Tender For special Repair Of Bldg No P-155 And Including Certain Revenue & Minor Works Under Ge (W) Hisar At Hisar Mil Stn
Tender Value
37.56 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
4 days left
EMD
75200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of Bldg No P-155 And Including Certain Revenue & Minor Works Under Ge (W) Hisar At Hisar Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling brick tiles in single layer on roof (laid dry and pointed) complete all as specified and directed. |
| 2 | Demolition Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof)and removing debries out of MD land complete all as specified and directed. |
| 3 | M&L for cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in padding, levelling course and the like finish even and fair 50mm avg. thickness including preparation of RCC roof surface(old or new) with wire brush, drying and cleaning top surface to remove all loose particles, filling the cracks with crack filler complete all as specifie and directed. |
| 4 | M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces,rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 5 | Supply only water proofing compound complete all as specified and directed. |
| 6 | M&L for Bitumen primer for use in waterproofing and damp-proofing treatments. |
| 7 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) land on primed surface, upper side of membrane thermally insulated with white gravel finish, uniformaly laid with dry torch application including side overlaps of 75mm and end slab shalll be 100mm and all over laps and joints shall be sealed by torch application complete all as specified and directed. |
| 8 | M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 9 | Dismantling of floor tiling cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the remises complete all as specified and directed. |
| 10 | M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes of CM 1:6 complete all as specified and directed. |
| 11 | M&L non skid ceramic tiles 7 to 8 mm thick light shade (Square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over and including provision of cement screed bedding layer 15 mm thick in CM 1:6 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 12 | M&L Cement concrete 1:4:8 flooing type D-2, in sub base of floor using 40mm graded aggregate) complete all as specified and directed. |
| 13 | M&L chequered cement concrete tiles 25cmx25cmx25mm thick with mixture of gray and white cement in equal proportion and no pigment, set,jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 14 | M&L for coloured glazed ceramic tiles in vertical surface 300X450X7 mm/ 450X350X7mm thick set and jointed in neat cement slurry and pointed in white cement to match over and including 10mm thick baking coat in CM 1:4 complete all as specified and directed. |
| 15 | Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces. Trowelled to even and smooth finish without using extra cement including taking down existing cement plaster complete all as specified and directed. |
| 16 | M&L for Preparation of New plastered surface of wall and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 17 | M & L one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 18 | M&L for Preparation of New / untreated plastered surface of wall including complete removal of existing treatment and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 19 | Taking down chowkats or frame not exc 1.5 Sqm each with shutters ( without taking out shutters from the frame) complete all as specified and directed. |
| 20 | Taking down chowkats or frame , area exc 1.5 sqm but not exc 4sqm each with shutter( without taking off shutter from the frames) complete all as specified and directed. |
| 21 | S&F in repair superior quality SS Curtain rod, 20mm dia with and including fancy type SS bracket 2 Nos for each opening and SS side Knob (fancy type) of required shape and size 2 Nos of each opening complete all as specified and directed. |
| 22 | S&F Powder coated Anodised aluminium frame for doors, frame for sliding windows(three panels,two panels for glass and one for wire mesh) ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 23 | S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. NOTE: Glass panes and wire cloth shall measured separately and Rubber beading will not be weighed and not to be paid seperately. |
| 24 | S&F Powder coated Anodised aluminium Sliding window and ventilator shutters, without sash bar, aluminium section weighing 0.55 kg/m including all necessary joining connection, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,aluminium sliding window metal lock with screws etc. complete all as specified and directed.NOTE: Glass panes and wire cloth shall measured separately and Rubber beading will not be weighed and not to be paid separately. |
| 25 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and directed. |
| 26 | S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 27 | S&F of Solid PVC Door Frame of size 50mm x47mmmade out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 28 | S&F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications complete all as specified and directed. |
| 29 | S&F made single extruded WPC (Wood Polymer composite)) Solid door/ window/clerestory windows & other Frames/ chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) calcium carboante and natural fibers (Wood powder/roce hisk/wheat husk) and non toxic additives (maximum toxicity index of 12 of 100 gms)fabricated with miter joints after applying PVC Solvent cement and screwed with full body threaded star headed SS screwes having minimum frame density of 750 Kg/cim screw withdrawal strength of 2200 N (Face) & 1100 N (Edge) minimum compressive strength of 58 N/mm2 modulus of elasticty 900 N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasterners of required dia and lentgh complete all as specified and directed. |
| 30 | Factory made single extruded WPC (Wood Polymer Composite) Solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspensio Grade) calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and non toxicity additive (maximum toxicity index of12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Eage) minimum compressive strength 50 N/mm2 modulus of elastcity 850 N/mm2 and reistance to spread of flame of class A category with property of being termite/borer proof, water /moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 31 | S&F 150 mm extruded Aluminium handles, cast type,anodised complete all as specified and directed. |
| 32 | S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 33 | S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 34 | S&F 150 mm extruded Aluminium hinges, cast type,anodised complete all as specified and directed. |
| 35 | S&F of Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 36 | S&F of Aluminium Mortice lock, vertical type of 2 levers of size 100 mm complete all as specified and directed. |
| 37 | S&F of Floor door stopper of 150mm length of cover plate,aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed. |
| 38 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size (P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of cement concrete bedding & making good to floor including taking out old one complete all as specified and directed. |
| 39 | S&F of Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect complete all as specified and directed. |
| 40 | S&F in repair 10 Litre capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required complete all as specified and directed. |
| 41 | S&F 10 Litre capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required complete all as specified and directed. |
| 42 | S&F in repair Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 43 | S&F Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps, and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed. |
| 44 | S&F in repair 15 mm long body bib tap (fancy type), cast copper alloy chromium plated with clutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 45 | M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed. |
| 46 | Supply & fixing Vitreous China wash down water closet pan (pedestal pattern), with P and S trap with and including plastic water closet seat cover, connected to trap, flushing pipe, anti-syphonage pipe etc complete all as specified and directed. |
| 47 | S&F fancy type chromium plated angle valves, cast copper alloy with clutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed. |
| 48 | Supply& fixing of 32mm bore Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms suitable for urinal complete all as specified and directed. |
| 49 | S&F brass CP basin mixer long shank / pop up for mixing hot &cold water screwd down for iron pipe and fixed in repair complete all as specified and directed. |
| 50 | S&F Liquid soap container of CPT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) complete all as specified and directed. |
| 51 | S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum) weight 90gms complete all as specified and directed. |
| 52 | S&F in repairs 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 53 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 54 | S&F of Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and directed. |
| 55 | S&F in repairs of Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 56 | Dismantling of cast iron pipes any size of bore as in soil waste or vent pipe including removal of cement joints fixed to wall or laid in floor complete all as specified and directed. |
| 57 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps in repair complete all as specified and directed. |
| 58 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps in repair complete all as specified and directed. |
| 59 | S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 60 | S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed. |
| 61 | S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 62 | S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. |
| 63 | S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. |
| 64 | S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed. |
| 65 | Supplying and laying of 16 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and directed. |
| 66 | S&F16 mm Brass Elbow for special fitting of CPVC pipe complete all as specified and directed. |
| 67 | S&F Brass Tee 16mm for special fitting of CPVC pipe complete all as specified and directed. |
| 68 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and directed |
| 69 | S&F20 mm Brass Elbow for special fitting of CPVC pipe complete all as specified and directed. |
| 70 | S&F 20mm Brass Tee 16mm for special fitting of CPVC pipe complete all as specified and directed. |
| 71 | S&F of Grating round 140 mm size of PTMT (Minimum weight 50gms) complete all as specified and directed. |
| 72 | S&F rotational molded polyethlene water storage tank(White in colour) of 1000 ltr (Tripple layer white in colour Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified and directed. |
| 73 | S&F gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified and directed. |
| 74 | S & fixing ball brass valve polythene float of 20mm bore complete all as specified and directed. |
| 75 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed. |
| 76 | M&L PCC 1:4:8 Type D2 (40 mm graded aggragate) as in fdn, filling and mass concrete complete all as specified and directed. |
| 77 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 78 | Removing excavated soil exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. |
| 79 | Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed. |
| 80 | M&L for Brickwork built with flyash brick in CM 1:6 with subclass `B' bricks, straight or curved on plan exc 6m mean radius complete all as specified and directed. |
| 81 | High strength deformed TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 82 | High strength deformed TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 83 | M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvves including supports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and directed. |
| 84 | M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed. |
| 85 | M&L RCC M-20 as in plinth Beams,concrete band, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 86 | M&L RCC M-20 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 87 | M&L 75 mm of thick PCC (1:3:6) type C-2 as in plinth protection, complete all as specified and directed. |
| 88 | Rendering 10 mm thick on brick masonry surfaces in CM(1:6) finished even and smooth with out using extra cement complete all as specified and directed. |
| 89 | Rendering 15 mm thick on brick masonry surfaces in CM(1:4) finished even and smooth with out using extra cement complete all as specified and directed. |
| 90 | Rendering 5 mm thick on ceiling surfaces in CM(1:3) finished even and smooth with out using extra cement complete all as specified and directed. |
| 91 | M & L two coat of oil bound distemper on 3mm wall care putty new plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 92 | M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of white wash complete all as specified and directed. |
| 93 | M& L for preparation of New surfaces of Ceiling and applying Two coat of white wash complete all as specified and directed. |
| 94 | M&L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 95 | M&L for Preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome complete all as specified and directed. |
| 96 | M&L of type C-2,1:3:6 using 40mm graded agregate for Concrete bed to drain pipes of size 110 mm including packing under, and haunching :against the sides of pipes after they are laid and all as specifie an directed. |
| 97 | M&L for precast reinforced cement concrete type B1, 1:2:4 using 20mm graded stone aggregate in cover slabs (for manholes etc), water (tank/drain) cover, shelves, landing and similar articles with plain faces incl necessary moulds and setting in CM 1:4 complete all as specified and directed. NOTE : Reinforcement to be measured separately. |
| 98 | Cutting into existing manholes for connecting new drains, any dia bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed. |
| 99 | Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 100 | S&F of Anodised aluminium snap grid of size 605mm x 605mm frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 101 | M&L for 6mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed.NOTE : Frame work for ceiling shall be measured and paid separately). |
| 102 | M & L for one coat of oil bound distemper on old or new plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 103 | Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, and removing surplus soil to a distance n.exc 50 m in soft/ loose soil complete all as specified and directed. |
| 104 | Removal of excavated soil to a distance exc 1.5 Km but n.exc 5 Km and depositing where directed complete all as specified and directed. |
| 105 | M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 106 | S&F MS work in posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc, flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe290 Gde E-165 complete all as specified and directed. |
| 107 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire complete all as specified and directed. |
| 108 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed. |
| 109 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long Dia meter of Shank 5 to 10 mm complete all as specified and directed. |
| 110 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 111 | Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed. |
| 112 | Material and labour for point wiring one light/Fan point controlled by one, one way switch with 1.5 sqmm FR single core PVC insulated and unsheathed multistranded copper conductorre and incl PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated in pressed steel terminal boxes with 3mm thick bakelite sheet top cover incl 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed. |
| 113 | Description all as per item No 114.00 above but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 114 | Description all as per item No 114.00 above but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed. |
| 115 | Description all as per item No 114.00 above but point wiring with 2.5 sq mm single core FR cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 116 | Description all as per item No 114.00 above but point wiring with 4 sq mm single core FR cables and earth continuity wire with 4 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed. |
| 117 | S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts complete all as specified and directed. |
| 118 | S&F Modular switch 1 way 16A 1 module complete all as specified and directed. |
| 119 | S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed. |
| 120 | S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed. |
| 121 | S & F for lamp holder including Highly efficient LED Bulbs, 9 watt insulated body with back plate suitable for batten fittings etc complete all as specified and directed. |
| 122 | S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed. |
| 123 | Supply & fixing Modular type (1/2 module as per site requirement) ceiling fan regulator electronic step type suitable for 1200mm/1400mm sweep fan complete all as specified and directed. |
| 124 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 125 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 126 | Supply & fixing in replacement of Bldg security light fitting LED 35 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40 mm bore light grade, 1.5 mtr length and fixed with MS Calmps of size 40x5 mm- 02 nos ,nuts, bolts and washers on wall. all as specified and directed. |
| 127 | S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp rating copper bus bar complete all as specified and directed. |
| 128 | Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB |
| 129 | Supply and fixing MCBs SPN 32Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB |
| 130 | M&L in replacement for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth (Plate) electrode at one end and connected to main switch board / DB at the other, earth wire protected by and incl GI pipe 15 mm dia (medium grade) from top of electrode to main switch board and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc all as shown on electrical plate No 3 of SSR - 2009 Part I complete all as specified and directed. |
| 131 | S&F in replacement PVC air fresh air Fan 200/250 mm sweep, 230 volts, fixed on wall with suitable size nut, bolts and washers and connection complete all as specified & directed. Note; Make a hole as per site requirement rate include in this price Make Orient and its equivalent and verified by local area manager complete all as specified and directed. |
| 132 | Taking down carefully copper/aluminium Submain wiring from battan /conduit from DBs,MCBs, etc) and making good to disturbed surfaces of walls, floor etc complete all as specified and directed. |
| 133 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 134 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armouredwith galvanised steel wire or tape and overall PVC sheathed 16sq. mm 2 core nominal cross section in service connections complete all as specified and directed. |
| 135 | Supply and Fixing LED light fittings 36/42 watt Recess mounting light i , 3 way mounting arrangement Sheet aluminium housing with high quality LGP and PMMA diffuser. Separate HPF driver 240 volt along with fixing arrangements all as specified and directed.(Note; Colour of light as per direction of Engr-In-Charge)Make Orients or its equivalent complete all as specified and directed. |
| 136 | S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 137 | M&L For tubes medium grade galvanized with all fittings fitted in walls, GI pipe line of different size all as specified and directed by E- in- charge 20 MM (3/4”) dia complete all as specified and directed. |
| 138 | S & F for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed. Make :- Orients and its equivalent |
| 139 | M & L service wire size 10 sqmm 2 core complete all as specified and directed. |
| 140 | Supply and fixing sanitary pad/napkin destroyer (incinerator) of size 205mmx205mmx435mm and approximate weight of 11 kg wall mounting with automatic digital display controller, equipped with push button to start ,indicator, safety MCB , flexible smoke hose pipe of 5 feet ,auto turn off feature , burning capacity of 80 to 100 napkins per day and 5 to 6 napkins per cycle at a time ,burning time 20 to 30 minutes per cycle suitable for operation on single phase 230 v ,50 HZ supply complete all as specified and directed.Make : BELLA/SMART VEND/SANDELETAA/RIYA/NAKSHATRA/RELAYCURE Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 days