|
| 1 | Dismantling and Removal of existing decorative poles of 4.0 meter height installed near Buddha Stupa and infront of Parking Gate. Including disconnecting electrical connections, dismantling the pole safely and dismantling/cutting the foundation including foundation bolts upto ground level and removal of the malba of foundation from site and shifting of existing dismantle pole upto the departmental store with the help of transportation i/c loading and unloading the same etc. complete as required. |
| 2 | Dismantling and removal of existing Street Lights Poles of 12 meter height installed at central verge/Median of road including dismantling with the help of hydra machine/ long boom crane & disconnecting electrical systems, shifting the poles upto upto departmental store with the help of suitable transportation i/c loading and unloading the same etc. complete as required. |
| 3 | Dismantling and removal of existing decorative poles of 4.0 meter height installed on both sides of the road near I.P. park (Ring road) where lighting fixtures have been already stolen/missing, including dismantling of poles, cutting of foundation bolts upto ground level and removal of the malba of foundation from site and shifting of existing dismantle pole upto the departmental store with the help of transportation i/c loading and unloading the same etc. complete as required. |
| 4 | Dismantling/demolish of abandoned/existing RCC foundation from where poles have been stolen/accidental, only foundation exist, including breaking of foundation, cutting of nuts, bolts upto ground level i/c. disposal/removal of malba from site etc complete as required. |
| 5 | Dismantling of existing cable including disconnecting from existing abandoned poles including draw out from ground where exist the cable and refilling the trench and making it proper from safety view, and stacking of recovered cable including shifting upto depart store at Oberoi etc. complete as required. |
| 6 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 7 | 4 X 25 sq. mm |
| 8 | Dismantling of existing electrical panel including disconnection of the incoming supply and outgoing supply cables and shifting/installation of same panel as per location decided during execution of work including making cement concrete foundation and reconnection of incoming and all outgoing connections and testing and commissioning etc. complete as required. |
| 9 | Providing and laying in position (1:2:4) reinforced cement concrete foundation made out of ready mix M-20 grade concrete of size 750mm (L) X 750mm (B) wide and 1800mm deep i/c excavation of earth/WBM Road/CC Road, providing , cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm dia - 1800mm long (approx)-8 Nos. and reinforcement ring of cold twisted bar of 8mm dia-10 nos. (with 150mm spacing) as required with positioning of foundation bolts and providing 90 mm. (O.D.) DWC, HDPE pipe for cable entry & exit etc complete as reqd. |
| 10 | Supplying and fixing 4 Nos. M-24mm dia X 750mm long Gl foundation bolt (EN8 grade) with nuts. washer including 2 Nos. template of 3 mm thick size 320 x 320 mm with 4 nos. 28 mm dia holes, to match with PCD of Pole base plate as reqd. |
| 11 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 12 | 4X16 Sq. mm. |
| 13 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 14 | 3½ X 50 sq. mm |
| 15 | Supplying and fixing of following size of PVC insulated unarmoured Aluminium conductor cable of 1.1 KV grade of following size for pole to pole overhead laying i/c testing & commissining etc. completed as required. |
| 16 | 4X16 Sq. mm. Al. Unarmoured Cable |
| 17 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 18 | 3½ X 50 sq. mm (35mm) |
| 19 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 20 | Supplying and drawing following size of PVC insulated Aluminium conductor cable in the existing poles and bracket from cable termination connector to the fitting i/c providing suitable lugs connections etc. as reqd. |
| 21 | 3 core 2.5 sq.mm Al cable |
| 22 | Replacement of following theft/worn out panel accessories in the existing panel i/c worn/burnt out control wiring of acessories i/c. testing and commissining etc. complete as required. |
| 23 | ML-6 Heavy Duty 3 pole Contactor with 2NO+2NC Aux contact with suitable size Aluminium cable : 1 No. |
| 24 | Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75 mm X 90 mm),G. I. bolts, nuts and washers, coach screws etc. as required. |
| 25 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 26 | 100 A,30KA,FPMCCB |
| 27 | Supplying and fixing of SMC Junction box having size 140 x 140 x 95 mm Single door, pole mounted weatherproof SMC junction box compete with terminal block suitable for 25 sq. mm conductor, DIN bar, SP MCB with suitable. M.S. clamp on the existing pole for light fixture etc as required |
| 28 | Cutting road and making good the same including supply of extra quantities of mateiral i.e aggregate, moorum screening, red bajri and labour required. (a) bituminous portion |
| 29 | Supplying & fabrication of wire mesh protection frame work fabricating with 40mm x 40mm x 6 mm thick angle iron and tee iron of 40mm x 40mm x 6mm thick by making blocks of not less than 90cm x 90cm in frame i/c providing and fixing wiremesh of section 75mm x 25mm of i/c openable door from front side of the same formation with locking arrangement having weight not less than 7.75kg/sq.mtrs and shall be fixed with the help of nut bolts and all frame work is to be painted with two or more coats of synthetic enamel paint complete etc. as required. |
| 30 | Fabrication and replacement of damage/rusted indoor & outdoor cover at existing single/double feeder pillar cover made out of 2 mm thick CRCA sheet steel, duly painted with stove enamel paint/powder coated fully compartment along with arrangement of suitable size of nut bolt, lock etc. required for making etc complete as required. Please Enable Macros to View BoQ information |
