Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc., and removing debris off the premises and stacking the serviceable bricks for re-use at site complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for brick work with sub class ‘B’ bricks (old size bricks), straight or curved on plan, exceeding 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 3 | All as per serial item No 2.00 here-in-before but except bricks (using old serviceable bricks obtained from ser item No 1.00 here-in-above) complete all as specified and as directed by Engineer-in-Charge. |
| 4 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Demolition of reinforced concrete such as roofs, floors, beams, staircase, landing, chajjas, facia and similar suspended work (reinforcement cut as required to facilitate demolition) and removing debris off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. |
| 7 | S&F Mild steel framed work as in chajjas or gates of angles or other sections with gusset plates, ladders, complete drilled for fixing of steel sheeting or other covering, doors etc., to be prepared for hanging or sliding with and including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe 410-W (Gde E-165) complete all as specified and as directed. |
| 8 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof/ chajja covering/ cladding to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of asbestos cement (corrugated, semi corrugated, translucent etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 10 | Repair to RCC sunshades, chajjas, balconies, coloumns, bands, beams and similar RCC work at any position/ height by dismantling loose/ disintegrated portion and fixing of chicken wire mesh of size 12.50 mm x 1.00 mm securing with clips/ chicken wiremesh wherever required and dubbing out with cement concrete 1:1.5:3, 15 mm to 50 mm thick, using 6 to 12 mm graded stone aggregate to make up and finished the required shape including provision of necessary scaffolding and formwork up to 04 storey building, if required and finished with 5 mm thick rendering in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge. NOTE : Supply only chicken wire mesh will be measured and paid separately under respective items. |
| 11 | Supply only chicken wire mesh of size 12.5 mm x 1.00 mm complete all as specfied and as directed by Engineer-in-Charge. |
| 12 | Taking down cement plaster on brick/ stone walls etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for 15 mm thick rendering cement plaster in Cement mortar 1:6 over brick or concrete surfaces, finished even and smooth without using extra cement and providing necessary scaffolding, safety precautions and other requisite arrangements complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for rendering 15 mm thick plaster in cement mortar 1:4 on fair faces of brick wall or on concrete surfaces and finishing the surface fair and even without using extra cement and providing necessary scaffolding, safety precautions and other requisite arrangements all as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for 5 mm thick rendering in cement mortar 1:3, finished even and smooth without using extra cement, on ceiling, chajjas, facias, at any position, complete all as specified and as directed by Engineer-in-Charge. |
| 16 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., and removing rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for Screed bed or bedding layer 15 mm thick in cement mortar 1:6, for laying floor finishes complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&L for Rendering 10 mm thick in cement mortar 1:4 brick work or concrete surface, finished even and rough complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Material and labour for glazed coloured ceramic tiles on vertical surface 350 mm x 450 mm x 7 mm thick or 300 mm x 450 mm x 7 mm, joint free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and labour for non skid, joint free first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for double charged Vitrified Ceramic tiles, light shade, 10 mm thick, First quality (square/ rectagular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed by Engineer-in-Charge. |
| 23 | All as per serial item No 22.00 here-in-before but as in skirting including necessary cutting as directed complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Dismantling of boarding, any description, fixed in any position, fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 25 | Material and labour Powder coated Gl frame work grid 605 x 605 mm for ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 3mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Material and labour for 4 mm thick non-asbestos fibre cement building boards, fixed or laid/ inserted to timber/ GI/ Aluminium frame work with screws fixed in ceiling, flat or sloping complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F 18 mm thick solid WPC (wood polymer composite) board, interior grade, one side pre-laminated/ rigidlam with any colour and other side balancing lamination, fixed with screws as in cupboards/ kitchen/ cabinet shutter/ drawers etc., fixed with screws, solvent cement, adhesive complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F 25 mm thick solid WPC (wood polymer composite) board, interior grade, one side pre-laminated/ rigidlam with any colour and other side balancing lamination, fixed with screws as in shutters of cup boards and kitchen cabinets, complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply & Fixing 18 mm thick HDHMR Board for Cup board and shutters prelaminated both sides, as per approved design manufactured from hardwood and having uniform density gradient & compact core with density over 650 kg/m3, complete all as specified and directed by Engineer-in-charge. |
| 30 | S&F in repair magnetic catcher for kitchen cabinet/ cupboard fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 31 | S&F in repair continuous (piano) hinges, mild steel bright finish, width of flap 30mm, complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Taking down chowkhats or frames not exceeding 1.5 Sqm with shutters (without taking off shutters from the frame) and removal from site complete all as specified and directed by Engineer-in-charge. |
| 33 | Taking down chowkhats or frames exceeding 1.5 sqm and not exceeding 4.00 sqm each with shutters (without taking off shutters from the frame) removal from site complete all as specified and directed by Engineer-in-charge. |
| 34 | Taking down shutters exceeding 1 sqm but not exceeding 2 sqm each & removing from site complete all as specified and as directed by Engineer-in-Charge. |
| 35 | M&L for Resecuring or easing & adjusting shutters of any description exceeding 1 sqm and not exceeding 2 sqm and refixing in same opening complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) |
| 37 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size, comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 38 | S&F of pressed steel frame for doors with single rebates of size 125 x 60 mm made with steel sheet of 1.25 mm thickness in and including necessary fixing lugs, hinges, lock strike including filling of cement concrete 1:3:6, type C-1 in frame complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F of pressed steel frame for doors with single rebates of size 105 x 60 mm made with steel sheet of 1.25 mm thickness in and including necessary fixing lugs, hinges, lock strike including filling of cement concrete 1:3:6, type C-1 in frame complete all as specified and as directed by Engineer-in-Charge. |
| 40 | M&L for cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 4028, water trought and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge. |
| 42 | Supply and Fixing 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 43 | Supply and fixing stainless steel barrel tower bolt, 150 mm size (ISI Marked) of extruded section complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fixing stainless steel barrel tower bolt, 100 mm size (ISI Marked) of extruded section complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing Stainless steel sliding door bolt (ISI Marked), 250 mm long hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S&F 100 mm size butt hinges, stainless steel with galvanised mild steel hinge pin complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S&F 100 mm size stainless steel handle (ISI Marked) extruded type, complete all as specified and as directed by Engineer-in-Charge. |
| 48 | S&F 150 mm size stainless steel handle (ISI Marked) extruded type, complete all as specified and as directed by Engineer-in-Charge. |
| 49 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings including taking down of old aluminium window/ ventilator etc., complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Note:- (i) Weight of Aluminium sections shall be ascertained through a BOO convened by GE.(ii) Weight of the aluminiumn sections only shall be measured and paid.(iii) Aluminium doors window/ ventilators to be fixed to jambs with cadmium plate screws.(iv) The rate shall be inclusive of neoprene beadings, handles, hinges, screws etc. weight of fittings/ fixtures will not be measured for ariving the weight of aluminium section.(v) Glass panes and panels shall be measured & paid separately under respective items. (vi) Design shall be approved from Engineer-in-Charge as per existing at site before fabrication and placing bulk order to the manufacturer. |
| 51 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 52 | S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 53 | Supply and fixing 4.80 mm thick sheet glass, ordinary quality, tinted, fixed in any type of frame, size not exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Supply and fixing 4.80 mm thick sheet glass, ordinary quality, tinted, fixed in any type of frame, exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply and fixing 3 mm thick Sheet glass, ordinary quality and fixed in any type of frame, size in squares not exceeding 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, concrete or brick surrounds, with necessary fixing arrangements complete all as specified and as directed. |
| 56 | All as per serial item No. 54.00 here-in-above but 4 mm thick, tinted/ frosted sheet glass area not exceeding 0.5 Sqm in each pane, fixed to any type of frame complete all as specified and as directed. |
| 57 | Supply and fixing as in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 58 | Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge. |
| 59 | M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. |
| 60 | M&L for preparation of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 61 | M&L for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 62 | M&L for Preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 63 | S&F in repair Floor door stopper, 140 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engineer-in-Charge. |
| 64 | S&F in repair Pillar tap, 15 mm bore, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S&F in repair 15 mm bore angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed both ends for iron pipe for unions complete all as specified and as directed by Engineer-in-Charge. |
| 66 | S&F in repair 15 mm bore Bib taps, cast copper ally, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F in repair PVC valveless syphonic action type flushing cistern, low level, white, with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat/ pedastal pattern etc complete all as specified and as directed by Engineer-in-Charge. |
| 68 | Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. |
| 69 | Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Supply and fixing 15 mm bore tubes, “medium grade”, galvanized iron, with and including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 71 | M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engineer-in-Charge. |
| 72 | Supply and fixing 20 mm bore tubes, “medium grade”, galvanized iron, with and including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fixing vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 74 | Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 75 | S&F in repair sinks with drainage board, made of stainless steel 1 mm thick, for kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket to connecting union to pipe overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engineer-in-Charge. |
| 76 | S&F in repair double bowl sinks, made of stainless steel 1 mm thick, for kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket to connecting union to pipe overall size 915 mm x 460 mm with two bowls of size 410 mm x 330 mm x 160 mm each complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Supply and fixing plastic water closet seat cover, white, closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 79 | S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith all fittings, complete all as specified and as directed by Engineer-in-Charge. |
| 80 | S&F in repairs for 15 mm bore brass, chromium plated wall/ basin/ sink mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and as directed by Engineer-in-Charge. |
| 81 | S&F in repair 15 mm bore, brass, chromium plated, center hole WHB mixer for mixing Hot and Cold water screwed down for iron pipes complete all as specified and directed by Engineer–in-Charge. |
| 82 | S&F in repair vitreous china wash hand basin, white, flat back type of size 550 mm X 400 mm including waste, chain, flush pipe, MS Angle bracket suitable length complete all as specified and as directed by the Engineer-in-Charge. |
| 83 | S&F Bath cabinet of size 600 mm x 450 mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | S&F 25 mm dia stainless steel Curtain rod (Harrison rails) with and including brackets, finials and all fixing arrangement etc., including taking down defective curtain rod complete all as specified and as directed by the Engineer-in-Charge.Note: rate quoted against the item shall be inclusive of brackets, finials (fancy type) and all other fixing arragement for curtain rod. |
| 85 | Supply and fixing in repair towel rail 600 mm long of PTMT, chromium plated fixed with and including chromium plated screws and wooden/ plastic cleats (minimum weight 190gms), complete all as specified and as directed by the Engineer-in-Charge. |
| 86 | S&F in repair of brass chromium plated shower rose, 125 mm size with long swivel CP arm complete all as specified and as directed by the Engineer-in-Charge. |
| 87 | S&F in repair of Sheet glass shelf assembly made out of 5.5 mm thick sheet glass shelf, 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | S&F in repair corner glass shelf assembly made out of 5.5 mm thick toughened glass, 300 mm radius, bevelled edge/ hatching of edges fixed with stainless steel \\"D\\" brackets with railing complete all as specified and as directed by the Engineer-in-Charge. |
| 89 | S&F 110 mm Bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning complete all as specified and as directed by the Engineer-in-Charge. |
| 90 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer-in-Charge. |
| 91 | S&F 75 mm Bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ floor including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and as directed by the Engineer-in-Charge. |
| 94 | Material and labour for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and laid over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 95 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situations complete all as specified and as directed by the Engineer-in-Charge. |
| 96 | S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc., and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank complete all as specified and directed by Engineer-in-Charge. |
| 97 | S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc., and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank complete all as specified and as directed by Engineer-in-Charge. |
| 98 | M&L for Cleaning and removing all scale and dirt, etc. from tanks of capacity exceeding 250 litres and not exceeding 500 litres fixed at any height and from mouths of circulating pipes, etc complete all as specified and as directed by Engineer-in-Charge. |
| 99 | S&F in repair PVC connections, 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-Charge. |
| 100 | S&F Vitreous China wash down Single piece EWC water closet pan along with cistern (pedestal pattern), white (with all fittings) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. fixed as in repair complete all as specified and as directed by Engineer-in-Charge. |
| 101 | Material and labour for Solid PVC Wall/ Ceiling lining consisting of 5mm thick plain colour PVC Sheet fixing at site on PVC frame as per specification drawing but wood grain printed PVC sheet used instead of plain colour sheet complete all as specified and as directed by Engineer-in-Charge. |
| 102 | Supply & Fixing food grade stainless steel baskets of moduler kitchen (storage basket, cup and saucer basket, jas basket, thali basket, cutlery basket, grain trolley, plain basket, bottle pull out etc.) minimum loading capacity 65 KG, made out of minimum 6 mm dia stainless steel round bars, properly welded and joints finish by grinding, chromium plated finish, fixed properly with WPC board of any thickness as per approved design, including fixing of auto closing hinges, ball bearing runners of any description, stainless steel handles fixing clips, sliding frame structure, SS screw etc complete all as specified and directed by Engineer-in-charge. Note:1. Only weight of SS Wire basket will be measured before fixing.2. All fittings/ fixtures like handles, hinges, Ball bearing runners, telescopic channels etc., will be measured and paid separately as supply only. However cost for fixing of all these items shall deemed to be included in rate quoted against this item. |
| 103 | Supply only soft auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed by Engineer-in-charge.Make: Hettich/ Ebco/ Primer |
| 104 | Supply only Ball bearing runners, 45 mm wide with telescopic Channel, 20 Inch (full extension), load capacity 50 kgs, black, powder coated complete all as specified and directed by Engineer-in-charge. |
| 105 | Supply only metal profile section for each shutter in kitchen cabinets either below or above slab complete all specified. |
| 106 | Material and labour for preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge. |
| 107 | Material and labour for preparation of old decorated ceiling surfaces and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-Charge. |
| 108 | M&L for Complete removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, facias etc., using mechanical means like mechanical sander etc., with internal dust extraction system including expose sound substrata complete all as directed by Engineer-in-Charge. |
| 109 | Material and labour for applying two coats of oil bound distemper including one coat of primer over over wall surfaces prepared under serial item No. 107.00 here-in-before complete all as specified and as directed by Engineer-in-Charge. |
| 110 | Material and labour for applying two coats of oil bound distemper over and including one coat of primer on the newly plastered ceiling surfaces under serial item No. 107.00 here-in-before, complete all as specified and as directed by Engineer-in-Charge. |
| 111 | M&L for applying 1.00 mm thick layer of cement based wall care putty on new surface of wall/ ceiling complete all as specified and directed by Engineer-in-Charge. |
| 112 | Material and labour for preparation of old plastered surfaces of walls and applying one coat of cement based paint complete all as specified and as directed by Engineer-in-Charge. |
| 113 | Note for Item No. 105.00 to 111.00:(a) Work shall be carried out up to (G + 4 story building). Scaffolding, trestles, ladders, cradles and protective measures etc, as necessary for execution of work shall be provided by the contractor within overall rate quoted against the items of this schedule and no claim whatsover shall be admissible on this account at later stage. Contractors are requested to quote their rates accordingly keeping this aspect in mind.(b) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, cilings, fins, facias etc. shall be done using mechanical sander with internal dust extraction system for clean environment |
| 114 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of wall, floors, etc complete all as specified and as directed by Engineer-in-charge. |
| 115 | Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing concealed conduit of suitable size/ bore with all fittings terminated on and including new modular GI metal sunken box of thickness not less than 1.2 mm and suitable size of frame, cover for mounting modular switch, socket and regulator fixed on surface flush with wall, for One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator, complete all as specified and as directed by Engineer-in-Charge. |
| 116 | All as per serial item 112.00 here-in-before but for socket outlet 3 pin 5 Amps on same board complete all as specified and as directed by Engineer-in-Charge. |
| 117 | All as per serial item No 112.00 here-in-before but for one socket outlet 3/ 5 pin, 5 Amps on independent board complete all as specified and as directed by Engineer-in-Charge. |
| 118 | All as per Serial item No 112.00 here-in-before but for one socket outlet 3/5 pin, 15 Amps on independent board size of cable 2.5 sqmm for phase, neutral & 2.5 sqmm as earth wire complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm, 1100 volts grade for earth continuity conductor to common earth and connected to earth dolly drawn in and including concealed PVC conduit of suitable size/ bore with all fittings terminated on and including new modular GI metal sunken box of thickness not less than 1.2 mm and suitable size of frame, cover for mounting modular switch, socket and regulator fixed on surface flush with wall, for One light/ bell/ buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator, complete all as specified and as directed by Engineer-in-Charge. |
| 120 | All as per serial item No. 116.00 here-in-before but for socket outlet 3 pin 5 Amps on same board complete all as specified and as directed by Engineer-in-Charge. |
| 121 | All as per serial item No. 116.00 here-in-before but for one socket outlet 3/ 5 pin, 5 Amps on independent board complete all as specified and as directed by Engineer-in-Charge. |
| 122 | All as per Serial item No 116.00 here-in-before but for one socket outlet 3/5 pin, 15 Amps on independent board size of cable 2.5 sqmm for phase, neutral & 2.5 sqmm as earth wire complete all as specified and as directed by Engineer-in-Charge. |
| 123 | S&F modular switch, one way, 6 Amps, one module, 230 volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 124 | S&F modular switch, one way, 16 Amps, one module, 230 volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 125 | S&F modular bell push, 6 Amps, 2 module, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 126 | S&F Modular socket outlet, 2 in 1, 3 pin 6 Amps, single pole, two module, ISI marked, 230 volts complete all as specified and as directed by Engineer-in-Charge. |
| 127 | S&F Socket outlet modular type, multipurpose, 2/3 pin, single pole, two module, 6/16 Amps complete all as specified and as directed by Engineer-in-Charge. |
| 128 | S&F Modular fan step regulator, 120 watts, 2 module complete all as specified and as directed by Engineer-in-Charge. |
| 129 | S&F Ceiling rose 3 pin, 230 volts, PVC polycarbonate insulated body complete all as specified and as directed by Engineer-in-Charge. |
| 130 | S&F call bell, multi music type, AC, 230 Volts, single pole complete all as specified and as directed by Engineer-in-Charge. |
| 131 | S&F Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engineer-in-Charge. |
| 132 | S&F LED Bulb, 9 watt, Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and as directed by Engineer-in-Charge. |
| 133 | S&F in repair LED wall Lights fitting, 20/24 watt, of approx size 868 mm x 93 mm x 33 mm, 220V AC, sleek modern, scene switch type, cool/ warm white, polycarbonate body, decorative including fixed on wall/ ceiling and connecting up complete with flexible cable of suitable size and making necessary connection complete all as specified and as directed by Engineer-in-Charge. |
| 134 | S&F in repair Inverter type LED tube light batten, 4 feet length, 1 x 18/ 20 watt, 230 volts with inbuilt Lithium ion battery with charging time 8 to 10 Hours and back up time minimum 4 Hours complete including fitting fixed on wall/ ceiling and connecting up complete with flexible cable white of suitable size and making necessary connection including taking down old batten, any type complete all as specified and as directed by Engineer-in-Charge. |
| 135 | Supply and fixing in repair LED light fitting, mirror light with high out put diffuser, 2 feet, 10 watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 136 | S&F in repairs LED Mirror/ wall Lights fitting, 12 watt, 220V AC, cool/ warm white, decorative adjustable/ rotational type, approx (L) 500 mm including fitting fixed on wall/ ceiling and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge. |
| 137 | S&F in repair LED light fitting, 1 x 9W/ 1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 138 | S&F in repair LED 12/ 18W Recess/ Surface mounted, indoor type back lit downlighter suited for any modern workspace of size not less than 6'' round/ square complete all as specified and as directed by Engineer-in-Charge. |
| 139 | S&F in repair decorative, wall mounting, brushed nickel finish fixture with single opal glass diffuser suitable with 9 W LED lamp B22 base, perfect ambience for living/ bedroom complete all as specified and as directed by Engineer-in-Charge. |
| 140 | S&F in repair decorative, wall mounting, brushed nickel finish fixture with double opal glass diffuser suitable with 9 W LED lamp B22 base, perfect ambience for living/ bedroom complete all as specified and as directed by Engineer-in-Charge. |
| 141 | S&F in repair Modern Bedside wall mounted reading fitting LED 2 Watt, adjustable head for better beam and focus, control switch, uniform light LED integration for right ambience, as per sample complete all as specified and as directed by Engineer-in-Charge. |
| 142 | S&F in repair Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold finish suitable for 9 W LED lamp pettren Glaze type as per sample complete all as specified and as directed by Engineer-in-Charge. |
| 143 | S&F in repair Recess / Surface mounted LED, 1' X 1', 15 watt, cool day/warm white light, edge lit tile in extruded aluminium / CRCA steel sheet powder coated housing with full opal diffuser suitable for perfect lighting complete including cutting hole of required size in POP/ false ceiling and making good of disturbed surface complete all as specified and as directed by Engineer-in-Charge. |
| 144 | S&F in repair Recess / Surface mounted LED, 2' X 2', 36 watt, cool day/warm white light (6000 K), edge lit tile in extruded aluminium / CRCA steel sheet powder coated housing with full opal diffuser suitable for perfect lighting complete including cutting hole of required size in POP/ false ceiling and making good of disturbed surface complete all as specified and as directed by Engineer-in-Charge. |
| 145 | S&F in repairs LED building security light fitting, 1 x 35 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded in PVC cover having top opening separate driver compartment with IP65 protection including light mounting bracket made out of 25 mm bore GI light grade pipe of up to 1.2 metre length bent to shape as required including clamps of suitable size and connection complete all as specified and as directed by Engineer-in-Charge. |
| 146 | S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one number single pole MCB 20 Amps, 240 Volts for AC/ Geyser point complete all as specified and directed by Engineer-in-charge. |
| 147 | Disconnecting and taking down old unserviceable sub main wiring complete with batten of any type and size removing materials and making good disturbed surfaces of walls, floors etc., complete all as specified and directed by Engineer-in-charge. |
| 148 | M&L for Sub main wiring with two runs of single core, PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 4.0 sqmm, LT, 1100 Volts grade, drawn through existing/ new rigid PVC non metallic conduit and one run of 4.0 sqmm, single core, multi stranded copper conductor (FRLSH) cable as earth continuity conductor and connecting to existing main switch board/ DB and testing on completion complete all as specified and as directed by Engineer-in-Charge. |
| 149 | M&L for Sub main wiring with two runs of single core, PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 6.0 sqmm, LT, 1100 Volts grade, drawn through existing/ new rigid PVC non metallic conduit and one run of 6.0 sqmm, single core, multi stranded copper conductor (FRLSH) cable as earth continuity conductor and connecting to existing main switch board/ DB and testing on completion complete all as specified and as directed by Engineer-in-Charge. |
| 150 | M&L for Sub main wiring with four runs of single core, PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 10.0 sqmm, LT, 1100 Volts grade, drawn through existing/ new rigid PVC non metallic conduit and one run of 10.0 sqmm, single core, multi stranded copper conductor (FRLSH) cable as earth continuity conductor and connecting to existing main switch board/ DB and testing on completion complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 151 | M&L for Sub main wiring with four runs of single core, PVC insulated and unsheathed multistranded, copper conductor (FRLSH) cable of size 10.0 sqmm, LT, 1100 Volts grade, drawn through existing/ new rigid PVC non metallic conduit and one run of 10.0 sqmm, single core, multi stranded copper conductor (FRLSH) cable as earth continuity conductor and connecting to existing main switch board/ DB and testing on completion complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
