Tender For Certain Repair / Maintenance Works To Certain Bldgs Of Malhotra Enclave, 1, 2 & 3 Med Regt,Asc, Rodrigues Enclave And Ta Bn At Chh Shambhajinagar Mil Station Under Ge(S) Ahilyanagar
Tender Value
49 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chh Sambhajinagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair / Maintenance Works To Certain Bldgs Of Malhotra Enclave, 1, 2 & 3 Med Regt,Asc, Rodrigues Enclave And Ta Bn At Chh Shambhajinagar Mil Station Under Ge(S) Ahilyanagar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster of any description on brick, block or stone walls or ceilings etc (at any height) incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for rendering 10mm thick on in CM 1:6 fair faces of brick/concrete sufaces surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed. |
| 3 | M&L for 15mm thick plaster in CM 1:4 (using water proofing liquid as per manufacturers instructions) on other than fair faces of brick work masonary surface or concrete surface finished even and fair without using extra cement complete all as specified and directed. |
| 4 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan, exc 6 m mean redius, built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed. |
| 5 | M&L for preparation of new plastered internal surfaces of wall and applying two coat of acrylic distemper of required shade and colour complete including one coat of primer as per manufacturer's specifications in any colour complete all as specified and directed. |
| 6 | M&L for preparation of new plastered surfaces or previously untreated sufaces of walls and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 7 | M&L for newly plastered wall surfaces, preparation of surface and applying applying two coats of 100% premium exterior acrylic emulsion paint (weather coat) alkali & fungal resistance, dirt resistance of required shade over and including priming coat of exterior primer complete all as specified and as directed. |
| 8 | M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed. |
| 9 | M&L for applying 1.5 mm thick of Birla/ JK wall care putty in new or old decorated surfaces of walls and sanding the surfaces till smooth finish is obtained for receiving finishes complete all as specified and as directed |
| 10 | M&L for Preparation of old decorated surfaces of walls and applying two coats of white wash complete all as specified . |
| 11 | M&L for Preparation of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified . |
| 12 | M&L for preparing of old surfaces of walls, pillasters, cornices etc by washing, rubbing down & stopping etc and applying two coats of acrylic distemper in any colour complete all as specified and as directed. |
| 13 | M&L for complete removal of existing treatment on old decorated plastered suface of external walls & applying two coats of Exterior Acrylic Emulsion paint over one coat of primer including wall crack filler as required complete all as specified & directed by Engr in charge. |
| 14 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 15 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 16 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing rubbish off premises etc complete all as specified and as directed. |
| 17 | M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 18 | M & L for Non-skid coloured Ceramic tiles mat finish 7 to 8 mm thick (square /Rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 19 | Ditto- all as per Item No. 18.00 above but as in skirting set and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 20 | M & L for Vitrified tiles double charged (light shade) 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm (600x600mm), in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 21 | Ditto- all as per Item No. 20.00 above but as in dado/skirting or on vertical surfaces and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 22 | M&L for 9-10 mm thick Double charged/ ultracharged vitrified tiles (any shade) Square or rectangular as in floors area of each tile exc 0.42 Sqm but n exc 1.00 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and a directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 23 | Ditto- all as per Item No. 22.00 above but as in dado/skirting or on vertical surfaces and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 24 | M&L for glazed coloured ceramic tiles in vertical surfaces as in dado of size 450mm x 300mm x 6-7 mm thick, set and jointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar 1:3, on other than fair faces of brick work etc complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge. |
| 25 | Dismantling of kota, granite, cudappa stone slab, and interlocking tiles of any descriptionor thickness in floor, laid, bedded & pointed in any mortar, all as specified and as directed. |
| 26 | M&L for machine cut Kota stone flooring 18 to 22 mm thick (size of kota stone slab 22\\"x22\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 27 | All as per item No. 26.00 above but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick cement mortar 1:3 all as specified and as directed.Note : Riser provided to steps shall be in one piece. |
| 28 | M & L for 18-20mm thick prepolished Granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/platform, gate pillars, cills etc or on vertical surfaces including vertical projections, including full round mouldings the edges laid over and over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture of pigments to match the shade of granite and rubbing polishing to achieve mirror finish complete all as specified & directed. Note:- Colour/shade to be decided by Engineer-in-Charge. |
| 29 | M&L for 75mm thick PCC 1:3:6, type C2 (using 20mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed. |
| 30 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in PCC band, PCC beam, coping,gap filling,slightly rounded or chamfered angles and throating, and similar work including necessary formwork complete all as specified and as directed. |
| 31 | M&L for PCC 25 mm thick (1:2:4) type B-1 using 20 mm graded stone as sub base/levelling course in floors aggregate complete all as specified & directed. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed. |
| 33 | Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and as directed. |
| 34 | Taking down shutters of any description, area exc 1 sqm & n.exc 2 sqm each leaf and complete all as specified & as directed. |
| 35 | M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand confirming to Fe-290 (Gde E165) including preparing back of chowkhat and simlar applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and as directed. |
| 36 | M & L cement concrete 1:2:4 type B-0 (12.5 mm graded agg) as in bed block ,hold fast, coping and similar work etc complete all as specified and as directed. |
| 37 | S&F 35mm thick, flush shutter, factory made, solid core construction, with block board core and plywood face panels, commercial type on both faces fixed to chowkhats, including teak wood beading 6mm thick all around complete all as specified and as directed. |
| 38 | S&F 35mm thick IInd class hard wood glazed skelton shutters,factory made,open rebated and prepared to recive glass,guage etc,(with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat complete all as specified and as directed. |
| 39 | S&F Factory made solid PVC door frame of size 50x47 mm made out of 5mm PVC sheet reinforced with MS square tube, supplying and fixing opening as per specification & drawing given in SSR 2009 Part-I complete all as specified and as directed. |
| 40 | S&F Factory made solid panel wood grain printed PVC door shutter 30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of wood grain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed. |
| 41 | S&F Powder coated anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed by Engr-in-charge.Note:- Colour to be decided by Engineer-in-Charge. |
| 42 | S&F Powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminium snap beading screws etc complete all as specified.Note:- Colour to be decided by Engineer-in-Charge. |
| 43 | S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed comprises of following sections :- (a) Window frame (i) Bottom- Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m)(b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note:- Colour to be decided by Engineer-in-Charge. |
| 44 | S&F in position 4.8 to 5mm thick clear/float/frosted glass exc 0.5 sqm in each pane, of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame work complete all as specified and as directed. |
| 45 | S&F in position 4.8 to 5mm thick clear/float/frosted glass not exc 0.5 sqm in each pane, of ordinary quality and glazing with glazing clips including necessary rubber packing to aluminium frame work complete all as specified and as directed. |
| 46 | S&F in repair powder coated anodised aluminium ventilator having aluminium section weighing 0.55 kg/m, including Sliding louvers,frosted 3mm thick glass,SS wiremesh including arrangement for fixing of exhaust fan and necessay joining cleats,glazing clips,screws etc complete all as specified.Note:- Shade and size to be decided by Engineer-in-Charge. |
| 47 | S&F in repairs for Framed work such as grills, gratings, etc with ends of barsshouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors,ladders; framed baluster,railings and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 48 | S&F 0.9m to 1.5m bottom door seal brown for aluminium frame 38 to 45mm wide all as specified and directed. |
| 49 | S&F in repair mild steel helical door spring 150mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and as directed by Engr-in-charge. |
| 50 | M&L for preparation of new wooden surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of pink primer complete all as specified and directed. |
| 51 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade over a coat of red oxide primer complete all as specified and directed. |
| 52 | S&F SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 53 | S&F in repair SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 54 | S&F in repair 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and as directed. |
| 55 | S&F 100 mm long SS butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed. |
| 56 | S&F 150mm aluminium handle fabricated type, anodised conforming to IS complete all as specified and as directed. |
| 57 | S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed. |
| 58 | S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 59 | S&F in repair window venetian blinds of approved colour imported cloth blinds, horizontal / Vertical including stainless steel channels, sliding nylone rope & all necessary fittings and fixtures as required complete all as Spd & directed by Enginner-in-Charge.Note:- Design and Colour to be approved by Engineer-in-Charge. |
| 60 | Resecuring or Easing of door shutters exc 1 sqm but n.exc 2 Sqm for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed by Engr-in-charge. |
| 61 | Resecuring or Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs,tightening piano hinges incl misc small adjustments complete all as specified and as directed by Engr-in-charge. |
| 62 | Hacking out of old broken glass (any thickness ,size quality or description/ any height of bldg ) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 63 | S&F 3 mm thick frosted/figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane to steel windows including glazing pins etc. complete all as specified and as directed. |
| 64 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square n.exc 0.50 sqm in each pane, of any description complete all as specified and as directed. |
| 65 | Taking up or down 15 mm bore dia GI steel tubing and connections complete all as specified and as directed. |
| 66 | Taking up or down 20 mm bore dia GI steel tubing and connections complete all as specified and as directed. |
| 67 | M&L for 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 68 | M&L for 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings such as socket, elbow, bends, tee, reucer, union, caps plug, nipple etc complete laid in walls/ceilings or laying in floor trench or fixed to walls complete all as specified and as directed |
| 69 | M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting notexc 10 cm girth complete all as specified and directed. |
| 70 | S&F in repair PVC connection, 15 mm size with PTMT nuts, 450 mm long complete all as specified and directed. |
| 71 | S&F in repairs PVC waste pipe 32mm bore plain 600mm long complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 72 | S&F in repairs PVC waste pipe 32mm bore plain 600mm long complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender