, SKID,TDS9 (WLDMT) |
| 662 | BUSHING, PROPRIETARY;STANDARD;TOP DRIVES;PH-75 |
| 663 | BUSHING, PROPRIETARY;STANDARD;TOP DRIVES |
| 664 | PIN,JOINT,2.0DIAX12.5,MS28 |
| 665 | PIN, RETAINER, .5 DIA X 7.0 |
| 666 | SLING,ROPE,WIRE,25 TON |
| 667 | BUSHING |
| 668 | BUSHING |
| 669 | PIN, ROLL |
| 670 | BUSHING |
| 671 | BUSHING |
| 672 | BUSHING |
| 673 | BOLT, DRILLED |
| 674 | SHACKLE,ANCHOR,25 TON |
| 675 | NUT, HEX, 1-1/2 (6) CARBON STEEL SLOTTED FINISH Zn |
| 676 | NUT, HEX-HEAVY 1\\"-8 (UNC-2B) |
| 677 | ROD,THREADED,HIGH-TENSILE,1-8 UNC-2A |
| 678 | SCREW,CAP,HEX-HD,DRILLED |
| 679 | WASHER, PROPRIETARY;TAB LOCK;TOP DRIVES; |
| 680 | ROD,THREADED |
| 681 | SCREW, HEX HEAD, MOD |
| 682 | NUT, HEX-STD (UNC-2B) |
| 683 | NUT, HEX-SLTD (UNC-2B) |
| 684 | WASHER FLAT. 5/8 NOM WIDE |
| 685 | PIN, COTTER |
| 686 | CLIP; LOCK TAB CLIP, TWO BENT TABS |
| 687 | ASSY,SCREW LOCK |
| 688 | HAIRPIN,COTTER,TDS9S (PACK OF 25) **SEE TEXT** |
| 689 | WASHER, FLAT NARROW |
| 690 | PIN, COTTER |
| 691 | PIN,PIVOT,TIEBACK |
| 692 | PIN,RETAINER |
| 693 | BUSHING,THRUST,1.00x2.00,FIBERGLIDE |
| 694 | BUSHING,SLEEVE,1.00x1.25,FIBERGLIDE |
| 695 | PIN,ROLL |
| 696 | FERRULE, SAFETY CABLE (50 FERRULES PER MAGAZINE) |
| 697 | CABLE, SAFETY |
| 698 | (MT)CABLE, SAFETY |
| 699 | (MT)CABLE, SAFETY .032 |
| 700 | CONNECTOR |
| 701 | CABLE,NYLON COATED |
| 702 | SLEEVE WIRE ROPE SWAGE009375 INMATL STAI |
| 703 | Chain AccessoryHOBBLE CLAMPAPI-8CFOR SECURING OF M |
| 704 | GASKET,BLOWER,7.6X12.5 |
| 705 | (MT)GASKET,MOTOR-PLATE |
| 706 | O-RING, \\"S\\" TUBE, TDS |
| 707 | O RING |
| 708 | O-RING |
| 709 | O-RING |
| 710 | O-RING |
| 711 | BLOCK, MOUNTING, RUBBER |
| 712 | (MT)GASKET,BLOWER,SCROLL (SEE TEXT) |
| 713 | GASKET,DUCT/BLOWER |
| 714 | O-RING |
| 715 | O-RING |
| 716 | TDS9S SEAL,BODY |
| 717 | GASKET,MOTOR |
| 718 | O-RING |
| 719 | GASKET,COVER |
| 720 | WASHERSEALINGNOM SZ M10MATL STEELZINC PLATEDTHK 1. |
| 721 | SEAL, OPPOSITE DRIVE END |
| 722 | SEAL,SHAFT,INTERNAL |
| 723 | SEAL, PROPRIETARYODE SEALTOP DRIVESTDS-11PRESSURIZ |
| 724 | SEAL KIT |
| 725 | GROMMET |
| 726 | SEALS,ACCUM,6\\" |
| 727 | SEAL KIT FLOOR 4\\" ID ACCUMULATOR |
| 728 | O-RING |
| 729 | O RING |
| 730 | PAD, PROPRIETARY;NEOPRENE ACCUMULATOR PADDING;TOP |
| 731 | O-RING |
| 732 | O-RING |
| 733 | PROTECTOR,PIPE,RUBBER,4.5x6.75 |
| 734 | SEAL,LIP,HAMMER UNION,3.0 |
| 735 | SEAL,LIP,4.0 |
| 736 | TDS WIRE FERRULE YELLOW |
| 737 | TDS WIRE FERRULE RED |
| 738 | Fitting, Grease;Ball Check;Straight;Dia .125 in;PT |
| 739 | LOAD CONTROL VALVE, NOT PRE ADJUSTED |
| 740 | Die;BJ Tong Pyramid;Thk .5 in;L 5.0 in;W 1.25 in;0 |
| 741 | NOV;RETAINER,SELF-LOCK,TDS9S (PACK OF 10), |
| 742 | MAIN SHAFT |
| 743 | RETAINER,LANDING,COLLAR |
| 744 | ADAPTER,S-TUBE |
| 745 | GEAR,ADAPTER,LINK,ROTATING |
| 746 | MANIFOLD,ALUMINUM,ROTATING HEAD MOTOR,8S |
| 747 | MANIFOLD,MACH,ALUM TDS9S |
| 748 | MANIFOLD,PREFILL VALVE |
| 749 | LOCK,TOOL,JOINT |
| 750 | YOKE,IBOP,ACTUATOR |
| 751 | CLEVIS,CYLINDER,LINK-TILT TDS9S |
| 752 | FEMALE ROD CLEVIS |
| 753 | MANIFOLD,RELIEF,C'BAL TDS9S |
| 754 | CLEVIS,ROD-END,1.5-12UNC |
| 755 | S-PIPE,OUTSIDE,RH,WELD,7500,TDS9 (T) |
| 756 | ASSY,PLUG,3\\"FIG 1002 (T) |
| 757 | S-PIPE,ELBOW 7500 |
| 758 | LUG,COUNTERBALANCE |
| 759 | LOCK, PROPRIETARY;BAIL;TOP DRIVES |
| 760 | LINK PLATE,HANG-OFF 214\\" OAL |
| 761 | Installation & Commisioning charges= Day rate * no of days required for commissioning ( Maximum 7 days) FSR day rate AS PER IMPETUS CONTRACT Please Enable Macros to View BoQ information |
