|
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M&L Brick Work with Sub-Class 'B' Bricks (with Old Size Bricks), Straight or Curved on Plan exceeding 6.0 Metre mean Radius, built in Cement Mortar 1:6 complete all as specified and as directed. |
| 3 | M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius and all as directed. |
| 4 | M & L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping bed block etc. complete all as specified and directed. |
| 5 | M&L PCC in surface channels, benching in sewers, drains etc. type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed. |
| 6 | M & L for rendering in cement mortar (1:4) 15mm thick mixed with water proofing compound on concrete / brick masonry wall surfaces, complete as specified and directed. |
| 7 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Cover Slab of Manholes, Septic Tanks, etc., set in Cement Mortar 1:4 including demolition of existing RCC slabs, complete all as specified and as directed.NOTE: Reinforcement will be Measured and Paid separately under appropriate items. |
| 8 | M&L TMT Bars 10mm dia and overcut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. |
| 9 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and as directed. |
| 10 | M&L for 100 mm thick PCC 1:3:6 Type D-2 using 40mm graded stone aggregate as in subbase/footpath including necessary form work, complete all as specified and directed. |
| 11 | M&L for 75 mm thick PCC 1:3:6 Type D-2 using 40mm graded stone aggregate as in subbase/footpath/Plinth protection including necessary form work, complete all as specified and directed. |
| 12 | M&L For pre-polished glazed designer ENDURA tiles/dura stone, coloured, 30cm x 30cm x 10cm thick, set, jointed and pointed inadhesive compound as per manufacturers instructions, pointed in white or coloured cement to match in floors over 15mm thick Screed in 1:4 including dismantling of old tiles complete all as specified and directed. |
| 13 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, driveways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including demolition of old paver block, complete all as specified and directed. |
| 14 | M&L Heavy duty Coloured Ceramic Tiles as in steps, stairs in single piece, in flooring set and jointed in adhesive compound as per manufacturers instructions and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling of old heavy duty tiles, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
