Tender For Special Repair To Road And Road Furniture At Solar Power Plant And Rani Laxmibai Road Upto Bldg No. Sm-259 Under Ge (Mcte) Mhow.
Tender Value
41.26 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
0 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
HQ CWE MHOW → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Road And Road Furniture At Solar Power Plant And Rani Laxmibai Road Upto Bldg No. Sm-259 Under Ge (Mcte) Mhow.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jul-2026 |
| 2 | 07-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of surfaces of existing black top surface or bituminous macadam surfaces with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc on black top/concrete surfaces and applying evenly a tack coat with bitumenous primer using paving bitumen VG-30 at the rate of 05 kg / 10 sqm by mechanical sprayer and M&L of 40 mm thick (consolidated Thickness) Bituminious premixed hot mix Asphaltic Semi- Dence Concrete using 5.5 % binder content (VG-30 Grade paving bitumen with minimum Marshal stability 1200 kg/sqcm) by weight of total mix,rolled and compacted, mixed in mechanical hot mix plant and pre-mix material laid with mechanical paver incl premixed sand seal coat with 0.06 cu.m of sand mixed with 6.8 kg of bitumen and including rolling with 8 to 10 tonne power road roller and minimum 5Km/hour to uniform and smooth surface and consolidation to required gradient and camber complete all as specified and directed. |
| 2 | Note1 : (a) Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver, and screed temp minimum maintain not less than 140 degree cellicious finishing with electronic sensor and hydraulic controls with suitable speed 5 Km /hour and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only) (iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account. (v) Minimum bitumen content as mentioned in above item, if there is any variation in the actual binder content used, the rate shall be adjusted @ Rs. 50 /- per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than 5.5% as specified in BOQ. (vi) Prior to the execution of work started the Design mix of bituminous permix semi dense asphaltic concrete should be provide by the contractor from any Governement Engineering College or approved NABL lab and job mix should be approved by GE. (vii) Filler material for semi dense asphaltic concrete shall be cement only.(viii) The cost of Job mix & Lab/Feild Testing asper SSR/IS/MORTH as required shall be borne by the contractor.(ix) The hot mix plant should be approved from GE. |
| 3 | M & L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber complete all as specified and directed. Please Enable Macros to View BoQ information |
| 4 | M & L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 07, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender