|
| 1 | S & F of LED post top lantern of cap 20 watt, IP65 Rated, ideal to light up parks, gardens etc suitable for mounting on 60 mm OD pipe complete all as specified and directed .Make: CG Cat Part No -LPTH-20-CDL or equivalent in Philips/ C&S/ Havells. |
| 2 | Supply and fixing of outdoor type Decorative Post top for 360° indirect light with IP 65 protection, resistant to impact and corrosion of 240 v,50hz of capacity 40 watt LED suitable for mounting on 60 mm OD pipe on necessasry PCC works complete all as specified and directed. Make:Cat Part No : LPTO-40-CDL-M of CG or equivalent to Philips/ Havells |
| 3 | Supply and fixing of LED flood light of cap 150 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, System efficacy ≥ 110/120LPW 10KV SPD included, fixing any pole/ wall/ iron structure etc or any other location of any hight all as specified and directed.Make: CG Model No : LFLN-150-CDL/60-M or equivalent model of /Philips/Havells |
| 4 | Supply and fixing of LED flood light of cap 120 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, System efficacy ≥ 110/120LPW 10KV SPD included, fixing any pole/ wall/ iron structure etc or any other location of any hight all as specified and directed.Make: CG Model No : TFS-504-120-57-60D-SL-GL-NSG or equivalent model of /Philips/Havells |
| 5 | S & F high performance street light luminaire of cap 60 watt having single die ceramic base high power LED light source, IP66 protection with SPD version, PDC housing with finless design and polycarbonate cover all as specified and directed. Make:- CG model No TRP-421-60-57-SL-LM-NBK or equivalent to Havells |
| 6 | M&L for street light mounting bracket made up of 32 mm dia galvanised steel tubing, medium grade, 1.20 metres long, bent to shape with inner angle not less than 120°, with and including necessary fixing clamps fabricated out of angle iron/flat iron of suitable size, bolts, nuts and washers as required and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. |
| 7 | S & F PVC Insulated and PVC Round Sheathed 2 core 1.0 sqmm Bright Annealed Bare Copper Conductor Heavy Duty Flexible Cables for Voltage Grade 1100 Volts for connection of lights from junction box complete all as psecified and directed. |
| 8 | Supply and fixing pipe galvanized, “Medium grade”, including fittings 40 mm dia for PTL post, cable protection etc all as specified and directed. |
| 9 | Supply & fix Cable Junction Box of size 130 x 180 x 77, IP 66 (Grey) with integrated membranes / metric knockouts for cable entry of size 2.5 sqmm to 6 sqmm twin core with earth, Lighting Outgoing cable: 2C x 10 Sq.mm cable, Degree of protection: IP66, Material: PC-GFS (polycarbonate) , Weatherproof, resistant to weather influences all as specified and directed. Make : Hensel model No DK 1010 G or equivalent to Havells / ABB India Ltd |
| 10 | Supply & fix Cable Junction Box of size 130 x 130 x 77, IP 66 (Grey) with integrated membranes / metric knockouts for cable entry of size 2.5 sqmm to 6 sqmm twin core with earth, Lighting Outgoing cable: 3C x 1.5/ 2.5 Sq.mm cable, Degree of protection: IP66, Material: PC-GFS (polycarbonate) , Weatherproof, resistant to weather influences all as specified and directed. Make : Hensel model No DK 0606 G or equivalent to Havells / ABB India Ltd |
| 11 | Supply, laying, testing and commissioning of underground LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 2 core x 6 sqmm (laid in terenches,ducts,pole,wall etc.) all as specified and directed. |
| 12 | Supply, laying, testing and commissioning of underground LT XLPE insulated, armoured heavy duty electric aluminium conductor cable 1100 Volts grade of cross section 2 core x 10 sqmm (laid in terenches,ducts,pole,wall etc.) all as specified and directed. |
| 13 | Supply and laying in trenches or in cable ducts or clamping on wall DWC HDPE pipe of size 40 mm (OD) x 32 mm (ID) along with connected accessories like couplers.bends,end caps etc. for LT cable protection all as specified and directed. |
| 14 | Excavation in trenches not exc 1.5 M deep and 1.5 M width and getting out in soft or loose soil for foundation of poles (or) cable laying. |
| 15 | Removing/excavated soil to a distance not exc 50 M and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed. |
| 16 | Returning, filling incl spreading, levelling, watering and well ramming layers not exc 25 M for cable laying. |
| 17 | M&L for Precast cement concrete (PCC) type B1 1:2:4 using 20mm graded aggregate stone for making copings including use and waste of form work complete etc.complete all as specified and directed. |
| 18 | Material and Labour for cutting existing BT / PCCroad of size 45cm x 60cm for taking out/laying of underground cable/pipe and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and as directed . |
| 19 | supply and fixing of out door type Street light timer Panel /Distribution Boards with pole, panel etc as directed alongwith 65A 3 pole/230 Volts contactor and Digital 24 hrs/ Analog Time Switch, 63 A MCB, Manual and Auto Mode Toggle switch cable connectors, cable gland etc including suitable fixing arrangement with existing pole/ panel all as specified and directed. Make: Cat No. TL065AB0 of indoasian Time lite or equivalent. |
| 20 | Supply and fixing Cross Arms, bracings, supports, clamps, eye hook etc structural steel sections including pole clamps stay clamps, D clamps nuts, bolts, washers welding bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed. |
| 21 | M&L for Earthing complete with galvanised earth plate electrode 60 cm x 60 cm x 6.0 mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I, connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. |
| 22 | Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 23 | Taking down existing unserviceable main switches/ distribution boards/Fuse Units of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 24 | Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed. |
| 25 | M&L for Point wiring One light/fan point controlled by one modular switch 5 Amps one way two single core 1.5 sqmm size PVC insulated, unsheathed FRLSH multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLSH multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-Make of wire : V-Marc/ Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.NOTE : (a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. |
| 26 | M&L for Point wiring two light point controlled by one modular switch 5 Amps one way two single core 1.5 sqmm size PVC insulated, unsheathed FRLSH multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLSH multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-Make of wire : V-Marc/ Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.NOTE : (a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. light point controlled by one switch 5 Amps one way complete all as specified and directed. |
| 27 | M&L for Point wiring one modular 3 pin 5 Amp socket out let on independent board two single core 1.5 sqmm size PVC insulated, unsheathed FRLSH multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLSH multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-Make of wire : V-Marc/ Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.NOTE : (a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. light point controlled by one switch 5 Amps one way complete all as specified and directed. |
| 28 | M&L for Point wiring one modular 3 pin 5 Amps socket outlet on same Board two single core 1.5 sqmm size PVC insulated, unsheathed FRLSH multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLSH multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-Make of wire : V-Marc/ Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.NOTE : (a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. light point controlled by one switch 5 Amps one way complete all as specified and directed. complete all as specified and directed. |
| 29 | M&L for Point wiring one bell point controlled by one modular bell push switch 5 Amps one way two single core 1.5 sqmm size PVC insulated, unsheathed FRLSH multistranded copper conductor cable and one single core 1.5 sqmm size green colour PVC insulated FRLSH multistranded copper conductor cable as earth continuity conductor, 1100 volt grade (with proper colour coding Red/Blue/yellow for phase, black for neutral and green for earth) complete drawn through and including PVC casing and caping not less than 25 mm width with all fittings, surface on wall/roof /floor including including sunk pressed steel terminal boxes flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site complete all as specified for the following :-Note :- The unit rate quoted shall deemed to include the cost of following :-Make of wire : V-Marc/ Polycab/ Gloster/ Anchor/ Havells/ Finolex and Make of PVC Conduit or Casing & caping : Modi/ Precision/ Supreme/ Finolex/ Polycab.NOTE : (a) GI metal flush box of minimum thickness of 1.6mm and modular cover plate with frame of any module complete.(b) Proper colour coding is to be followed as per IS specification.(c) Wiring shall be concealed/ on surface with rigid PVC conduit medium grade/PVC casing caping as per site requirement.(d) Cutting chases in wall/floor /beam/ceiling to be concealed conduit and making good the disturbed surfaces. light point controlled by one switch 5 Amps one way complete all as specified and directed. complete all as specified and directed. |
| 30 | All as per item Srl No.25 above, but , point wiring with 4.0 sqmm PVC FRLS insulated multistranded copper conductor suitable for one 3 pin 16 Amps socket out let and one run of 4.0 sqmm cable for earth in green colour on independent board complete all as specified and directed. |
| 31 | S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 32 | S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed. |
| 33 | S & F for switch modular type, 16 Amps 1 module, 230 volts AC circuit complete all as specified and directed. |
| 34 | S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16 Amp , universal complete all as specified and directed. |
| 35 | S & F modular bell push 5 Amps 1 modular 230v, 50Hz AC complete all as specified and directed. |
| 36 | S & F Ceiling rose PVC polycarbonate , isolated body 3 terminals 230 V complete. |
| 37 | Supply & fix in repairs Modular Ac Box With 20A SP MCB \\"C' Type, Metal Enclosure & Unbreakable Heavy Duty With ISI Plug Top, 240 volts AC supply for air conditioner, flush mounting in the wall complete all as specified and directed. Make:- Anchor (Roma) model no 98491 or equivalent to Havells /L&T |
| 38 | S & F of LED slim panel lighting fixture of 18 Watt recess mounted 220V , 50Hz with finished in premium white powder coating ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Luker Cat Part No : LNPR18 or equivalent make in CG/ Philips/ Havells. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting . |
| 39 | All as per sl item No 38 above, but, 15 watt. Make - Luker Cat Part No : LNPR15 or equivalent make in CG/ Philips/ Havells. |
| 40 | S & F and testing LED recessed mounted 595 mm x 595 mm luminarie with high transmitive diffuser of cap 40 watt, with longer life and less maintenance including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: LUKER model No LKM 2240 of any colour (WH/NWH/WW) as reuired or equivalent to Philips/CG/ Havells . NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting |
| 41 | S & F in repairs 30 watts surface mounted LED light fitting , white/yellow colour as reuired as site with slim high perfomanance surfaced mounted LED light fittings, round/square shape as required at site made from die-cast aluminium and CRCA covering, powder coated in white colour complete all as specified and directed. MAKE: Luker model no -LNPSRR30 or equivalent make of Havells/ CG/ Philips |
| 42 | S & F of 18 watts surface mounted LED light fitting , white/yellow colour as reuired as site with slim high perfomanance surfaced mounted LED light fittings, round/square shape as required at site made from die-cast aluminium and CRCA covering, powder coated in white colour complete all as specified and directed. MAKE: Luker Cat No LNPSRR18 N or equivalent make of Havells/ CG/ Philips |
| 43 | S & F and testing LED Tube light fittings aluminium tubes 22 watts 4 feet including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Luker Cat Part No : LT522 or equivalent to CG/Philips Havells |
| 44 | M&L for Sub main wiring complete with four runs (3P+1N) of 10.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 10.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32 mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. |
| 45 | M&L for Sub main wiring complete with four runs (3P+1N) of 6.00 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.00 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32 mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Four runs (3P+1N) of copper conductor, One run of copper conductor as earth wire and one run of PVC conduit shall be measured as one unit length. |
| 46 | M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25 mm wide rigid non-metallic PVC casing and capping and its accessories on surface of wall/ceiling/roof/ floor complete all as specified and as directed. |
| 47 | M&L for Sub main wiring complete with two runs (1P+1N) of 1.5 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 1.5 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25 mm wide rigid non-metallic PVC casing and capping and its accessories on surface of wall/ceiling/roof/ floor complete all as specified and as directed. |
| 48 | M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLSH cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 25 mm wide rigid non-metallic PVC casing and capping and its accessories on surface of wall/ceiling/roof/ floor complete all as specified and as directed.Note for item No 46 to 48 : Two runs of copper conductor (1P+1N) , One run of copper conductor as earth wire and one run of PVC casing and capping shall be measured as one unit length. |
| 49 | S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 6 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. |
| 50 | S & F DB VTPN sheet metal enclosure double door suitable for incoming upto MCCB 100 Amps/125 Amps & outgoing MCB TP / SP (IP-43) Protection Triple pole and neutral 415 V 4 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and directed. |
| 51 | S & F Triple pole and neutral sheet steel powder coated Distribution board IP -43 protection with door earthing for MCBs fitted with 200 Amps rated bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 415 V, 50 Hz supply double door TPN DB system 04 ways,and making good to the distrubed surface /walls. |
| 52 | S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 12 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. |
| 53 | S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 8 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete. |
| 54 | S & F MCCB, 3 pole, 100 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release alongwith copper separator terminals complete all as specified and as directed. |
| 55 | S & F of MCB, TPN, \\"C\\" series, 415 volts, 63 Amps, 10 KA rupturing capacity complete all as specified and as directed. |
| 56 | S & F of MCB, TP, \\"C\\" series, 415 volts, 25-63 Amps, 10 KA rupturing capacity complete all as specified and as directed. |
| 57 | Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed . |
| 58 | Supplying & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed.Note for item No 55.0 to 58- All copper conductors should be connected with MCCB/ MCB alongwith copper reducer terminals of suitable size duly crimpled.” |
| 59 | S & F of SS Enclosure including MCCB 160 to 250 Amps MCCB, 4 pole, 25 KA , 415 V, IK08 and IP30 Protection and with connected fixing accessories with Wall/ panel/ pole etc as specified and directed by Engr In Charge. Make:- L & T model No CM909960000 or equivalent to Havells / Indo Asian |
| 60 | Supply and fixing with wall by suitable size of fastner, wall mounted bus bar chamber 250 A TPN with copper bus bar 4 Nos, IP-42, suitable for incoming and outgoing of UG XLPE Cable of size 25 sqmm 4 core with glands of 3 ph copper wire 10 sqmm all as directed by Engr In Charge.Make :- Indoasian model No Bus Bar Chamber 250 A . Indoasian cat part No -CPPI1019 or equivalent to L&T / Havells |
| 61 | Earthing complete with galvanised earth plate electrode 60 cm x 60cmx 6 mm thick including taking out old earthing , buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level , connected to GI earth wire 4 MM Dia as earthling lead by means bolts and nuts check nuts and washers of galvanized iron and connected to main switch board including watering arrangement with PCC chamber , MS funnel with wire mesh,. CI cover with frame etc including necessary excavation in any type of strata , returning, filling removal of soil outside MD land ,filling of charcoal and salt complete all as shown in electrical plate No. 3 of MES Sch Part I , connected to Earthing test point all as specified and directed on testing on completion. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. |
| 62 | Supply, installation and commissioning of Wall mounted Filterless Autoclean Chimney with Touch & Gesture Control and comprising with following:-Product Dimensions :- 40D x 90W x 51H CentimetersColour- BlackSpecial Feature-Noise Reduction, Auto CleanFinish Type- Powder CoatedAbout this itemType: T- shaped/ Box type, , 6 Way Suction Chimney, Hear Auto clean, Colour: Black, Control: Touch & GestureSuction Capacity: 1250 m3/hr Facia: Front Glass small size ; Body: Corrosion Resistant GI Powder coated (BK)Oil collector: SS (Slim size)Make:- Faber model No (Hood Bonito 3D IND HC SC FL BK 90) or equivalent to Crompton / Elica |
| 63 | Supplya and fixing expendable aluminium duct pipe of dia 6\\" dia suitable for Kitchen Chimney along with 2 x U clamps with screws, 1 x Air Cowl/ Cap all as specified and directed. |
| 64 | Supply & fixing Wall mounting fan 300 mm sweep, incl all fixing arrangement complete all as specified and directed. Make: Usha Model No : 300MM STRIKER HI- SPEED or equivalent to Havells/ CG/ Orient |
| 65 | M & L for Cutting holes into or through brick walls built in cement mortar superficial area exc 400 sqcm but n.exc 0.10 sqm and making good in cement mortor 1:3 or cement concrete 1:2:4 type B1 of required complete all as specified by Engr in charge. |
| 66 | M&L for aluminium composite panel sheet of 3mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwiched by 2.5mm polyethylene core with PVDF coating of 30.0 micron, cut to shape as required and fixed for fixing the exhaust fan/ air ventilation fan on window/ wall all as specified and directed by Engr In Charge. Please Enable Macros to View BoQ information |
