Tender For Provn Of Basket Ball Court, special Repairs To Physics Lab, Chemistry Lab And Biology Lab At Kvs Under Ge Hisar At Mil Stn Hisar
Tender Value
47.61 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
4 days left
EMD
95220
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Basket Ball Court, special Repairs To Physics Lab, Chemistry Lab And Biology Lab At Kvs Under Ge Hisar At Mil Stn Hisar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan (including getting out and disposal of excavated earth lead upto 50 mtr and and lift upto 1.5 m, complete all as specified and directed by Engr-in-Charge. |
| 2 | Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed by Engr-in-Charge. |
| 3 | Returning filling in, including spreading leveling, watering and well ramming in layer n exc 25 cm in soft/loose soil, complete all as specified and directed by Engr-in-Charge. |
| 4 | Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not esceeding 1.5 m above the starting point all as specified and directed. |
| 5 | M&L for hard core of guage not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick watered and well rammed to a true surface, complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for rolling and consolidating formation surface in cutting with hand roller 0.8 to 1.5 tonne complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as sub base, foundation, filling & mass concrete, complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for 100 mm thick plain cement concrete type B-2, 1:3:6 (using 40mm graded aggregate) as in sub base of floors all as specified and directed by Engr-in-Charge. |
| 9 | M&L for 75 mm thick Plain Cement Concrete type B-1, 1:2:4 (using 20 mm graded aggregate) as in flooring, finishing cement concrete surface even and smooth without using extra cement, all as specified and directed by Engr-in-Charge. |
| 10 | M & L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 11 | M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 12 | M&L rendering 15 mm thick in cement mortar 1:4 on concrete/stone surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for preparation of new plastered surfaces of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm all as per the manufacturers instructions, complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L for kota sone slab 20-25 mm thick, in one piece, in riser of steps, above block masonary, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for forming Construction joint 60 mm deep x 10 mm wide filled with sealing compound Grade B, compolete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for forming contraction dummy joints 30mm deep x 10mm wide filled with sealing compound grade B, complete all as specified and diected by Engr-in-Charge. |
| 17 | M&L for painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking painting, white or golden yellow or colour as approved complete all as specified and directed. |
| 18 | S&F for 50mm Dia High Grade GI Pipe fixed cross section frame around 25 mm thick acrylic back board (size 1200 x 1800) alongwith high quality basket ring positioned 3.05 m height from ground (spring action slam dunk rings and net) including providing and attching it to 200 mm Dia High Grade GI Pipe incl necessary excavation (depth 1500 mm), foundation PCC (1:2:4), painting (and complete as per BFI & FIBA norms), complete all as specifed and directed by Engr-in-Charge. |
| 19 | M&L for providing, supplying and installation of 8 Layer acrylic synthetic flooring for basket ball court (3 to 4 mm thick) over Plain cement concrete with following stages given below:-PATCH:- 100% Acrylic based emulsion to repair cracks of concrete and asphalt pavement It should be carried out after 30 days from the date of placement of concrete.PRIMER :- 100% Acrylic Unic Floor based emulsion to improve bond of acrylic court system tot eh concrete or asphalt surface.RESURFACER :- 02 layer of Acrylic Resurfacer 367-30 for filling and smoothing asphalt or concrete surfaces in preparation for Acrylic ITF approved tennis court system, and filles the surface chips, voids and conceals repairs while providing a smooth surface for colour coating.CUSHION COAT :- 02 layer of Acrylic Floor cushion for asphalt or concrete surfaces in preparation for Acrylic ITF approved system.ULTRA CUSHION COAT :- 02 Layers of Acrylic Floor cushion for asphalt or concrete surfaces in prepararion for Acrylic ITF approved system.PRECOATand COLOUR COAT :- 02 layers of Acrylic based textured antislip coloured topcoat. Ideal for colour coating tennis and basketball courts and other sport pavement surfaces complete all as specified and directed.[Note:- Over 30 days old from the date of placement of concrete alongwith repairing of cracks of concrete and asphalt surfaces the Acrylic Synthetic Flooring work of Basketball is carried out] |
| 20 | M&L for light shade Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 as in floors complete all as specified and as directed by Engineer-in-Charge. |
| 21 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engineer-in-Charge. |
| 23 | M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat of 10 mm thick cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 25 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each and fixing the same after adjusting, easing and resizing complete all as specified and directed. |
| 26 | M&L for plain, solid, straight chowkats and frames of second class hardwood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints, complete all as specified & directed. |
| 27 | M&L for 12 mm thick veneered decorative ply wood, grade I (with BWR resin) decorative veneers on both faces complete all as specified and as directed by Engineer in charge. |
| 28 | M&L for 18mm wide & 4mm thick teak wood lipping / beading / edging fixed with nails to wooden board with & including French Polish complete all as specified & as directed. |
| 29 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open), ISI marked, fixed with CP steel screws complete all as specified and as directed. |
| 30 | S&F 75 mm extruded aluminium handles cast type anodised complete all as specified and as directed. |
| 31 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified & as directed. |
| 32 | S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & as directed. |
| 33 | S&F in repairs White vitreous china laboratory sink size 600x450x200 including 32 mm dia waste coupling and waste pipe complete all as specified and as directed. |
| 34 | M&L M-25 (20mm graded aggregates), nominal mix for Slabs supported on walls, complete all as specified and directed by Engineer-in-Charge. |
| 35 | M&L for formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs,, landings and similar works, not exceeding 200mm thick (Horizontal or sloping) complete all as specified & as directed. |
| 36 | M&L 10mm dia and over, TMT bars, cut to length, bend to shape required including cranking bending spirally for hoping for columns hooking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to deformed or twisted bars complete all as specified & as directed. |
| 37 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in in CM 1:6 complete all as specified & as directed. |
| 38 | M&L for preparation of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots etc and applying two coat of white wash complete all as specified & directed by Engineer-in-Charge. |
| 39 | M&L for preparation of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying two coats of oil bound distemper complete all as specified & directed by Engineer-in-Charge. |
| 40 | M&L for preparation of old painted wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L for preparation of old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-Charge. |
| 42 | S&F in repairs 15 mm bore GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc. complete all as specified & as directed. |
| 43 | Taking down cement plaster of any description built in cement mortor complete all as specified and directed. |
| 44 | M&L for 10mm thick cement plasters in CM 1:6 on concrete or brick wall surfaces finished even & smooth with out using extra cement complete all as specified and directed. |
| 45 | M&L for applying 3mm thick wall care putty on wall surface complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer complete all as specified. |
| 47 | S&F for rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule including necessary fittings complete all as specifed and as directed. |
| 48 | S&F hollow PVC Wall Lining (Panelling) consisting of min 5-7mm thick coloured or textured PVC sheet fixed to PVC fillet frame with screws inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing (including refixing of all fittings on the surface after completion of the work) complete all as specifed and as directed. |
| 49 | S&F PVC/polyster/vinyl coloured or textured material roller mechanism venetion blinds for window complete as per specifications and approval from Engineer-in-Charge. |
| 50 | M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed set, jointed and pointed in chemical resistant mortar, resin type, in floors over and icluding screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed. |
| 51 | M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed set, jointed and pointed in chemical resistant mortar, resin type and pointed in white or colour cement on vertical surfaces to match over and icluding a backing coat of 10 mm thick cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 52 | Supply, erecting & fixing true vertical position steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) complete all as specified and directed.Note :- (i) Earth work & PCC shall be measured and paid separately in respective items. |
| 53 | Supply and laying and testing cable XLPE insullated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor,1100 Volts, grade cross sectional area 16 sqmm 4 core complete all as specified and directed. |
| 54 | Supply and laying of DWC pipe of size 50/38 for cable protection complete with coupler etc. complete all as specified and as directed. |
| 55 | Excavation in trenches n. exc 1.5 m wide and not exc 1.5 m in depth and getting out for laying of pipes/cable in any type of soil complete all as specified and directed by Engr-in-charge. |
| 56 | S&F LED flood light fitting of capacity 120W for high mast light, efficacy >110LPW (or nearest higher Cap), 240 Volts, energy saving, environmental friendly, long life, exclusive innovative, die cast aluminium IP66 flood light suitable for highlighting architectural facade and general purpose lighting complete with accessories, pre-wired upto a terminal block and mounting attachment complete all as specified and directed. |
| 57 | Supply of outdoor stand mounted feeder pillar 32 A TPN MCB incomer,single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 Nos 9A contractors and raise lower push button, incoming 35 Sqmm and outgoing 16 & 2.5 Sqmm terminals (type STD4) complete all as specified and as directed. |
| 58 | Supply and fixing MS cross arm, angle, clamps, nuts, bolts and washers and supply and fixing new MS Cross arms, MS strrep bracings, supports, clamp and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any type, shape or as indicated and directed inclusive of one coat of red oxide and one coat of aluminium paint complete all as specified and directed. |
| 59 | M&L for earthing complete with copper earth plate electrode of size 600mx600mmx3.15 mm, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr deep below normal ground level, connected to copper earth strip by means of bolts, nuts, check nuts and washers of copper or brass and connected to earthing test point / distribution board/equipments or any other indicated situation all as shown in electrical plate No 3 of SSR Part I (2009) and testing on completion including necessary excavation in any type of soil, returning filling, removing of soil and 1.5 mtr length GI medium grade 20mm dia pipe with funnal and wire mesh, PCC chamber of 1:2:4 type B1 using 20 mm grade stone aggregate, 40 mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate and reinforced with 8mm dia TMT bars at 150mm c/c on both ways pre cast chamber cover with lifiting handle 16mm dia round bars, Gi pipe medium grade 40 mm dia for earth strip protaction including charcol, common salt complete all as specified and directed. |
| 60 | M&L for copper conductor unarmoured cable XLPE Insulated and PVC Inner sheathed of size 3 core 1.5 Sqmm complete all as specified and as directed. |
| 61 | Taking down carefully copper/aluminium point wiring from battan (light, fan, socket or power) complete, fittings such as switches, ceiling roses, pendants, regulator, sockets and DBs,MCBs,Sub main wiring,pipes etc) and making good disturbed surfaces of walls, floor etc. complete all as specified and as directed. |
| 62 | Taking down carefully all existing ceiling fan/exhaust fan and deposite in E/M store before commencement of work complete all as specified and as directed. |
| 63 | M&L for point wiring for one light point/bulb point controlled by one nos, one way switch with 1.5 sq mm, single core ,PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS -694 marked, with multistandard copper conductors and earth continuity wire with similar 1.5 Sq mm cable (incl connecting to earth dolly) drawn through and incl cutting chasing in wall and incl rigid PVC conduit and conduit accessories / fittings, fixed / laid concealed in walls and surface on ceilings and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following |
| 64 | All as per item No 63 above but for one fan/ext fan point controlled by one nos, one way switch. |
| 65 | All as per item No 63 above but one three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on independent board. |
| 66 | All as per item No 63 above one three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board. |
| 67 | All as per item No 63 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board. |
| 68 | Supply and fix single pole one way 5/6 Amp rating switch piano type 230/250 volts grade on top covers complete all as specified and as directed. |
| 69 | Supply and fix single pole one way 15/16 Amp rating switch piano type 230/250 volts grade on top covers complete all as specified and as directed. |
| 70 | Supply and fix socket 3 pin 5 Amp (with 2 pin outlet) outlet multipurpose type complete all as specified and as directed. |
| 71 | Supply and fix socket 3 pin 15 Amp (with 3 pin 5Amp outlet also) outlet multipurpose type complete all as specified and as directed. |
| 72 | S&F of ceiling rose, three terminals, PVC/polycarbonate, isolated body complete all as specified and as directed. |
| 73 | S&F in factory made, sheet steel distribution boards, TP&N 6 Ways Double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and as directed. |
| 74 | S&F in factory made, sheet steel distribution boards, SP&N 8 Ways Double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and as directed. |
| 75 | S&F in factory made, sheet steel distribution boards, SP&N 12 Ways Double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and as directed. |
| 76 | Supply and fixing MCCB, 4 Pole, 415 V, adjustable type, 160 Amps with breaking capacity 36 Amps, IS-8828 marked and fixing in DBs (DBs to be measured separately) complete all as specified and as directed. |
| 77 | Supply and fixing MCBs, SPN 63 Amps, 10 KA rupturing capacity, IS-8828 marked and fixing in DBs (DBs to be measured separately) complete all as specified and as directed. |
| 78 | Supply and fixing MCBs, SP 6 to 32 Amps, 10 KA rupturing capacity, IS-8828 marked and fixing in DBs (DBs to be measured separately) complete all as specified and as directed. |
| 79 | Supply and fixing in replacement of sub main wiring with two runs of 10 Sq mm size main cable and one run of 10 Sq mm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable size with multi stranded copper conductors, 1100 volts grade, IS-694 marked, with the specified runs/size of earth continuity conductor of similar type cable, all drawn-through and including suitable size rigid PVC conduit and fittings / accessories, all fixed to concealed in walls/ceiling complete all as specified. (Note :- Two runs of main wire and one runs of earth continuity conductor and one run of conduit with accessories shall be measured as one run length). |
| 80 | Supply and fixing in replacement of sub main wiring with two runs of 6 Sqmm size main cable and one run of 6 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FRLS cable size with multi stranded copper conductors, 1100 volts grade, IS-694 marked, with the specified runs/size of earth continuity conductor of similar type cable, all drawn-through and including suitable size rigid PVC conduit and fittings / accessories, all fixed to concealed in walls/ceiling complete all as specified. (Note :- Two runs of main wire and one runs of earth continuity conductor and one run of conduit with accessories shall be measured as one run length). |
| 81 | Supply and fixing LED lights fitting 1x 40W, 220V, AC wall mounted aluminium LED batten (4FT) with higher efficacy & integrated electronic driver with efficacy of 100 lumen/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 82 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for surface mounted including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 83 | S&F Lamp holder insulated body with 15W LED bulb, back plate suitable for battan fitting complete all as specified and as directed. |
| 84 | Supply and fix BLDC ceiling fans with remote, complete with three blade, down rod, accessories 230V, 1400mm sweep, 245 CFM with service value 6.00 BEE, 5 star rated with Brushless Direct Current Motor complete all as specified and as directed. |
| 85 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 86 | S&F wall mounting fan, copper winding, 400 mm sweep, 230 volts, fixed on wall and with suitable size nut, bolts and washers complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 days