|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. low level white vitreous china flushing cistern & C.P. flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design, complete including painting of fittings and brackets, cutting and making good the wall & floor wherever required |
| 2 | W.C. pan with ISI marked white soild plastic seat and lid. |
| 3 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock |
| 4 | Providing and fixing white vitreous china water closet squatting pan |
| 5 | Orissa pattern W.C. pan of size 580x440 mm |
| 6 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge |
| 7 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 8 | 10 litre (full flush) capacity-white |
| 9 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete |
| 10 | White solid plastic seat with lid |
| 11 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 12 | Flexible pipe |
| 13 | 32 mm dia |
| 14 | Provivding and fixing of PTMT 15 mm urinal spreader size 95x69x100mm with 1/2\\" BSP thread and shapes, weighhing not less than 60gms |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. |
| 16 | 15 mm dia. nominal bore |
| 17 | 20 mm dia. nominal bore |
| 18 | 25 mm dia. nominal bore |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refiling etc. |
| 20 | 25 mm dia. nominal bore |
| 21 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 22 | 15 mm nominal bore |
| 23 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 24 | 15 mm nominal bore |
| 25 | 20 mm nominal bore |
| 26 | 25 mm nominal bore |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 28 | Providing and of fixing C.P. brass bib cock of approved quality |
| 29 | 15 mm nominal bore. |
| 30 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 31 | 15 mm nominal bore |
| 32 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality |
| 33 | 15mm nominal bore |
| 34 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 35 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 36 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 37 | 15mm nominal bore, 107mm long. Weighing not less than 110 gms. |
| 38 | Providing and fixing PTMT, push cock of approved quality and colour. |
| 39 | 15 mm nominal bore, 98mm long. Weighing not less than 75 gms. |
| 40 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete as |
| 41 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 42 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 43 | Prov. & fixing 22\\"x16\\" (550x 400 mm) beveled edge of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete |
| 44 | Providing and fixing of S.S. 1'-4\\" long 32mm bend |
| 45 | Providing and fixing of PVC cover for water storage tank cover duly ISI marked of approved make |
| 46 | i) 300 to 1000 ltr. Cap. |
| 47 | ii) 2000-5000 ltr Cap. |
| 48 | Providing and fixing of PVC low level cistern handle complete in all respects |
| 49 | Provding and fixing SFRC G.T.cover and frame size 300x300x50 mm thick made out of MS angle iron size 25X25X5 mm thick with fixing wire mesh of size 1\\"X1\\" of 10 gauge including cutting,, welding and fixing with cement concrete 1:1 1/2:3. |
| 50 | Providing and fixing of SFRC I.C cover & frame 600x 600mmx 50 mm |
| 51 | Providing and fixing white vitreous china flat back half stall urinal of size 375x390x590 mm with fittings, standard size C.P. brass flush pipe, spreaders and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Make as approved by EIC. |
| 52 | Providing and fixing low level cistern kit complete in all respect. |
| 53 | Providing and fixing Chinaware Urinal partition main screw & not bolt complete in all respect. |
| 54 | Providing and fixing SS grating complete as per site requirement |
| 55 | Providing PVC pipe of 6kg/cm2 pressure various size complete in all respect |
| 56 | Size 4\\" |
| 57 | Providing GI plug complete in all respect |
| 58 | Size 1\\" |
| 59 | Providing and fixing of Oval Shape Counter fit washbasin with C.I.Bracket with waste pipe including painting & fitting of brackets complete in all respect. |
| 60 | Providing & fixing Stainless steel grab rail of size 32 mm dia for disable toilets complete in all respect |
| 61 | P/F of Hi Flow water filter-cum-purifier including installation charges 2-3 Ltr/Minute. Make: As approved by EIC. Please Enable Macros to View BoQ information |