|
| 1 | Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).Second class Kail wood |
| 2 | Providing and fixing flat pressed 3 layer particle board medium density exteriorgrade (Grade I) or graded wood particle board IS : 3087 marked, to frame,backing or studding with screws etc. complete (Frames, backing or studding to bepaid separately):12 mm thick |
| 3 | Providing and fixing 4mm thick teak veneer sheet complete job. |
| 4 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) |
| 5 | Providing and applying white cement based putty of average thickness 1 mm ofapproved brand and manufacturer, over the plastered wall surface to prepare thesurface even and smooth complete. |
| 6 | Distempering with 1st quality acrylic distember (Ready mix) having VOC contentless than 50 grams/ litre of approved brand and manufacture to give an evenshade : Old work (one or more coats) |
| 7 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two ormore coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75ltr/10 sqm of approved brand and manufacture |
| 8 | Float glass panes of nominal thickness 5 mm (weight not less than12.50 kg/sqm) |
| 9 | Mirror polishing on marble work/Granite work/stone work where ever requiredto give high gloss finish complete. |
| 10 | Fixing of damaged wooden planking in flooring including laying finishing with existing material fixing with screw / adhehsive complete job. |
| 11 | Polishing and grinding on wood work wooden plank flooring on old works removing stains and polishing with wax / oil on wooden flooring surface complete job |
| 12 | Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement,masonry up to floor five level including hoisting and setting in position in cementmortar 1:6 using approved quality mud with carriage of material complete. |
| 13 | Providing and fiixng Galvanized Iron ( G.I ) hexagonal wire mesh ( chicken Mesh ) of approved brand and manufacture having mesh size of 12mm to 20mm and a minimum wire guage of 24G/22G, at the junction of RCC members and birck/ block masonry work . The mesh shall be fixed with G.I'U' nails or staples at 150mm center-to-center ensuring a minimum overlap of 50mm on both the concrete and masonry surface. The mesh must be stretched taut and securely fastened to prevent bulging during plastering including the cost of all materials labor scaffolding and tools as per the direction of the Engineer-in- charge. |
| 14 | Providing and fixing false ceiling at all height including providing and fixing offrame work made of special sections, power pressed from M.S. sheets andgalvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange ofcleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &bolts of required size and other end of angle hanger fixed with intermediate G.I.channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, towhich the ceiling section 0.5 mm thick bottom wedge of 80 mm with taperedflanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shallbe fixed in a direction perpendicular to G.I. intermediate channel with connectingclips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,including fixing perimetre channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimetre of ceiling fixed to wall/partition with the helpof rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section and perimetrechannel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c,including jointing and finishing to a flush finish of tapered and square edges ofthe board with recommended jointing compound , jointing tapes , finishing withjointing compound in 3 layers covering upto 150 mm on both sides of joint andtwo coats of primer suitable for board, all as per manufacturer's specification andalso including the cost of making openings for light fittings, grills, diffusers,cutouts made with frame of perimetre channels suitably fixed, all complete asper drawings, specification and direction of the Engineer in Charge but excludingthe cost of painting with :12.5 mm thick tapered edge Glass Reinforced Gypsum (GRG) board conformingto IS:2095- (Part 3):1996 (Boards with BIS certification marks) |
| 15 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622(thickness to be specified by the manufacturer ) of approved make in all colours,shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of cementMortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm including pointing in white cement mixed with pigment ofmatching shade complete. |
| 16 | Providing and fixing C.P. brass bib cock of approved quality conforming toIS:8931 : 15 mm nominal bore |
| 17 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS:8931 15 mm nominal bore |
| 18 | Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 gradedstone aggregate 20 mm nominal size derived from natural sources) |
| 19 | Providing and fixing or pvc connection pipe of size 24'' of good make and all complete job |
| 20 | Providing of coolie / labour for cleaning of rooms, bathroom and hostel premiss |
| 21 | 6 pin 15/16 amps modular socket outlet , ISI marked |
| 22 | Supplying & etecting ready to use Retrofit T8 LED 18/20 Tube light with aluminium houising heat sink, integrated HF electronic driver complete |
| 23 | Providing Broom |
| 24 | Providing cleaining Brush |
| 25 | Providing cleaning agent for Tile stain Remover for Bathroom cleaner & Shiner |
| 26 | Providing Harpic cleaner 1 Ltr |
| 27 | Providing and laying Polished Granite stone flooring in required design andpatterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed withcement slurry and pointing with white cement slurry admixed with pigment ofmatching shade including rubbing , curing and polishing etc. all complete asspecified and as directed by the Engineer-in-Charge.Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 28 | Structural steel work riveted, bolted or welded in built up sections, trusses andframed work, including |
| 29 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, to achieveeven shade and colour. One coat |
| 30 | Carriage of Sand by an avg lead …........... 15 km |
| 31 | Carriage of Stone aggregate by an avg lead …........... 15 km |
| 32 | Carriage of Cement and steel by an average lead …............... 5 kms Please Enable Macros to View BoQ information |
