Tender For Additional/Alteration & Improvement Of Dining Hall, Store Room And Path Of 16 Dr Coyaji Road (Residence Of Mg Aad, Hq Sc), special Repair To Exam Room And Counseling Room Of Bldg No 58 And Pl Repair To Bldg No 06/F For Other Rank Living Sh
Tender Value
43.60 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
1 days left
EMD
87200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE NORTH PUNE → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional/Alteration & Improvement Of Dining Hall, Store Room And Path Of 16 Dr Coyaji Road (Residence Of Mg Aad, Hq Sc), special Repair To Exam Room And Counseling Room Of Bldg No 58 And Pl Repair To Bldg No 06/F For Other Rank Living Shelter , Hq 41 Arty Div Under Age B/R (East ) Of Ge(North) Pune
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of concrete in ground floors and pavings n. exc 15 cm thick ( above or below the ground level) complete all as specified and as directed. |
| 2 | Excavation in post holes (or similar holes) not exc 0.5 Cum and getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm and removing surplus soil to a distance not exc 50 mtr and making good surfaces etc complete all as specified and as directed by Engr-in-Charge. |
| 3 | S & F rolled mild steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS : 1161-1979 Gde St-240 complete all as specified and as directed. |
| 4 | Supply and fix for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B complete all as specified and as directed. |
| 5 | S & F rolled mild steel plates (plain or chequered) channels, sqares cut or notched (ordinary and countersunk) forming holes without any attachment. Fe 410 W (Gde E -250) quality - B. complete all as specified and as directed. |
| 6 | M & L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete etc complete all as specified and as directed. |
| 7 | S&F Pre-Painted galvalume aluminium zink coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws complete all as specified and as directed. |
| 8 | -Ditto- all as per item No 7, here in before but 0.50mm thick plain sheets on ridges |
| 9 | S & F Pre - painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of any color having tensile stregth of 550 Mpa as in roof covering/cladding fixed to walls fixed with self tapping screws complete all as specified and as directed. |
| 10 | S&F of Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to fe 290 grade E165 complete all as specified and as directed. |
| 11 | M & L for brickwork with subclass Flyash bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 as in man holes complete all as specified and directed. |
| 12 | M & L for preparing new steel and iron surfaces any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 13 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 14 | Returning ,filling in ,including spreading ,levelling,watering and well ramming in layers not exceeding 25cm in hard dense soil complete all as specified and as directed. |
| 15 | Removing surplus excavated soil to a distance exceeding 5 km but not exceeding 15 km and depositing where directed |
| 16 | Plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations,fillling and mass concrete complete all as specified and as directed. |
| 17 | M&L for RCC design mix M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 18 | M&L for RCC design mix M-25 (20mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 19 | M&L for flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and as directed. |
| 20 | M&L for TMT bars 10 mm dia over cut to length,bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.complete all as specified and as directed. |
| 21 | -Ditto- all as per item No 20 above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 22 | Material and labour for preparation of newly plastered wall surfaces, applying 3 mm thick wall care putty and applying two coats of oil emulsion distemper over a coat of chalk whiting primer complete all as specified and as directed. |
| 23 | Supply and fix anodised aluminium snap grid of size 605 mm x 605 mm frame work for false ceiling using 25x23x1.5mm tee both ways & wall angel of 35x25x1.5mm (wall angle to be fitted to walls by scewing on wooden plugs (inserted in wall at every 60 Cm c/c) and neatly sealed the cutting opening ) and including hangars 6 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long(all costs are included) all as specified and as directed. |
| 24 | Supply and fixing of Non asbestos fibre cement building boards 4mm thick (lake and hill design) laid/inserted to timber/ Steel /aluminum frmework in repairs complete all as specified and as directed. |
| 25 | S & F 0.56 mm thickness Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 26 | Precast cement concrete block masonry with solid blocks exc 10 cm in width in PCC 1:2:4 type B-1 and setting in cement mortar 1:4 complete all as specified and as directed. |
| 27 | M&L for Rendering with WPC in CM 1:4, 15mm thick on othe than fair faces of brick work or concrete surfaces complete all as specified and as directed. Note : WPC shall be measured and paid separately |
| 28 | Supply only Intergral waterproofing compound |
| 29 | M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces complete all as specified and as directed. |
| 30 | M & L prepaeation newly plastered of wall surfaces and applying two coats of acrylic smooth exterior paint of required shade (applied @ 1.67ltr/10 Sqm) over and including priming coat of exterior primer @2.20 Kg/10 Sqm) complete all as specified and as directed. |
| 31 | M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over over a coat of primer over 3mm thick wall care putty on wall complete all as specified and as directed. |
| 32 | M & L for dark shade/Double charged/ultra charged vetrified ceramic tiles 10mm thick (Square/rectangular) Polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 33 | All as per item No 32 above but as in skirting/Dado |
| 34 | M & L for Granite (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement withadmixture of pigment to match the shade of granite stone including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 35 | Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 36 | M&L for 75 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base of floor complete all as specified and as directed. |
| 37 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado complete all as specified and as directed. |
| 38 | M&L of Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 39 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 40 | S&F 100mm long butt hinges, medium weight, cold rolled mild steel with brass/bronze hinge pin complete all as specified and as directed. |
| 41 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 42 | S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 43 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed. |
| 44 | S&F 150mm extruded aluminium alloy handles, fabricated type anodised as complete all as specified and as directed. |
| 45 | S&F 25 mm dia SS drapery rod , including brackets, decorative knobs at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed. |
| 46 | Demolition of stone slabs and tiles laid dry or laid dry and pointed of any description or thickness in floors, apropons etc complete all as specified and as directed. |
| 47 | M&L for coloured, textured design heavy duty exterior tiles of size 300mm x 300mm x10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) and demolition of existing tiles of any description complete all as specified and as directed. Make: Johnsun Endura textured design or equivalent of Kajaria/ Somani as approved by GE. |
| 48 | S&F 5.5 mm sheet glass, ordinary quality , exc 0.5 sqm in each glass complete all as specified and as directed. |
| 49 | S &F of solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacurs complete all as specified and as directed. |
| 50 | Aluminium powder coated of three track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (Section No 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (Section No 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40x20x1.5mm weighing 0.484 Kg/m, with powder coating of min thickness 50 micron , sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, including taken existing window with chowkats of any size, complete all as specified and as directed. |
| 51 | S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and as directed. |
| 52 | S&F brass Mortice lock vertical type100 mm size 4 levers including escutcheon plates and two keys complete all as specified and as directed. |
| 53 | Spreading & levelling in layers n exc 25 cm thick & well ramming including watering as required complete all as specified and as directed. |
| 54 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12 mmdia )holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed. |
| 55 | M&L for Hardcore of Broken stone of gauge n. exc 63 mm deposited, spread and levelled in layers n exc 150 mm thick, watered and rolled / rammed to a true surface complete all as specified and as directed. |
| 56 | Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including demolition complete all as specified and as directed. |
| 57 | S&F Aluminium ( Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed in Repairs complete all as specified and as directed. |
| 58 | M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 59 | M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed. |
| 60 | M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed. |
| 61 | Supply and fix for 2mm thick polycarbonate sheets outer sky light panels clear acrylic plastic sheet for Roof / vew cutter any colour fixed with self tapping screws complete all as specified and as directed. |
| 62 | Supply and fixing of desighned fibre cement building board for fascia patti/ eaves board 12mm thick fixed to steel pulin/rafters by suitable screws complete all as specified and as directed. |
| 63 | Dismantling single layer Mangalore pattern tiles or similar tiles in roofing including necessary fillets and similar items and taking out from the site without disturbing existing false ceiling complete all as specified and as directed. |
| 64 | M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry class A-A complete all as specified and as directed. |
| 65 | M&L for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc complete all as specified and as directed. |
| 66 | Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 67 | Dismantling battens of tiles of any size and description spaced exc. 15cm including tilting fillets complete all as specified and as directed. |
| 68 | Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as specified and as directed. |
| 69 | M&L for 2nd class hard wood, clean sawn, in scantling timber unframed work complete all as specified and as directed. |
| 70 | All as per serial item No.69 here-in-before but except timber complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.) |
| 71 | Dismantling timber scantling in fillets, rails, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all as specified and as directed. |
| 72 | Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as specified and as directed. |
| 73 | M&L for Eaves/ weather boarding with 10mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape including two coat of synthetic enamal paint over one coat of suitable primer complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco |
| 74 | Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed. |
| 75 | M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc / Armstrong. |
| 76 | M&L for precast cement concrete ( design mix ) solid block masonry using Type C1, 1:3:6 (20mm graded aggregate) solid blocks, exceeding 10cm in width & setting in CM 1:6 complete. Complete all as specified and as directed. |
| 77 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water incl necessary scaffolding etc complete all as specified and directed |
| 78 | M&L For Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, plaster with two coats of OBD of any tint over a with putty complete all as specified and as directed. |
| 79 | M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and fair without using extra cement with 2% of WPC on cement incl necessary scaffolding etc upto 12 mtr height complete all as directed.(Note:WPC shall be measurned and paid in separatetly) with two coats of cement base paint on new surface complete all as specified and as directed. |
| 80 | M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade and complete all as specified and as directed. |
| 81 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed. |
| 82 | M&L for machine cut 20mm to 25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and directed |
| 83 | Taking down chowkats or frames exc.1.5 sq. m But n exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 84 | Taking down shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed |
| 85 | S&F for 35 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm lipping patti for all around the shutters complete all as specified and as directed all as specified,including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 86 | S&F in repair for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Cat louge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 87 | S&F in repairs Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm |
| 88 | S&F Stainless steel sliding door bolts, bright bolt not lesss than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as specified and as directed. |
| 89 | S&F Stainless steel Tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 90 | S&F Stainless steel Handle of 150 mm ( selected quality as approved ) long fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 91 | Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 92 | Taking out old rusted/unsv, structural steel work such as steel windows/ventilators and removing same from work site complete including necessary cuttings in brick walls complete all as specified and as directed. |
| 93 | S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including dismantling existing board complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 94 | S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down existing one complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 95 | S&F continuos(piano) hinges, stainless steel width of flaps (when open) in 20mm, 08mm thickness complete all as specified and directed. |
| 96 | S&F stainless steel handle of 75mm size (modular selected quality of design as approved) fixed with self tapping screws all as specified and directed. |
| 97 | S & F for Magnetic and connected plate to shutters and frame complete all as specified and directed. |
| 98 | S&F for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165, complete all as specified and as directed. |
| 99 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 100 | M&L for 40 mm thick Cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 101 | M&L for Double charged virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding of layer in CM 1:6 complete all as specified an directed |
| 102 | -Ditto- all as per item No 101 here in before, but on vertical surfaces of skitings, dado etc including 10mm thick cement palster in CM (1:4) of backing complete all as specified and directed |
| 103 | S&F in repairs Drapery curtain rod of metalic 25mm dia covered with PVC coating complete with MS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw complete all as specified and as directed. |
| 104 | Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other means including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emusion white or tinted over a coat of primer over one coat of wall care putty 1 to 2mm thick on walls complete all as specified and dircted by Engr-in -Charge |
| 105 | M&L for rendering 15 mm thick cement plaster on faces of brick or concrete surfaces in cement mortar(1:6) finished even and fair without using extra cement, complete all as specified and directed. |
| 106 | M&L for preparation of old wall surface of any description, width or girth, application of resin pigment and hardener to desired colour spfd pattern and applying one coat of acrylic emulsion paint (Apex) with spray guns, compressor etc in any height of Bldg complete all as specified and directed by Engr-in-Charge. |
| 107 | M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and directed by Engr-in-Charge. |
| 108 | M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enemel paint complete all as specified and directed by Engr-in-Charge. |
| 109 | Taking down cement plastering on brick or stone walls incl raking out joints hacking for key scrubbing down with water etc in shafts complete all as specified and as directed. |
| 110 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of on stone wall or brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed. |
| 111 | Material and labour for preparation of New treated plastered or unplastered surfaces of wall by removing all loose paints etc removing nails ,applying birla putty whereever required, smoothen the surface with sand paper and finally applying one coat of acrylic distemper complete all as specified and as directed. |
| 112 | Dismantling of stone masonry in cement mortar and in any position complete all as specified and as directed. |
| 113 | M & L stone walling of Random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. |
| 114 | All as per Srl item No. 113 above but except stones |
| 115 | M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/ Dense soil complete all as specified and as directed |
| 116 | Removing excavated soil to a distance exc. 1.50 km but n exc. 5 km and depositing where directed |
| 117 | M&L for Machine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/steps /slabs complete all as specified and as directed. |
| 118 | M&L for Machine cut kota stone 20-25mm thick over 10mm thick backing coat in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in riser of steps/Skirting/dado and pillar complete all as specified and as directed. |
| 119 | M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed. in floor/ pavment laid over and including 25 mm thick Crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. Note- (i) Manufacturer test certificate shall be submitted along with Sample. |
| 120 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and as directed. |
| 121 | Supply and fix 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed |
| 122 | Supply and fix 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 123 | Supply and fix stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed |
| 124 | S&F factory made 100% solid wood polymer composite (WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed.NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. Make: Rajshri/ Sintex/Duraplast/Accucell |
| 125 | M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 126 | Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 127 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges as in Coping complete all as specified and directed. |
| 128 | M&L for preparation of newly plastered surfaces and applyingFinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqmcomplete all as specified and as directed by Engineer-in-charge. |
| 129 | Supply and fix in repairs for brackets for drapery/ curtain rod, decorative type, stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed. |
| 130 | M&L for preparation of old plastered or unplastered surfaces of wall incl cornices, pillasters by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of OBD complete all as specified and directed. |
| 131 | Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge)modular white cover plate & frame after chasing in Brick masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following (Make- Finolex/ ANchor/ Grandlay/ Polycab/L&T) |
| 132 | One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed |
| 133 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed |
| 134 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed |
| 135 | Description all as per 131 here-in before but using 4.0 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 3 pin socket outlet plug point,16 Amps independent including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed |
| 136 | All as per item No 131 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5 sq mm complete all as specified and as directed. |
| 137 | Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.(Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 138 | Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed. (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 139 | S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed. (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 140 | S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed. (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 141 | S & F Ceiling rose, 3 phase / PVC / polycarbonate complete all as specified and as directed (Make:Anchor/Roma/Havells/Legrand/Indoasian) |
| 142 | S & F recess mounted 2' x 2' luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free sift illumination square LED panel 36 watts, white/Warm White powder coated CRCA housing with full window acrylic diffuser giving a complete full glow look, operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTSLS036XN or its equivalent in Bajaj/ Havells/ Phillips |
| 143 | Supply and fix wall mounted LED 18/20 watts with lumens out put not less than 2000 lumens white/ warm white, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed. Make: Bajaj Cat No. BCLAB 20W, JAQUAR Cat part No LGLZ01X020XN or equvalent of make Philips/ as approved. |
| 144 | Supply and fix wall mounted fan of size 400 mm sweep BEE ISI marked and connecting up including complete all as specified and directed. Make:- Bajaj , USHA , Havells |
| 145 | S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed |
| 146 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 147 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 148 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 149 | Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc of 10 Sqmm 2 Core Size complete all as specified and directed |
| 150 | Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 151 | Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 06, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender