|
| 1 | M/L for Maintenance and servicing of standby DG Set complete including draining out of diesel from tank , cleaning the tank thoroughly and refilling the drained out diesel, draining out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil to it’s required level, replacing the fuel filter, lubricating oil filter , check & clean air cleaner , change air cleaner elements, check coolant level & make up the same ,drain the fuel filter & water separator ,filling the starting batteries with electrolyte/distilled water to maintain the required specific gravity, replace the u/s brass connectors for batteries, cleaning of battery terminals & applying petroleum jelly to battery terminal posts & brass connectors, including M&L for changing of V-belts, checking of exhaust leakage, governor, breathers etc, adjust/set the same for proper functioning of DG Set, checking of fuel, oil and water/ coolant level etc, adjusting and keeping the fan belts to the desired tension, tightening all the bolts and nuts to the required torque etc, cleaning the DG Set with accessories as prescribed by the manufacturer and test for satisfactory running of DG set for two hour at connected load and record shall be made in respect of RPM , oil pressure , oil temprature , coolent temprature, frequency , load current , battery charging , fuel consumption etc complete all as spicified and directed by Enginner in Charge for 380 KVA D G set .Make - Cummins with AMF Panel. |
| 2 | All as per Item No . 1 here-in -before but for : 320 KVA DG set .Make:- `Kirloskar with AMF panel |
| 3 | All as per Item No . 1 here-in -before but for : 250 KVA DG set .Make:- `Cummins with AMF panel |
| 4 | All as per Item No . 1 here-in -before but for : 200 KVA DG set.Make:- Cummins/Kirloskar/Greaves cottan with AMF panel |
| 5 | All as per Item No . 1 here-in -before but for : 125 KVA DG set .Make:- `Kirloskar / Cummins with AMF panel |
| 6 | All as per Item No . 1 here-in -before but for : 100 KVA DG set .Make:- Kirloskar/Cummins/ Ashok leyland with AMF panel |
| 7 | All as per Item No . 1 here-in -before but for : 63 KVA DG set .Make:- Koel with AMF panel |
| 8 | All as per Item No . 1 here-in -before but for : 50 KVA DG set .Make:- Kirloskar/Cummins with AMF panel |
| 9 | All as per Item No . 1 here-in -before but for : 40 KVA DG set .Make:- `Ruston with AMF panel |
| 10 | All as per Item No . 1 here-in -before but for : 30 KVA DG set .Make:- Kirloskar with AMF panel |
| 11 | All as per Item No . 1 here-in -before but for : 25 KVA DG set .Make:- `Kirloskar with AMF panel |
| 12 | All as per Item No . 1 here-in -before but for : 20 KVA DG set .Make:- `Kirloskar with AMF panel Note for BOQ Item No 1.00 to 12.001. Engine oil for refilling will be measured and paid Seprately 2. Coolant for make up will be measured & paid separately3. DHPP will be issued by dept for testing and top up in tank only. 4. The Make of Fuel filter , Oil Filter , V belt & component will be as per existing or suitable make. 5.Spray painting of DG set as per existing colour including preparation of old surfaces all as directed by Engineer -in -Charge . 6. The rate quoted against item No. 1.00 to 12.00 is deemed to be inclusive of any break down attendance / rectification during contract period with in 72 hours of complaint received. failing which penalty @ 3000.00 per day will be recoverd from work done statemenet till rectification .7. A register for record of servicing & break down attendence shall be maintained by contract duly signed by JE /Engineer-in -Charge .8. Cost of spares & labour charges for attending break down shall be paid under relevant item of this schedule here in after. |
| 13 | Supply only Engine oil SAE 20W-40W, Make :- VOLVOLINE/ IOC/HP |
| 14 | Supply only fan belt V-Belt of size B-53 complete all as specified Make : Fenner/Cummins/Kirloskar/Dunlop |
| 15 | All as per item No 14 above but of size B-56 |
| 16 | All as per item No 14 above but of size B-58 |
| 17 | All as per item No 14 above but of size B-64 |
| 18 | All as per item No 14 above but of size B-70 |
| 19 | All as per item No 14 above but of size B-143 |
| 20 | All as per item No 14 above but of size B-180 |
| 21 | Supply only coolant for radiator all as specified and directed. Make :- TVS/HP/Castrol |
| 22 | M & L for spray painting the Generator Set including acoustic enclosure and corresponding AMF panel complete with existing colour coding of any capacity after preparation of rough unequal surface and applying two coats of synthetic enamel paint over coat of primer on old steel surface by spray painting in and including lettering and marking i.e Engine make, Engine Sl No, Alternator make, Alternator Sl No etc all as specified and directed by Engineer-in-charge. |
| 23 | S & Fix in repair/replacement of Automatic voltage regulator (AVR) full wave phase controlled adjustable (0-95V) 6A/12A Suitable for DG Set 100-250 KVA including connecting and testing complete all as specified and directed |
| 24 | Supply and fix in replacement of Lead acid battery, 12 volt, 180 AH Confirming to IS 14257-1995 |
| 25 | Supply and fix in replacement of Lead acid battery, 12 volt, 150 AH Confirming to IS 14257-1995 |
| 26 | Supply and fix in replacement of Lead acid battery, 12 volt, 100 AH Confirming to IS 14257-1995 |
| 27 | Supply and fix in replacement of Lead acid battery, 12 volt, 80 AH Confirming to IS 14257-1995 |
| 28 | M & L Repair / overhauling radiator assembly of DG set by disconnecting and removing from the engine, dismantling the top and bottom chambers, descaling the sediments, scales, corrosion etc. by means of acid, cleaning and high pressure water washing, air cleaning, re-assembling the same with new gaskets including arresting leakages, if any and fixing to the engine with new hoses, clips etc of 380/320/250/200 KVA DG Set all as required and as directed.Note: The rate quoted shall be inclusive of transporting of the radiator to the workshop and back and all incidental charges. |
| 29 | M & L in replacement of radiator assembly of DG set by disconnecting and removing from the engine of 125 KVA DG Set complete all as specified and as directed.Note: The item shall be purchased only from the original manufacturer/authorised dealer of the mentioned DG set. |
| 30 | M & L in replacement of radiator assembly of DG set by disconnecting and removing from the engine of 250 KVA DG Set complete all as specified and as directed.Note: The item shall be purchased only from the original manufacturer original manufacturer/authorised dealer of the mentioned DG set. |
| 31 | M & L Repair / overhauling Self starter assembly, 12/24 Volt DC of DG Make: Delco Remi / Lucas TVS assembly of DG Set by disconnecting and removing from the engine, cleaning of all accessories, replacing of worn out parts such as actuator ,gear, solenoid coil ,carbon brushes, bushes, contact plates, jumping leads and seals, revarnishing the field coil, armature and re-assembling the same and re-fixing into the engine including testing all as per original manufacturer's instructions and as directed. NOTE :- 1. The rate quoted by the contractor is deemed to be include for transportation of the item from site to the workshop as applicable and back. |
| 32 | Supply and fix in repair fuel shutup solenoid valve, 12/24 volts, suitable for 380 KVA DG set NOTE:- All items to be from manufacturerer's / manufacturers authorised stockiest/ distributor/ dealer only and also the contractor always keep minimum required quantities in hand as a pro-active/ preventive maint/ breakdown |
| 33 | Supply and fix in repair fuel shutup solenoid valve, 12/24 volts, suitable for 250 KVA DG set NOTE:- All items to be from manufacturerer's / manufacturers authorised stockiest/ distributor/ dealer only and also the contractor always keep minimum required quantities in hand as a pro-active/ preventive maint/ breakdown |
| 34 | Supply and fix in repair fuel shutup solenoid valve, 12/24 volts, suitable for 125 KVA DG set NOTE:- All items to be from manufacturerer's / manufacturers authorised stockiest/ distributor/ dealer only and also the contractor always keep minimum required quantities in hand as a pro-active/ preventive maint/ breakdown |
| 35 | S & Fix in replacement of SMPS based Battery charger module 24/12 volt 15/20A Amps having CC,CV, trickle,float and boost charging mode suitable for AMF Panels of DG Set 20/25/40/50/100/125/200/250/320/380 KVA capacity |
| 36 | S & Fixing in repairs Lub oil pressure transducer suitable for DG set upto 250 KVA system all as directed by Engineer-in-Charge |
| 37 | S & Fixing in repairs Lub oil pressure transducer suitable for DG set upto 125 KVA system all as directed by Engineer-in-Charge |
| 38 | S & Fixing in repairs Lub oil pressure transducer suitable for DG set upto 100 KVA system all as directed by Engineer-in-Charge |
| 39 | S & Fixing in repalacement of proximity Magnetic pickup for sensing RPM of DG set 250/380 KVA capacity with existing model all as directed by Engineer-in-Charge |
| 40 | S & Fixing in replacement of Low lub oil pressure safety switch suitable for DG set 250/200KVA and connecting with DG set system, testing complete all as directed by Engineer-in-Charge |
| 41 | S & Fixing in repairs High water temperature trip safety switch suitable for DG set 320KVA and connecting with DG set system, testing complete all as specifiied and directed by Engineer-in-charge |
| 42 | Supply & Fix in repair of ON LOAD change over switch , 4 pole , 630 Amps, in open execution / Panel mounting , front operated. |
| 43 | Supply & Fix in repair of ON LOAD change over switch , 4 pole , 400 Amps, in open execution / Panel mounting , front operated. |
| 44 | Supply & Fix in repair of ON LOAD change over switch , 4 pole , 250 Amps, in open execution / Panel mounting , front operated. |
| 45 | S & Fixing in replacement of wiring harness for 100/160/180/200/250KVA DG set with proper lugs /ferrules/nuts bolt with washers and testing the circuit as specified and directed by Engineer-in-charge |
| 46 | S & F following items in AMF Panel of any description and in any position of capacity DG Set upto 500 KVA including checking AC/DC circuits, tightning of all power / control wiring connection and replacement of unserviceable control wiring with suitable size, single core, copper conductor, flexible, PVC insulated, unsheathed cable suitable upto 1100 volts confirming to IS-694, taking out, removing and replacement of unserviceable parts / spares / items to make AMF functional inclusing testing complete all as specified and directed. |
| 47 | Pla relay 24 Volts DC, 11pin, 2 change over, cat part No. 2C/O – MPC -24D of pla make or equivalent of Eagle man. |
| 48 | Pla relay 12 Volts DC, 11pin, 2 change over, cat part No. 2C/O – MPC -12D of pla make or equivalent of Eagle man. |
| 49 | Ammeter size 96 mm X 96mm, flush mounted digital type, three phase of class 1.0 complete all as specified and directed. |
| 50 | Voltmeter size 96 mm X 96mm, flush mounted digital type, three phase, class 1.0 complete all as specified and directed. |
| 51 | Frequency meter size 96 mm X 96mm, flush mounted digital type, three phase, class 0.2 complete all as specified and directed. |
| 52 | Under voltage relay suitable for 3 phase 415 volts, AC supply complete all as specified and directed. |
| 53 | Engine starting relay with sequence timer & master timer suitable for 12 / 24 Volts DC supply complete all as specified and directed. Make: L&T/PIC / Aditya Electronic |
| 54 | Electronic timer, time range from 3 seconds to 10 seconds , suitable of 12/ 24 Volts, 50 Hz, AC supply complete all as specified and directed.Make : L&T / PIC / Aditya Electronic. |
| 55 | LED Indicator 22.5mm for 12 /24 volts AC/DC supply complete all as specified and directed.Make: L&T/ BCH / Seimens / ABB. |
| 56 | MCB single pole, 10 KA, rating 6 to 32 Amps ‘C’ series, 240 volts complete all as specified and directed. |
| 57 | M&L for repairing of canopy of DG set of any capacity by carrying out repairing of door with replacement of broken hinges including nuts, bolts/welding etc as per requirement, cleaning of base of foundation and painting with black paint MS channel with two coats including touching of paint at cannopy where required complete all as specified and directed |
| 58 | Material and labour for dismantling and taking out and rewinding of Alternator stator assembly of 320 KVA DG Set and rewinding of approved suitable gauge super enamel insulated copper winding wire with necessary insulating materials reassembling and transportation to workshop and bring back to orgins at installation and fixing,testing and commissioning complete all as specified and directed by Eng-in-charge. |
| 59 | All as per item No 48 above but of Capacity 250 KVA DG set. |
| 60 | All as per item No 48 above but of Capacity 200 KVA DG set. |
| 61 | All as per item No 48 above but of Capacity 125 KVA DG set. |
| 62 | All as per item No 48 above but of Capacity 100 KVA DG set. |
| 63 | All as per item No 48 above but of Capacity 63 KVA DG set. |
| 64 | S & F in repair governor control unit for electronic governor suitable for DG Sets of capacity 125 KVA of existing make complete all as specified and directed. |
| 65 | S & F in repair governor control unit for electronic governor suitable for DG Sets of capacity 250 KVA of existing make complete all as specified and directed. |
| 66 | S & F in repair governor control unit for electronic governor suitable for DG Sets of capacity 320 KVA of existing make complete all as specified and directed. |
| 67 | S&F in repair Actuator ETR fuel control unit of of existing make of DG sets of capacity 320-380 KVA capacity complete all as specified and directed. |
| 68 | S&F in replacement engine electronic (instrumentation) digital panel comprising of starting switch ON/OFF water temp display, hour meter cum RPM display, lubricant oil pressure display, lubricant oil tempreture display, battery charing display, safety alarm against high water temp and lubricant oil pressure for cummins/Kirloskar make DG Set of 250-320KVA capacity complete all as specified and directed |
| 69 | M&L in replacment of AMF Power contactor , 4 pole, 415 Volts, 600 Amps, 50 Hz, AC , with 2 NO and 2 NC contacts including any modification to existing panel frame size and fixing new contactor with connecting bars to the main busbar, incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. |
| 70 | M&L in replacment of AMF Power contactor , 4 pole, 415 Volts, 400 Amps, 50 Hz, AC , with 2 NO and 2 NC contacts including any modification to existing panel frame size and fixing new contactor with connecting bars to the main busbar, incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. |
| 71 | M&L in replacment of AMF Power contactor , 4 pole, 415 Volts, 320 Amps, 50 Hz, AC , with 2 NO and 2 NC contacts including any modification to existing panel frame size and fixing new contactor with connecting bars to the main busbar, incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. |
| 72 | M&L in replacment of AMF Power contactor , 4 pole, 415 Volts, 250 Amps, 50 Hz, AC , with 2 NO and 2 NC contacts including any modification to existing panel frame size and fixing new contactor with connecting bars to the main busbar, incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. |
| 73 | M&L in replacment of AMF Power contactor , 4 pole, 415 Volts, 100 Amps, 50 Hz, AC , with 2 NO and 2 NC contacts including any modification to existing panel frame size and fixing new contactor with connecting bars to the main busbar, incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. |
| 74 | M&L in replacment of AMF Power contactor , 4 pole, 415 Volts, 63 Amps, 50 Hz, AC , with 2 NO and 2 NC contacts including any modification to existing panel frame size and fixing new contactor with connecting bars to the main busbar, incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. |
| 75 | Supply only in replacement of Digital Multifunctional Panel meter for measuring Voltage ( 0-500V min ) ,(0-600A) Current , P.F,frequency on existing AMF panel including necessary P.T & C.T's with all connected acccessories all as specified and directed. |
| 76 | S & F in replacement of push button switch with NO/NC contacts 415 V ,6A , with add on Aux Contacts and connected acccessories all as specified and directed |
| 77 | S & Fix in replacement of Rotatory selector switch 3/4 way 10A for Panel meter including connection as all as specified. |
| 78 | M&L in replacment of MCCB, 3 poles 415 Volts, 100 Amps, 16 kA, ics=100%icu, 50 Hz, AC, adjustable type in the existing AMF panel board/sheet metal enclosure including any modification to existing panel frame size and fixing new MCCB with connecting bars to the main busbar and connecting up incoming/out going cables with suitable lugs and testing complete all as specified and as directed. |
| 79 | All as per item No 68 here in before but MCCB 3 pole, 125 Amps, breaking capacity Icu = 16 KA. |
| 80 | All as per item No 68 here in before but MCCB, 4 pole, 160 Amps, breaking capacity Icu = 36 KA. |
| 81 | All as per item No 68 here in before but MCCB, 4 pole, 200 Amps, breaking capacity Icu = 36 KA |
| 82 | All as per item No 68 here in before but MCCB, 4 pole, 250 Amp, breaking capacity Icu = 36 KA |
| 83 | All as per item No 68 here in before but MCCB, 4 pole, 320 Amp, breaking capacity Icu = 36 KA |
| 84 | All as per item No 68 here in before but MCCB, 4 pole, 400 Amps, breaking capacity Icu =36 KA |
| 85 | All as per item No 68 here in before but MCCB, 4 pole, 630 Amps, breaking capacity Icu = 50 KA |
| 86 | Supply and fix PVC insulated multistranded copper round cable suitable for DG sets battery lead of size 25 Sqmm all as specified |
| 87 | Supply and fix in replacement of gunmetal battery connecting terminal suitable for 12v/24v battery all as specified and directed |
| 88 | supply only spray can 500ml for cleaning electrical contacts and decarbonizing electrical parts all as specified and directed .Make : CRC/WD-40/3M |
| 89 | M & L in replacement of flywheel with gear tooth assembly and align center/level between alternator and engine and testing complete all as specified and directed by engineer in charge Make : Kirloskar/Cummins or Equivalent |
| 90 | S&F DG Set specification board made out of flexible acrylic sheet of Size 2 x 3 feet background of blue colour with white letters of size 50/40mm for alongwith all fixing arrangements different type and model of DG Set as per sample and as directed by the Engr-in-Charge including removing old existing damaged board and accessories all as directed |
| 91 | S & Fix in repair, replacement of Automatic voltage regulator (AVR) full wave phase controlled adjustable (0-95V) 6A/12A Suitable for DG Set AVR(MODEL AS440)S/F STAMFORD and other equal models including connecting and testing complete all as specified and directed |
| 92 | Supply, installation, testing and commissioning in replacement of factory made AMF panel Outdoor type,Doubledoor , cubical type front operated, totally enclosed, dust and vermin proof, floor mounted made out of CRCA sheet 3.15 mm thick , powder coated with all control wiring from front, oprated panel shall have provision for termination of UG cable for incomming / outgoing and necessary gland plates including cable termination with cable glands shall be provided at bottom of the panel suitable for DG set 380 KVA,415V, 3 phase 50 Hz 4 wire system including Auto main supply failure monitor (AMF) control relays, voltage & current sensors, supply failure timer, restoration timer control unit incorporating automatic engine start/stop/Auto/manual/test, indicators for load/mains status with announciator, Push button for engine start/stop, 600 Amps 3 Pole Power contactors with OLR relay - 02 Nos and MCCB 3 Poles 630 Amps 36 KA rating with ics=100%icu with adjustable thermal over load and magnetic short circuit releases - 2 Nos, with in build seperate chamber for On load change over switch with the the same having capacity of 630 Amps - 01 Nos ( for by pass system), Copper busbar having 850 A rating for phase & Neutral which is duly insulated with proper colour coding , One battery charger in built for charging batteries with 24V 20A SCR Controlled Battery Charger , selector switch and DC voltmeter & Ammeter all as specified and directed by Engineer-in-charge. Make of MCCB & POWER CONTACTORS : ABB/L&T/C&S/Legrand .Make of Panel : as per list of make of panel in Appx 'B' of PS. |
| 93 | Supply, installation, testing and commissioning in replacement of factory made AMF panel Outdoor type,Doubledoor , cubical type front operated, totally enclosed, dust and vermin proof, floor mounted made out of CRCA sheet 3.15 mm thick , powder coated with all control wiring from front, oprated panel shall have provision for termination of UG cable for incomming / outgoing and necessary gland plates including cable termination with cable glands shall be provided at bottom of the panel suitable for DG set 250KVA,415V, 3 phase 50 Hz 4 wire system including Auto main supply failure monitor (AMF) control relays, voltage & current sensors, supply failure timer, restoration timer control unit incorporating automatic engine start/stop/Auto/manual/test, indicators for load/mains status with announciator, Push button for engine start/stop, 360 Amps 4 Pole Power contactors with OLR relay - 02 Nos and MCCB 4 Poles 360 Amps 36 KA rating with ics=100%icu with adjustable thermal over load and magnetic short circuit releases - 2 Nos, with in build seperate chamber for On load change over switch with the the same having capacity of 360 Amps - 02 Nos ( for Main & DG by pass system), Copper busbar having 450 A rating for phase & Neutral which is duly insulated with proper colour coding , One battery charger in built for charging batteries with 24V 20A SCR Controlled Battery Charger , selector switch and DC voltmeter & Ammeter all as specified and directed by Engineer-in-charge. Make of MCCB & POWER CONTACTORS : Legrand/ABB/L&T/C&S .Make of Panel : Make of Panel : as per list of make of panel in Appx 'B' of PS. |
| 94 | Supply, installation, testing and commissioning in replacement of factory made AMF panel Outdoor type,Doubledoor , cubical type front operated, totally enclosed, dust and vermin proof, floor mounted made out of CRCA sheet 3.15 mm thick , powder coated with all control wiring from front, oprated panel shall have provision for termination of UG cable for incomming / outgoing and necessary gland plates including cable termination with cable glands shall be provided at bottom of the panel suitable for DG set 200 KVA,415V, 3 phase 50 Hz 4 wire system including main supply failure monitor (AMF) control relays, voltage & current sensors, supply failure timer, restoration timer control unit incorporating automatic engine start/stop/Auto/manual/test, indicators for load/mains status with announciator, Push button for engine start/stop, 320 Amps 4 Pole Power contactors with OLR relay - 02 Nos and MCCB 4 Poles 320 Amps 36 KA rating with ics=100%icu with adjustable thermal over load and magnetic short circuit releases - 2 Nos, with in build seperate chamber for On load change over switch with the the same having capacity of 400 Amps - 02 Nos ( for Main & DG by pass system), Copper busbar having 400A rating for phase & Neutral which is duly insulated with proper colour coding , One battery charger in built for charging batteries with 24V 20A SCR Controlled Battery Charger , selector switch and DC voltmeter & Ammeter all as specified and directed by Engineer-in-charge. Make of MCCB & POWER CONTACTORS : Legrand/ABB/L&T/C&S .Make of Panel : Make of Panel : as per list of make of panel in Appx 'B' of PS. |
| 95 | Supply, installation, testing and commissioning in replacement of factory made AMF panel Outdoor type,Doubledoor , cubical type front operated, totally enclosed, dust and vermin proof, floor mounted made out of CRCA sheet 3.15 mm thick , powder coated with all control wiring from front, oprated panel shall have provision for termination of UG cable for incomming / outgoing and necessary gland plates including cable termination with cable glands shall be provided at bottom of the panel suitable for DG set 125 KVA,415V, 3 phase 50 Hz 4 wire system including main supply failure monitor (AMF) control relays, voltage & current sensors, supply failure timer, restoration timer control unit incorporating automatic engine start/stop/Auto/manual/test, indicators for load/mains status with announciator, Push button for engine start/stop, 200 Amps 4 Pole Power contactors with OLR relay - 02 Nos and MCCB 4 Poles 200 Amps 36 KA rating with ics=100%icu with adjustable thermal over load and magnetic short circuit releases - 2 Nos, with in build seperate chamber for On load change over switch with the the same having capacity of 250 Amps - 02 Nos ( for Main & DG by pass system), Copper busbar having 250 A rating for phase & Neutral which is duly insulated with proper colour coding , One battery charger in built for charging batteries with 24V 20A SCR Controlled Battery Charger , selector switch and DC voltmeter & Ammeter all as specified and directed by Engineer-in-charge. Make of MCCB & POWER CONTACTORS : Legrand/ABB/L&T/C&S .Make of Panel : Make of Panel : as per list of make of panel in Appx 'B' of PS. |
| 96 | M&L for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50Mtrs below ground level) connected to GI strip 36×6mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm GI tubing medium grade and necessary fitting for protection of GI strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, PCC chamber using PCC(1:3:6) type C-1 using 20mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm C/C both ways with MS handle 8mm dia, plastering 15mm thick CM (1:6) externally up to 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on Electrical plate No.3 of SSR Part-I (2009) and connected to earth test point incl testing and marking Bldg Nos and writing Test Results (in white) on a black painted M.S. Plate (size 300x300x3mm th) duly welded with angle iron of size 40X40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.Note :- (i) GI strip and GI pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) Excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) The rates quoted by the contractor are deemed to be included for PCC chamber and PCC cover as per SSR part-1. |
| 97 | M & L for overhauling of complete DG set of capacity 50 KVA by disconnecting and removing the following parts from the engine, and refixing/re-assembling the new parts on site/workshop complete all as specified and directed by Engr-in-Charge. (a)Valve,intake (b) Bearing,coonecting rod (c) seal,oil (d) Seal, O ring (e) Sender-pressure (f) Valve,exhaust (g) collet valve (h) spring, valve (i) Gasket Cylinder head (j) Camshaft (k) Kit, Engine piston (l) Cover, accessory drive (m) Injector (n) Pin, Piston (o) Retainer , Valve spring (p) Gasket, Gear cover (q) Sensor-Temperature.Note: (1)The rate quoted shall be inclusive of transporting of the complete engine to the workshop and back and all incidental charges. (2) The overhauling will be carried out by only the OEM and the parts should be purchased from the authorised dealer only. |
| 98 | M&L in replacement for controller display EMS 907 including necessary programming ,restoring the data and complete all as specified and directed. |
| 99 | M&L in replacement for controller display SEDMAC-KG-645 including necessary programming ,restoring the data and complete all as specified and directed. |
| 100 | M&L in replacement for controller display POWER COMMAND HMI-211- including necessary programming ,restoring the data and complete all as specified and directed. |
| 101 | Supply only in replacement of monoblock motor pump suitable for fuel refilling ,1.5 HP, single phase,complete all as specified and directed. |
| 102 | Supply only in replacement of flexible PVC pipe,nylon threaded,transparent type of size 1.5\\" for fuel filling to DG set complete all as specified and directed. |
| 103 | M&L in repair for necessary PCC (1:2:4) type B2 ,40 mm graded aggregate for foundation of DG Set, AMF Panel,Pathway to DG Set for making the smooth access from Road complete all as specified and directed. |
| 104 | M&L in repair for necessary PCC (1:3:6) type C1 , 20 mm graded aggregate for foundation of DG Set, AMF Panel,Pathway to DG Set for making the smooth access from Road complete all as specified and directed. |
| 105 | M & L for overhauling of complete DG set of capacity 40 KVA by disconnecting and removing the following parts from the engine, and refixing/re-assembling the new parts on site/workshop complete all as specified and directed by Engr-in-Charge. (a)Valve,intake (b) Bearing,coonecting rod (c) seal,oil (d) Seal, O ring (e) Sender-pressure (f) Valve,exhaust (g) collet valve (h) spring, valve (i) Gasket Cylinder head (j) Camshaft (k) Kit, Engine piston (l) Cover, accessory drive (m) Injector (n) Pin, Piston (o) Retainer , Valve spring (p) Gasket, Gear cover (q) Sensor-Temperature.Note: (1)The rate quoted shall be inclusive of transporting of the complete engine to the workshop and back and all incidental charges. (2) The overhauling will be carried out by only the OEM and the parts should be purchased from the authorised dealer only. |
| 106 | M & L for overhauling of complete DG set of capacity 100 KVA by disconnecting and removing the following parts from the engine, and refixing/re-assembling the new parts on site/workshop complete all as specified and directed by Engr-in-Charge. (a)Valve,intake (b) Bearing,coonecting rod (c) seal,oil (d) Seal, O ring (e) Sender-pressure (f) Valve,exhaust (g) collet valve (h) spring, valve (i) Gasket Cylinder head (j) Camshaft (k) Kit, Engine piston (l) Cover, accessory drive (m) Injector (n) Pin, Piston (o) Retainer , Valve spring (p) Gasket, Gear cover (q) Sensor-Temperature.Note: (1)The rate quoted shall be inclusive of transporting of the complete engine to the workshop and back and all incidental charges. (2) The overhauling will be carried out by only the OEM and the parts should be purchased from the authorised dealer only. |
| 107 | M&L for opening of Generator Engine Head of capacity 320 KVA Generator by taking out complete Engine section using Hydra and taking the complete engine section to the authorised workshop and replacement of unserviceble or burned out spare parts as follows. (a) Engine piston -10 Nos (b) Engine Liner -10 Nos (c) Ring set - 10 Nos (d) Head Packing Kit set - 01 Nos (e) Main bearing - 12 Nos (f) CR Bearing - 12 Nos (g) Thrust washer (h) water seperator - 01 Nos (i) Oil lubrication sensor - 01 Nos (j) Inlet valve - 12 Nos (k) Exhaust valve - 12 Nos (l) Hose pipe set - 1 Set (m) O ring set - 01 set (n) Anabond - 04 Nos (o) Cylinder Head cover gasket -12 Nos (p) Turbo Job - 01 Nos (q) Fuel pump and injector - 01 Set (r) Stem seal set - 12 Nos . |
| 108 | M&L for opening of Generator Engine Head of capacity 250 KVA Generator by taking out complete Engine section using Hydra and taking the complete engine section to the authorised workshop and replacement of unserviceble or burned out spare parts as follows. (a) Engine piston -10 Nos (b) Engine Liner -10 Nos (c) Ring set - 10 Nos (d) Head Packing Kit set - 01 Nos (e) Main bearing - 12 Nos (f) CR Bearing - 12 Nos (g) Thrust washer (h) water seperator - 01 Nos (i) Oil lubrication sensor - 01 Nos (j) Inlet valve - 12 Nos (k) Exhaust valve - 12 Nos (l) Hose pipe set - 1 Set (m) O ring set - 01 set (n) Anabond - 04 Nos (o) Cylinder Head cover gasket -12 Nos (p) Turbo Job - 01 Nos (q) Fuel pump and injector - 01 Set (r) Stem seal set - 12 Nos . |
| 109 | M&L for opening of Generator Engine Head of capacity 200 KVA Generator by taking out complete Engine section using Hydra and taking the complete engine section to the authorised workshop and replacement of unserviceble or burned out spare parts as follows. (a) Engine piston -10 Nos (b) Engine Liner -10 Nos (c) Ring set - 10 Nos (d) Head Packing Kit set - 01 Nos (e) Main bearing - 12 Nos (f) CR Bearing - 12 Nos (g) Thrust washer (h) water seperator - 01 Nos (i) Oil lubrication sensor - 01 Nos (j) Inlet valve - 12 Nos (k) Exhaust valve - 12 Nos (l) Hose pipe set - 1 Set (m) O ring set - 01 set (n) Anabond - 04 Nos (o) Cylinder Head cover gasket -12 Nos (p) Turbo Job - 01 Nos (q) Fuel pump and injector - 01 Set (r) Stem seal set - 12 Nos . |
| 110 | M&L in replacement of Engine Head piston suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 111 | M&L in replacement of Engine Head piston suitable for Generator capacity 125 KVA complete all as specified and directed |
| 112 | M&L in replacement of Engine Liner suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 113 | M&L in replacement of Engine Liner suitable for Generator capacity 125 KVA complete all as specified and directed. |
| 114 | M&L in replacement of Engine Main bearing suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 115 | M&L in replacement of Engine Main bearing suitable for Generator capacity 125 KVA complete all as specified and directed. |
| 116 | M&L in replacement of Engine CR bearing suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 117 | M&L in replacement of Engine CR bearing suitable for Generator capacity 125 KVA complete all as specified and directed. |
| 118 | M&L in replacement of Engine Cylinder head cover gasket suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 119 | M&L in replacement of Engine Cylinder head cover gasket suitable for Generator capacity 125 KVA complete all as specified and directed. |
| 120 | M&L in replacement of Engine Fuel pump and injector suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 121 | M&L in replacement of Engine Fuel pump and injector suitable for Generator capacity 125 KVA complete all as specified and directed. |
| 122 | M&L in replacement of Engine water pump seperator suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 123 | M&L in replacement of Engine water pump seperator suitable for Generator capacity 125 KVA complete all as specified and directed. |
| 124 | M&L in replacement of Engine O ring set suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 125 | M&L in replacement of Engine O ring set suitable for Generator capacity 125 KVA complete all as specified and directed. |
| 126 | M&L in replacement of Oil pump suitable for Generator capacity 380 KVA complete all as specified and directed. |
| 127 | M&L in replacement of Oil pump suitable for Generator capacity 125 KVA complete all as specified and directed. Please Enable Macros to View BoQ information |
