|
| 1 | Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in hard/dense soil getting out and levelling of bottom surface to required level all as specified and as directed. |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 Cm thick hard/dense soil all as specified and as directed. |
| 3 | Removing excavated material (Soils) from site to a distance not exc 50 M away and depositing where directed at a level not exc 1.5mtr above the starting point all as specified and as directed. |
| 4 | Taking up Cast Iron /Ductile Iron water mains of size 80mm dia (including all fittings) with spigot & socket ends and lead/tyton joints including burning out lead joints and recovering lead all as specified and directed. |
| 5 | All as per item Ser No 04 above but of size 100mm bore |
| 6 | All as per item Ser No 04 above but of size 150mm bore |
| 7 | All as per item Ser No 04 above but of size 200mm bore |
| 8 | Supplying, Laying, jointing, testing and commmisioning of DI Pipe 80mm dia as per IS 8329, class K-7 with inside cement mortar lining with spigot and socket ends laid in trenches complete all as specified and as directed at site. |
| 9 | All as per item Ser No 08 above but of size 100mm bore |
| 10 | All as per item Ser No 08 above but of size 150mm bore |
| 11 | All as per item Ser No 08 above but of size 200mm bore |
| 12 | Supply and laying in repairs of GI pipe 80mm dia medium grade ISI marked including all fittings in old/new position including fittings as per site requirement as in walls/ceilling/trenches, all as directed including taking down old GI pipe all etc complete |
| 13 | All as per item Ser No 12 above but of size 100mm bore |
| 14 | All as per item Ser No 12 above but of size 150mm bore |
| 15 | M&L for refixing/relaying of old CI/DI pipe and connections in new or old position in trench/floor of size 80mm dia all etc complete as specified and directed |
| 16 | All as per item Ser No 15 above but of size 100mm bore |
| 17 | All as per item Ser No 15 above but of size 150mm bore |
| 18 | All as per item Ser No 15 above but of size 200mm bore |
| 19 | Supply and fixing in repairs of rubber tyton ring/rubber gasket for 80mm dia CI/DI pipe complete including replacement of nut, bolts and washers all as specified and directed |
| 20 | All as per item Ser No 19 above but of size 100mm bore |
| 21 | All as per item Ser No 19 above but of size 150mm bore |
| 22 | All as per item Ser No 19 above but of size 200mm bore |
| 23 | All as per item Ser No 19 above but of size 250mm bore |
| 24 | All as per item Ser No 19 above but of size 300mm bore |
| 25 | Material and Labour for DI fittings/specials such as Tees, bends (any type, radius and angle ) tapers any type, collars,tail pieces,caps and plugs up to 250 mm bore confirming to IS: 9523 complete all as specified and directed by Engineer - in - Charge. |
| 26 | Supply and laying GI pipe of size 15mm bore, medium grade ISI marked including all fittings in old/new position as in walls and ceilling/trenches, all as specified and directed. |
| 27 | All as per item Ser No 26 above but of size 20mm bore |
| 28 | All as per item Ser No 26 above but of size 25mm bore |
| 29 | All as per item Ser No 26 above but of size 40mm bore |
| 30 | All as per item Ser No 26 above but of size 50mm bore |
| 31 | Supply and lay in repairs of 20mm dia for 3 layer (inner antimicrobial, outer UV stabalized) ISI marked, IS- 15801, PP-R, SDR 7.4, (PN16) (Polypropyelene random copolymer), and PP-R plain fittings of any type like coupling, elbow, tee, reducers elbow, reducer, reducer tee, union, tank connector, long plug, plain union, female/male threaded coupling, tee, threaded elbow all etc complete as per site requirement laid on walls/trenches of following sizes complete all as specified and as directed. Make : Finloex/SFMC/Prince/Supreme |
| 32 | All as per item Srl No 31 but of size 25mm bore |
| 33 | All as per item Srl No 31 but of size 40mm bore |
| 34 | All as per item Srl No 31 but of size 50mm bore |
| 35 | Supply and fix in repairs of PP-R gate valve (Brass insert) of 20mm dia complete all as specified and directed. |
| 36 | All as per iterm Ser No 35 above but of size 25mm bore |
| 37 | Supply & fixing bib taps, 15 mm bore, cast copper alloy Chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 38 | Supply & fix 15 mm bore Bib tap standard of PTMT any colour high pressure screwed for male/ female treaded of size 15mm bore complete all as specified and directed |
| 39 | Supplying & fixing 15mm bore gun metal gate valves/Check Valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778 including taking out unserviceable gate valves complete all as specified and as directed. |
| 40 | All as per item Srl No 39 but of size 20mm bore |
| 41 | All as per item Srl No 39 but of size 25mm bore |
| 42 | All as per item Srl No 39 but of size 40mm bore |
| 43 | All as per item Srl No 39 but of size 50mm bore |
| 44 | Supply, fixing, jointing and testing of 100mm bore Cast iron Non Return valve without by pass arrangement , Swing type, confirming to IS 5312, flanged ends pressure rating PN 1.0 complete including taking out unserviceable NRV complete all as specified and as directed at site. Note:- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this item. |
| 45 | All as per item Srl No 44 but of size 150mm bore |
| 46 | Supply, fixing, jointing & testing in repairs of 50mm bore cast Iron butterfly Valve of SS plate of sizes as under , designed for pressure PN 1.6 operating angle 90 degree , disc material CI with nylon coating, mounting type confirms to IS-13095 complete including taking out old unserviceable valve etc all as specified and directed. |
| 47 | All as per item Ser No 46 above but 80 mm (3\\") bore |
| 48 | All as per item Ser No 46 above but 100 mm (4\\") bore |
| 49 | All as per item Ser No 46 above but 150 mm (6\\") bore |
| 50 | All as per item Ser No 46 above but 200 mm (8\\") bore |
| 51 | All as per item Ser No 46 above but 250 mm (10\\") bore |
| 52 | All as per item Ser No 46 above but 300 mm (12\\") bore |
| 53 | Material and labour for removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth from the existing suction/ delivery pipe line/MS structures including headers of any size complete all as specified and directed by Engr-in-Charge. |
| 54 | Material and labour for painting to existing surcface by using spray gun with one coat of red oxide and two coat of synthetic enamel paints on existing suction/ delivery pipe lines/MS structures, including Headers of any size using Blue/Red/Black colour as per site requirement all as specified and directed by Engr-in-Charge. |
| 55 | Dismantling of existing valve chamber and construction of new valve chamber of size 1350x1000x1200mm in PCC solid block in PCC (1:5:8) type D5 built in cement mortar (1:4) with mild steel angle iron (45x45x6mm) frame including MS cover of 3mm thick and locking arrangement including excavation and earth work in soft/loose soil , PCC (1:4:8) type D2 for foundation , 50mm thick PCC coping in PCC(1:2:4) type B1 plastering in CM (1:4) 15mm thick painting with one coat of bituminous black paint on all steel surfaces all as shown on Drg No CEAA/TD/57 sheet 1/1 for the following internal sizes of valve chamber :- Please Enable Macros to View BoQ information |
| 56 | Dismantling of existing valve chamber and construction of new valve chamber of size 1350x1000x1200mm in PCC solid block in PCC (1:5:8) type D5 built in cement mortar (1:4) with mild steel angle iron (45x45x6mm) frame including MS cover of 3mm thick and locking arrangement including excavation and earth work in soft/loose soil , PCC (1:4:8) type D2 for foundation , 50mm thick PCC coping in PCC(1:2:4) type B1 plastering in CM (1:4) 15mm thick painting with one coat of bituminous black paint on all steel surfaces all as shown on Drg No CEAA/TD/57 sheet 1/1 for the following internal sizes of valve chamber :- Please Enable Macros to View BoQ information |
