Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | FOR SHIFTING OF 33 KV LINE AND OTHER ASSOCIATED WORKS DUE TO WIDENING OF DHAULANA-PILKHUWA-BHOJPUR ROAD IN DEPOSIT SCHEME, IN THE JURISDICTION OF EDD-PILKHUWA UNDER EDC HAPUR. (All work will be completed as per Sanctioned estimate). |
| 2 | Carriage of all petty material of 03 nos estimate from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 3 | Carriage of all type cable of estimate from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 4 | Carriage of all type conductor of estimate from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 5 | Carriage of ST Pole 13 mtrs. Long fromElectricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 6 | Erection of a 4-pole structure using 13-meter long Steel Tubular (ST) poles, complete with all associated line accessories. Scope of work includes excavation of suitable size pits, providing stone pads, fabrication and rigid fixing of M.S. Top & Dropper Channels, M.S. Angles, and E-Brackets. Installation of 33 kV Pin Insulators with pins, Disc Insulators with matching heavy-duty Disc hardware fittings, and all necessary structure clamping made of M.S. Flat (size 50x6 mm) secured with proper size GI nuts, bolts, and washers. Work includes complete structural alignment, plumbing, high-voltage jumpering, and testing strictly as per standard RESPO drawings, norms, and directions of the Engineer-in-Charge. The rate is comprehensive of all labor, skilled linemen, tools & plants (T&P), lifting machinery/cranes, safety guarding arrangements near existing utilities, handling of local Right of Way (ROW) conditions, and complete site restoration. |
| 7 | Erection of a Double-Pole (DP) structure using 13-meter long Steel Tubular (ST) poles, complete with all associated line accessories for a 33 kV system. Scope of work includes excavation of suitable size pits, providing stone pads, fabrication and rigid fixing of M.S. Top & Dropper Channels, M.S. Angles, and E-Brackets. Installation of 33 kV Pin Insulators with pins, Disc Insulators with matching heavy-duty Disc hardware fittings, and all necessary structure clamping made of M.S. Flat (size 50x6 mm) secured with proper size GI nuts, bolts, and washers. Work includes complete structural alignment, plumbing, high-voltage jumpering, and testing strictly as per standard RESPO drawings, norms, and directions of the Engineer-in-Charge. The rate is comprehensive of all labor, skilled linemen, tools & plants (T&P), lifting machinery/cranes, safety guarding arrangements near existing utilities, handling of local Right of Way (ROW) conditions, and complete site restoration. |
| 8 | Erection of a Tri-Pole (3-pole) structure using 13-meter long Steel Tubular (ST) poles, complete with all associated line accessories for a 33 kV system. Scope of work includes excavation of suitable size pits, providing stone pads, fabrication and rigid fixing of M.S. Top & Dropper Channels, M.S. Angles, and E-Brackets. Installation of 33 kV Pin Insulators with pins, Disc Insulators with matching heavy-duty Disc hardware fittings, and all necessary structure clamping made of M.S. Flat (size 50x6 mm) secured with proper size GI nuts, bolts, and washers. Work includes complete structural alignment, plumbing, high-voltage jumpering, and testing strictly as per standard RESPO drawings, norms, and directions of the Engineer-in-Charge. The rate is comprehensive of all labor, skilled linemen, tools & plants (T&P), lifting machinery/cranes, safety guarding arrangements near existing utilities, handling of local Right of Way (ROW) conditions, and complete site restoration. |
| 9 | Erection and Fixing of 13-meter long Steel Tubular (ST) poles for a 33 kV overhead line, after manual or mechanical digging of pits of suitable dimensions in all types of soil including black cotton or rocky strata. Scope of work includes providing, fabricating, and fixing of F-Brackets made of M.S. Flat (size 50x6 mm), and heavy-duty pole holding clamps made of M.S. Flat (size 50x6 mm), complete with all necessary galvanized (GI) nuts, bolts, and washers. The work covers proper alignment, leveling, structural support setup, and installation of all requisite line accessories strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. The rate is inclusive of all skilled/unskilled labor, specialized tools & plants (T&P), pulling/lifting machinery or cranes, safety arrangements near running utilities, and complete site restoration. |
| 10 | Laying, paying out, stringing, and final sagging of ACSR Dog conductor over existing or newly erected overhead line supports, complete in all respects. Scope of work includes proper tensioning using come-along clamps, dynamometers, or specialized stringing equipment, followed by precision alignment, dressing, binding, and jumpering at cut-points strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. The rate is fully inclusive of all skilled linemen, labor, specialized tools & plants (T&P), aerial rollers, tensioning machines, safety arrangements/guarding under or near running power utilities, and handling of local site conditions. |
| 11 | Grouting, and fixing of stay rod assemblies (size 20X1,800), including all associated civil and mechanical works. Scope covers manual excavation of stay pits, casting of cement concrete block foundation of size 0.60 X 0.60 X 0.30 m using a nominal mix ratio of 1:4:8 (1 Cement : 4 Fine Sand : 8 graded 40 mm Brick Ballast), complete with anchor plates. Work includes safe backfilling of earth in layers, proper watering, and mechanical ramming. Mechanical execution includes the stringing, plumbing, precise tensioning, and standard nozzling/binding of the stay wire to the stay rod and the line pole. The contractor shall provide all required grouting raw materials, specialized stay clamps fabricated from M.S. Flat (50 X 6 mm), matching high-tensile GI nuts, bolts, and stay loops strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. |
| 12 | Earthing for line supports using an M.S. Earth Rod (size 20 x 2,540 mm), complete in all respects. Scope of work includes manual excavation of earth pits in all types of soil strata, driving the M.S. Rod vertically into the ground at a mandatory distance of 3.0 meters away from the line support, and ensuring the top of the electrode rests at a minimum depth of 0.5 meters below the finished ground level. Work includes establishing a secure electrical connection from the base of the support to the earth electrode below ground level using standard galvanized G.I. wire, heavy-duty earthing lugs, and proper size galvanized nuts, bolts, and washers. All operations must ensure robust continuity and acceptable earth resistance values strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. The rate is inclusive of all civil excavation, backfilling, ramming, material supply (lugs, G.I. wire, and hardware), tools & plants (T&P), and testing.. |
| 13 | Grouting and foundation casting of Steel Tubular (ST) or PCC line supports using a dual-stage Cement Concrete (CC) process, complete in all respects. Scope of work includes structural embedding below ground level in a foundation block of size 450 X 450 mm extending vertically down to exactly 1/6th depth of the full length of the support, cast using a nominal mix ratio of 1:4:8 (1 Cement : 4 Fine Sand : 8 graded 40 mm Brick Ballast) up to the natural ground level. The above-ground portion shall feature a 300 mm high protective plinth (muffing) cast using a richer mix ratio of 1:3:6 (1 Cement : 3 Coarse Sand : 6 Stone Grit), finished with smooth outward tapering as per approved departmental drawings. The rate is composite and fully inclusive of the supply of all civil construction raw materials (cement, sand, ballast, stone grit), manual or mechanical excavation, formwork/shuttering, layered earth backfilling, proper water ramming, structural curing, specialized tools & plants (T&P), and complete site restoration under the direction of the Site In-charge. |
| 14 | Providing and Trenchless laying of UV-stabilized High-Density Polyethylene (HDPE) pipes for underground cable routing using Horizontal Directional Drilling (HDD) methodology. The scope covers the supply and jointing of 140 mm Inner Diameter / 160 mm Outer Diameter, PN-4, PE-80 grade HDPE pipes conforming strictly to relevant Indian Standards (IS), supplied in standard 6-meter lengths. The installation requires a double-circuit configuration (310 x 2 = 620 meters total pipe laying) executed via trenchless tech without disrupting the surface topography or existing pavement. The rate is composite and fully inclusive of the cost of the HDPE pipes, jointing couplers/materials, HDD machinery deployment, pilot hole drilling, reaming, pipe pulling, entry/exit pit excavations, electronic tracking, handling of subterranean obstacles, utilities protection, and complete site restoration as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. |
| 15 | Laying and pulling of 33kV, 3 x 300 sq.mm. Cross-Linked Polyethylene (XLPE) insulated, armored aluminum power cable through pre-laid underground HDPE pipes/ducts for a double-circuit configuration (820x 2 = 1,640 meters total cable laying). Scope of work includes safe handling, unloading, and mounting of cable drums on heavy-duty jacks, controlled paying out using cable rollers/winches to prevent insulation damage, and smooth pulling through the ducts. A mandatory extra length of spare cable shall be systematically left in standard loop/omega shapes at both ends (terminal poles, RMUs, or substation bays) to facilitate future jointing and terminations. The work includes proper dressing, clamping, numbering/tagging with aluminum markers, and testing (including insulation resistance and Hipot testing where required) strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. The rate is inclusive of all specialized labor, cable pulling machinery, lubricants/grease, safety arrangements, and T&P. |
| 16 | Providing, fabricating, and fixing of 6-inch nominal diameter, Class-B Galvanized Iron (G.I.) protection pipes over vertical runs of 33kV, 3 X 300 sq.mm XLPE power cables and LT XLPE cables at Double-Pole (DP) terminal structures. Scope of work includes manual excavation to bury the lower end of the G.I. pipe to a minimum depth of 500 mm below ground level to ensure robust mechanical protection against external impacts. The pipe shall be rigidly clamped onto the DP structure using custom-fabricated heavy-duty M.S. clamps, nuts, and bolts. After cable pulling and mounting, both the top and bottom ends of the G.I. pipe must be securely sealed using high-grade, weatherproof bitumastic compound or polyurethane foam sealant to prevent water ingress and silt accumulation. The rate is composite and fully inclusive of the supply of the Class-B G.I. pipe, custom clamps, structural hardware, sealing compounds, specialized tools & plants (T&P), line terminal connections, and complete site restoration under the directions of the Site In-charge. |
| 17 | Making and filling of $33\text{ kV}$ Straight-Through / Heat-Shrinkable Outdoor Terminations Jointing Kit suitable for a $3 \times 300\text{ mm}^2$ XLPE insulated, armored aluminum power cable. Scope of work includes precise cable preparation by skilled cable jointers, removing outer/inner sheaths, stripping armor, insulation dressing, semi-conducting layer removal, and thorough cleaning. Mechanical execution includes the plumbing, wrapping of high-dielectric/stress-control tapes, and installing heat-shrinkable sleeves using a controlled gas torch setup. The contractor shall provide, fix, and crimp heavy-duty, long-barrel aluminum terminal lugs of matching premium quality using specialized hydraulic crimping tools. The rate is composite and fully inclusive of the cost of the complete jointing kit, premium tapes, mastic sealants, tinned-copper earth braids, mechanical lugs, specialized tools & plants (T&P), testing, and skilled labor strictly as per standard RESPO norms and directions of the Site In-charge. |
| 18 | Providing, fabricating, and fixing of standard vitreous enameled Danger Boards (conforming to relevant Indian Standards / DISCOM specifications), complete in all respects. The scope of work includes the supply of the danger notice plate featuring the standard skull and crossbones symbol, along with warning inscriptions in Hindi, English, and the local language. The plate shall be rigidly mounted onto line supports, double-pole structures, or fencing using custom-fabricated clamping arrangements made of M.S. Flat, complete with galvanized (GI) anti-theft bolts, nuts, and washers to prevent unauthorized removal. The rate is composite and fully inclusive of the cost of the danger board, customized mounting clamps, high-tensile hardware, skilled labor, tools & plants (T&P), and all allied works strictly as per standard RESPO drawings, safety regulations, and directions of the Site In-charge. |
| 19 | Providing, fabricating, and fixing of standard vitreous enameled phase/structure Number Plates (conforming to relevant Indian Standards / DISCOM specifications), complete in all respects. The scope of work includes the supply of heavy-gauge MS plates pre-enameled with high-visibility alphanumeric line identifications, circuit markings, and structure sequence data. The plates shall be rigidly mounted onto line supports, single/double-pole structures, or distribution kiosks using custom-fabricated clamping arrangements made of M.S. Flat, complete with galvanized (GI) anti-theft bolts, nuts, and washers to prevent unauthorized removal or loose vibration. The rate is composite and fully inclusive of the cost of the number plate, customized mounting clamps, high-tensile hardware, skilled labor, tools & plants (T&P), and all allied works strictly as per standard RESPO drawings, safety regulations, and directions of the Site In-charge. |
| 20 | Providing and applying two comprehensive coats of anti-corrosive Red Oxide Primer paint of ISI-certified make over 13-meter long Steel Tubular (ST) line supports/structures, complete in all respects. The scope of work includes thorough mechanical surface preparation of the poles to remove all mill scale, rust, dust, grease, and moisture using wire brushes, emery paper, or steel scrapers before paint application. The contractor shall supply all painting materials, including premium-quality ISI-marked red oxide primer, thinners, high-grade brushes, and emery paper. The application must achieve a uniform, streak-free dry film thickness across the entire exposed surface area of the pole strictly as per standard RESPO drawings, industrial painting norms, and directions of the Site In-charge. The rate is composite and fully inclusive of all premium primer materials, wire brushing/cleaning labor, scaffolding, safety belts/harnesses for working at heights, specialized tools & plants (T&P), and cleanup. |
| 21 | Providing and applying two comprehensive coats of high-grade, weather-resistant Aluminum Paint of ISI-certified make over 13-meter long Steel Tubular (ST) line supports/structures, complete in all respects. The scope of work includes thorough mechanical surface preparation (or secondary cleaning over the anti-corrosive primer coat) to remove all dust, moisture, grease, or contaminants using fine emery paper, wire brushes, and dry cloths before paint application. The contractor shall supply all painting materials, including premium-quality, high-gloss ISI-marked aluminum paint (dual-pack paste and medium mix or pre-mixed as specified), thinners, high-grade rollers/brushes, and consumables. The application must achieve a uniform, streak-free, bright metallic finish with optimum dry film thickness across the entire exposed surface area of the pole strictly as per standard RESPO drawings, industrial painting norms, and directions of the Site In-charge. The rate is composite and fully inclusive of all premium aluminum paint materials, surface cleaning labor, scaffolding, safety belts/harnesses for working at heights, specialized tools & plants (T&P), and cleanup. |
| 22 | Providing, fabricating, and wrapping of galvanized (GI) Barbed Wire anti-climbing guards around line supports, complete in all respects. The scope of work includes the supply of high-tensile, heavily galvanized barbed wire conforming to relevant Indian Standards (IS:278). The wire shall be tightly and uniformly wrapped/wound around the steel tubular or PCC poles starting at a height of 2.5 meters above the ground level up to a vertical span of 1.0 meter (or as per approved drawing) to prevent unauthorized climbing. The contractor shall provide all custom-fabricated MS clamping arrangements, fixing materials, binding wires, and high-tensile galvanized nuts and bolts to rigidly secure the ends of the barbed wire matrix. The rate is composite and fully inclusive of the cost of the GI barbed wire, anti-theft hardware accessories, skilled labor, safety gear for handling sharp materials, tools & plants (T&P), and all allied works strictly as per standard RESPO drawings, safety regulations, and directions of the Site In-charge. |
| 23 | Providing and placing of heavy-duty, cured Stone Pads (300 X 300 X 75 mm or cast cement concrete blocks of equivalent dimensions) at the base of excavated support pits, complete in all respects. The scope of work includes proper leveling, ramming, and consolidation of the pit bottom bed prior to positioning the stone pad. The pad must be precisely centered to act as a solid, load-bearing base plate directly beneath the bottom of Steel Tubular (ST) or Pre-stressed Concrete (PCC) poles. This structure is designed to uniformly distribute the vertical downward thrust of the dead-weight of the support assembly and prevent the pole from sinking into soft, loose, or waterlogged strata. The rate is composite and fully inclusive of the supply of the stone pad/base block, transit to the site, manual handling, precision alignment, tools & plants (T&P), and all associated labor works strictly as per standard RESPO drawings, departmental construction norms, and directions of the Site In-charge. |
| 24 | Providing, and rigidly fixing of heavy-duty MS \\"F-Brackets\\" (forming part of the line cross-arm assembly) suitable for 33 kV overhead lines, complete in all respects. The scope of work includes sourcing high-grade Structural Steel Channels/Angles conforming to relevant Indian Standards (IS:2062), precision cutting, welding, and drilling as per approved structural layouts, followed by a mandatory dual coat of anti-corrosive primer or hot-dip galvanization to resist atmospheric weathering. The contractor shall supply all necessary mounting hardware, including high-tensile Galvanized Iron (GI) nuts, bolts, matching spring washers, and backing plates. Execution covers hoisting the assembly to the designated cross-arm level on the 33 kV supports, structural alignment, and firm tightening to securely hold pin or disc insulator configurations strictly as per standard RESPO drawings, departmental distribution norms, and directions of the Site In-charge. The rate is composite and fully inclusive of material cost, fabrication, safety harnesses for working at heights, tools & plants (T&P), and specialized skilled labor. |
| 25 | Providing, executing, and fixing of heavy-duty Parallel Groove (PG) Clamps suitable for 33 kV overhead lines, complete in all respects. The scope of work includes sourcing high-conductivity aluminum alloy or bimetallic PG clamps designed to securely connect parallel jumpers or tap-offs with overhead conductors (such as ACSR Dog, Panther, or Wolf). The assembly shall feature a dual or triple bolted configuration complete with hot-dip galvanized or stainless-steel high-tensile bolts, nuts, and spring washers to ensure uniform gripping pressure, minimize contact resistance, and prevent electrical discharge/sparking. The contractor is responsible for proper surface cleaning of the conductors using scratch brushes and applying high-grade jointing oxide inhibiting compound before mechanical crimping/tightening. The rate is composite and fully inclusive of the cost of the PG clamps, corrosion-proof fastening hardware, contact grease, specialized tools & plants (T&P), safety harnesses for line works at heights, and skilled electrical labor deployed strictly as per standard RESPO drawings, DISCOM engineering practices, and directions of the Site In-charge. |
| 26 | providing, and rigidly fixing of heavy-duty MS \\"E-Brackets\\" (forming part of the line cross-arm assembly) suitable for overhead lines, complete in all respects. The scope of work includes sourcing high-grade Structural Steel Channels/Angles conforming to relevant Indian Standards (IS:2062), precision cutting, welding, and drilling as per approved structural layouts, followed by a mandatory dual coat of anti-corrosive primer or hot-dip galvanization to resist atmospheric weathering. The contractor shall supply all necessary mounting hardware, including high-tensile Galvanized Iron (GI) nuts, bolts, matching spring washers, and backing plates. Execution covers hoisting the assembly to the designated level on the line supports, structural alignment, and firm tightening to securely hold insulator configurations strictly as per standard RESPO drawings, departmental distribution norms, and directions of the Site In-charge. The rate is composite and fully inclusive of material cost, fabrication, safety harnesses for working at heights, tools & plants (T&P), and specialized skilled labor. |
| 27 | Providing, fabricating, and rigidly fixing of heavy-duty M.S. Holding Clamps (including pole-top clamps, cross-arm backing clamps, or cable-holding arrangements) suitable for electrical line supports, complete in all respects. The scope of work includes sourcing high-grade structural mild steel flats/plates conforming to relevant Indian Standards (IS:2062), precision cutting, cold/hot bending to perfectly match the outer diameter or profile of Steel Tubular (ST) or PCC poles, and necessary drilling. The clamps must be treated with a mandatory dual coat of anti-corrosive red oxide primer or hot-dip galvanized to resist atmospheric corrosion. The contractor shall supply all necessary high-tensile Galvanized Iron (GI) nuts, bolts, spring washers, and backing plates. Execution covers lifting the assemblies to their designated positions on the poles, alignment, and firm torque-tightening to ensure completely slip-free structural holding strictly as per standard RESPO drawings, departmental distribution norms, and directions of the Site In-charge. The rate is composite and fully inclusive of material supply, fabrication, scaffolding/ladder deployment, safety harnesses for working at heights, tools & plants (T&P), and specialized skilled labor. |
| 28 | Providing and fixing of standard high-tensile, hot-dip Galvanized Iron (GI) or Mild Steel (MS) Nuts and Bolts of nominal size 4-sut ($\frac{1}{2}$ inch / 12 mm diameter) and 4 inches (100 mm) in length, complete with matching heavy-duty flat washers and spring washers. The scope of work includes sourcing premium quality hardware conforming to relevant Indian Standards (IS:1363 / IS:1367) capable of withstanding the dynamic mechanical stresses of overhead power distribution lines. The hardware is to be utilized for rigidly securing structural steel components such as cross-arms, brackets, and clamps onto line supports. Execution covers precise alignment through pre-drilled holes, manual/mechanical torque tightening, and ensuring adequate thread protrusion past the nut assembly strictly as per standard RESPO drawings, departmental construction norms, and directions of the Site In-charge. The rate is composite and fully inclusive of the cost of nuts, bolts, twin washers, transit, safety harnesses for working at heights, tools & plants (T&P), and all associated labor. |
| 29 | Providing, fabricating, stringing, and rigidly fixing of cradle/box guarding under 33 kV overhead power lines using Galvanized Iron (G.I.) wire of specified gauge (4 SWG, 6 SWG, or 8 SWG), complete in all respects. The scope of work includes the layout and erection of structural guarding frameworks at all mandatory cross-over points such as public road crossings, telecommunication line crossings, and residential corridors. The work includes fabricating and mounting specialized guarding cross-arms/lacings on line supports, uncoiling, straightening, paying out, tensioning, and robust binding/clamping of the longitudinal and lacing wires to form a secure protective mesh. The entire guarding matrix must be effectively connected to the support earthing system to ensure instant tripping of the feeder in the event of line conductor snapping. The rate is composite and fully inclusive of the contractor-supplied G.I. wire (4/6/8 SWG), structural lacing materials, fasteners, specialized wire stretchers, tools & plants (T&P), safety arrangements/guarding while working under running utilities, and skilled labor deployed strictly as per standard RESPO drawings, Indian Electricity Rules, and directions of the Site In-charge. |
| 30 | Dismantling of existing 33 kV overhead line networks, safely lowering old and used line conductors (ACSR Dog, Panther, or Wolf), and completely clearing associated line hardware, cross-arms, and insulators from existing structures. The scope of work includes controlled un-stringing, untying from insulators, mechanical winding/reeling, and secure bundling of the old conductor to prevent kinking or damage. The contractor shall arrange for the safe handling and carriage of all retrieved departmental materials from the work site to the designated Junior Engineer (JE) Store / Electricity Store Center (ESC) at Hapur. The rate is composite and fully inclusive of specialized labor for working on live/de-energized lines, rigging equipment, safety permits (shut-down coordination), loading at the work site, transit via a mix of unpaved (Kachha) and paved (Pakka) roads over the entire lead distance, and unloading and structured stack-piling at the ESC-Hapur yard strictly as per standard UPPCL disposal guidelines and directions of the Site In-charge. |
| 31 | Dismantling of existing 33 kV overhead line network structures consisting of 155 Numbers of 13-Meter Steel Tubular Poles (STP), including the complete opening, unbolting, and removal of all line accessories, cross-arms, top-hampers, brackets, clamps, and insulators. The scope of work includes the safe lowering, sorting, and classification of retrieved materials into designated scrap categories, specifically 271.25 Quintals of ST Pole Scrap and 16.00 Quintals of Meltable Iron/Steel Scrap. The contractor shall arrange for the safe handling, loading at the work site, carriage/transit via a combination of unpaved (Kachha) and paved (Pakka) roads over the entire lead distance, and systematic unloading and structured stack-piling of the entire logged inventory at the designated Junior Engineer (JE) Store / Electricity Store Center (ESC) at Hapur, strictly as per standard UPPCL asset disposal guidelines and directions of the Site In-charge. The rate is composite and fully inclusive of specialized rigging, specialized labor for working on de-energized structures, safety gear, motorized transit, and material reconciliation. |
| 32 | Carrying out pre-commissioning checks, jumpering, and complete line energization of the newly erected 33 kV overhead line and underground cable system, complete in all respects. The scope of work includes executing heavy-duty jumper connections at terminal poles, double-pole (DP) structures, cut-points, and isolation switches using proper PG clamps, bimetallic connectors, or crimped aluminum lugs as per layout requirements. It includes conducting mandatory pre-energization safety and technical tests—including insulation resistance (Megger) profiling, phase-sequence verification, continuity mapping, and high-voltage (Hipot) testing where applicable. The contractor shall coordinate with the grid substation staff, manage formal permit-to-work (PTW) closures, safely remove temporary lines/earthing sets, and sequentially energize the system under live conditions. The rate is inclusive of specialized testing instruments, safety gear, line-clearance tools, liaison assistance, and highly skilled electrical labor deployed strictly as per standard RESPO/CEA norms, distribution engineering safety manuals, and directions of the Site In-charge. |
| 33 | Lopping, trimming, or complete cutting of tree branches/trees obstructing the right-of-way (ROW) or clearance corridor of 33 kV overhead power lines, complete in all respects. The scope of work includes identifying and clearing all overhanging limbs, dense foliage, or hazardous trees that infringe upon the statutory safety clearances prescribed by grid distribution standards. The contractor shall arrange for all necessary tools and safety gear, including mechanized chain saws, heavy-duty ropes, ladders, axes, and safety helmets/harnesses for working at heights. The execution covers the controlled lowering of heavy branches to prevent damage to existing overhead conductors, poles, or surrounding public/private property, followed by the systematic clearing, bundling, and disposal of the cut wood and debris away from the line corridor. The rate is composite and fully inclusive of specialized labor, tools & plants (T&P), local authority coordination/liaison where required, hazard management, and site clearance strictly as per standard RESPO safety norms and directions of the Site In-charge. |
| 34 | FOR SHIFTING OF 11KV AND OTHER ASSOCIATED WORKS DUE TO WIDENING OF DHAULANA-PILKHUWA-BHOJPUR ROAD IN DEPOSIT SCHEME, IN THE JURISDICTION OF EDD-PILKHUWA UNDER EDC HAPUR. (All work will be completed as per Sanctioned estimate). |
| 35 | Carriage of all petty material of 06 estimate from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 36 | Carriage of all type Conductor of estimate from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 37 | Carriage of all type Cable of estimate from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 38 | Carriage of PCC Pole 11 mtrs. Long from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 39 | Carriage of PCC Pole 8.5 mtrs. Long from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 40 | Erection of a Double-Pole (DP) structure using 11-meter long PCC poles, complete with all associated line accessories for a 11 kV system. Scope of work includes excavation of suitable size pits, providing stone pads, fabrication and rigid fixing of M.S. Top & Dropper Channels, M.S. Angles, and E-Brackets. Installation of 11 kV Pin Insulators with pins, Disc Insulators with matching heavy-duty Disc hardware fittings, and all necessary structure clamping made of M.S. Flat (size 50x6 mm) secured with proper size GI nuts, bolts, and washers. Work includes complete structural alignment, plumbing, high-voltage jumpering, and testing strictly as per standard RESPO drawings, norms, and directions of the Engineer-in-Charge. The rate is comprehensive of all labor, skilled linemen, tools & plants (T&P), lifting machinery/cranes, safety guarding arrangements near existing utilities, handling of local Right of Way (ROW) conditions, and complete site restoration. |
| 41 | Erection of a 4-pole structure using 11-meter long PCC poles, complete with all associated line accessories. Scope of work includes excavation of suitable size pits, providing stone pads, fabrication and rigid fixing of M.S. Top & Dropper Channels, M.S. Angles, and E-Brackets. Installation of 11 kV Pin Insulators with pins, Disc Insulators with matching heavy-duty Disc hardware fittings, and all necessary structure clamping made of M.S. Flat (size 50x6 mm) secured with proper size GI nuts, bolts, and washers. Work includes complete structural alignment, plumbing, high-voltage jumpering, and testing strictly as per standard RESPO drawings, norms, and directions of the Engineer-in-Charge. The rate is comprehensive of all labor, skilled linemen, tools & plants (T&P), lifting machinery/cranes, safety guarding arrangements near existing utilities, handling of local Right of Way (ROW) conditions, and complete site restoration. |
| 42 | Erection and Fixing of 8.5-meter long PCC poles for a 11 kV overhead line, after manual or mechanical digging of pits of suitable dimensions in all types of soil including black cotton or rocky strata. Scope of work includes providing, fabricating, and fixing of F-Brackets made of M.S. Flat (size 50x6 mm), and heavy-duty pole holding clamps made of M.S. Flat (size 50x6 mm), complete with all necessary galvanized (GI) nuts, bolts, and washers. The work covers proper alignment, leveling, structural support setup, and installation of all requisite line accessories strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. The rate is inclusive of all skilled/unskilled labor, specialized tools & plants (T&P), pulling/lifting machinery or cranes, safety arrangements near running utilities, and complete site restoration. |
| 43 | Erection and Fixing of 11-meter long PCC poles for a 11 kV overhead line, after manual or mechanical digging of pits of suitable dimensions in all types of soil including black cotton or rocky strata. Scope of work includes providing, fabricating, and fixing of F-Brackets made of M.S. Flat (size 50x6 mm), and heavy-duty pole holding clamps made of M.S. Flat (size 50x6 mm), complete with all necessary galvanized (GI) nuts, bolts, and washers. The work covers proper alignment, leveling, structural support setup, and installation of all requisite line accessories strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. The rate is inclusive of all skilled/unskilled labor, specialized tools & plants (T&P), pulling/lifting machinery or cranes, safety arrangements near running utilities, and complete site restoration. |
| 44 | Construction of Transformer Plinth for 250 KVA Distribution Transformer (Size: 2.0 m × 2.0 m × 1.5 m Height): Providing all labour, materials, machinery, T&P, transportation and other incidental charges for construction of transformer plinth suitable for installation of 250 KVA Distribution Transformer as per approved drawing and direction of Engineer-in-Charge, including excavation in all types of soil, dressing and leveling of foundation, providing and laying PCC in foundation in ratio 1:4:8 (1 Cement : 4 Sand : 8 Brick Ballast), first class brick masonry in cement mortar 1:4 (1 Cement : 4 Fine Sand) in side walls, filling inside the plinth with approved brick ballast in layers, watering and proper ramming/compaction, and providing and laying RCC slab/top in ratio 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Aggregate) including centering, shuttering, curing and finishing complete. The item shall also include dewatering, scaffolding, barricading, safety arrangements, protection of existing utilities, disposal of surplus excavated earth, site clearance, testing, curing, watch and ward, and all T&P required for satisfactory completion of the work. The work shall be executed within available ROW conditions, including obtaining necessary permissions, maintaining uninterrupted traffic and pedestrian movement, providing warning signs and safety measures, and working under restricted site conditions without any extra cost. The rate shall be inclusive of all materials, labour, loading, unloading, carriage, taxes, duties, royalties, insurance, overheads and contractor’s profit, complete in all respects as per specifications and directions of the Engineer-in-Charge. |
| 45 | Safely shifting, handling, and re-installing an existing 250 kVA, 11/0.4 kV outdoor-type Distribution Transformer from its a newly constructed concrete plinth within the site premises, complete in all respects. The scope of work includes isolating the system, coordinating formal line shutdowns, and disconnecting all associated HT/LT cable terminations, overhead jumpers, neutral earthing strips, and structural grounding bonds. The contractor shall deploy appropriate mechanical handling equipment—including a mobile crane/hydra (minimum 12-Ton capacity), pulling winches, heavy-duty jacks, and steel roller channels—to carefully lift, maneuver, and skid the transformer assembly without causing any impact, structural distortion, or vibration to the transformer tank, radiator fins, HT/LT porcelain bushings, or conservator tank. Execution covers the precise placement, leveling, and centering of the 250 kVA transformer on the new plinth channels, anchoring it securely using standard dynamic locking bolts, re-terminating all HT/LT connections, and reconstructing body and neutral earthing connections using matching MS/GI flats. The rate is composite and fully inclusive of specialized rigging tools & plants (T&P), crane/machinery charges, fuel, skilled electrical labor, safety gear, pre-commissioning insulation tests, and cleaning up the site corridor strictly as per standard RESPO drawings, UPPCL distribution guidelines, and directions of the Site In-charge. |
| 46 | Construction of MS Safety Fencing for 11/0.4 KV Distribution Transformer Substation (Size: 3.0 m × 3.0 m × 2.0 m Height): Providing, fabricating, supplying and erecting MS safety fencing around 11/0.4 KV Distribution Transformer Substation of size 3.0 m × 3.0 m × 2.0 m height, complete in all respects as per approved drawing and direction of Engineer-in-Charge, including supply of all materials, labour, tools & plants (T&P), transportation, loading, unloading and all incidental charges. The work shall include providing and fixing vertical posts made of MS Angle 65×65×6 mm, duly embedded and grouted in cement concrete of ratio 1:4:8 (1 Cement : 4 Sand : 8 Brick Ballast/Coarse Aggregate) with adequate depth below ground level, providing and fixing horizontal members/rails of suitable MS Angle/T-Iron, fixing MS wire mesh of approved gauge and size to the framework, providing and fixing pickets/bracings wherever required for structural stability, and fabrication, supply and installation of suitable lockable MS gate for entry and exit, including all hinges, locking arrangements, clamps, nuts, bolts, washers and welding consumables. The complete fencing structure shall be properly aligned, erected, welded, ground-finished and painted with one coat of red oxide primer and two coats of approved synthetic enamel paint, including surface preparation, cleaning and rust removal. The item shall also include excavation, concrete foundation, curing, dewatering (if required), scaffolding, barricading, site clearance, disposal of surplus earth and debris, testing, safety arrangements, protection of existing utilities and public property, watch and ward, and all T&P required for satisfactory completion of the work. The work shall be executed under prevailing site and Right of Way (ROW) conditions, including restricted working space, movement of traffic and pedestrians, and proximity to existing electrical installations, without any extra cost. The contractor shall obtain necessary permissions wherever required, maintain uninterrupted public movement, provide safety barricades, caution boards, warning lights and all statutory safety measures during execution. The rate shall be inclusive of all materials, fabrication, galvanizing/painting (where specified), labour, T&P, carriage, loading, unloading, taxes, duties, royalties, insurance, overheads, contractor’s profit and all other expenses required to complete the work in accordance with specifications and directions of the Engineer-in-Charge. Measurement shall be made for completed work and payment shall be made at the accepted contract rate only. |
| 47 | Laying, Stringing and Final Sagging of 11 KV XLPE Cable 3C x 185 Sq.mm: Providing all labour, T&P, cable laying equipment, transportation and incidental charges for laying, stringing, dressing and final sagging of 11 KV XLPE Cable 3C x 185 Sq.mm, including handling of cable drums, cable pulling through trench/duct, alignment, fixing, protection of cable, safety arrangements, barricading, site clearance and all associated works complete as per RESPO norms, approved drawings and directions of Engineer-in-Charge. The rate shall be inclusive of all labour, T&P, ROW constraints, traffic management, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 48 | Laying, Stringing and Final Sagging of ACSR Dog Conductor: Providing all labour, T&P, stringing equipment, transportation and incidental charges for laying, stringing, tensioning and final sagging of ACSR Dog Conductor on overhead line, including handling of conductor drums, installation of running blocks, paying out, tensioning, clipping, jointing assistance, proper sagging as per approved sag chart, and all associated works complete as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, T&P, safety arrangements, barricading, ROW constraints, traffic management, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 49 | Laying, Stringing and Final Sagging of ACSR Weasel Conductor: Providing all labour, T&P, stringing equipment, transportation and incidental charges for laying, stringing, tensioning and final sagging of ACSR Weasel Conductor on overhead line, including handling of conductor drums, installation of running blocks, paying out, tensioning, clipping, jointing assistance, maintaining statutory clearances, proper sagging as per approved sag chart, and all associated works complete as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, T&P, safety arrangements, barricading, ROW constraints, traffic management, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 50 | Laying, Stringing and Final Sagging of ACSR Rabbit Conductor: Providing all labour, T&P, stringing equipment, transportation and incidental charges for laying, stringing, tensioning and final sagging of ACSR Rabbit Conductor on overhead line, including handling of conductor drums, installation of running blocks, paying out, tensioning, clipping, jointing assistance, maintaining statutory clearances, proper sagging as per approved sag chart, and all associated works complete as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, T&P, safety arrangements, barricading, ROW constraints, traffic management, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 51 | Laying, Stringing and Final Sagging of LT AB Cable 3×120 + 1×95 + 1×16 Sq.mm: Providing all labour, T&P, stringing equipment, transportation and incidental charges for laying, stringing, tensioning and final sagging of LT AB Cable 3×120 + 1×95 + 1×16 Sq.mm, including handling of cable drums, installation of suspension and dead-end hardware, paying out, tensioning, fixing, clipping, maintaining statutory clearances, proper sagging as per approved standards, and all associated works complete as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, T&P, safety arrangements, barricading, ROW constraints, traffic management, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 52 | Grouting and Fixing of Stay Set with 20 mm × 1800 mm Stay Rod: Providing all labour, materials, T&P, transportation and incidental charges for excavation, grouting and fixing of stay rod of size 20 mm × 1800 mm complete with cement concrete foundation of size 0.60 m × 0.60 m × 0.30 m in ratio 1:4:8 (1 Cement : 4 Sand : 8 Brick Ballast/40 mm Aggregate), including excavation in all types of soil, placement of stay rod, backfilling, watering and proper ramming, fixing and tightening of stay wire with pole to the required tension, and providing and fixing stay clamp made of MS Flat 50 mm × 6 mm complete with nuts, bolts, washers, loops and all accessories as per RESPO drawings/norms and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, T&P, safety arrangements, barricading, ROW constraints, disposal of surplus earth, taxes, duties, overheads and contractor’s profit, complete in all respects. |
| 53 | Earthing of Supports with MS Earth Rod (20 mm × 2540 mm): Providing all labour, materials, T&P, transportation and incidental charges for earthing of supports using MS Earth Rod of size 20 mm × 2540 mm, including excavation of pit in all types of soil, driving and fixing of MS earth rod at a minimum distance of 3.0 m from the support and 0.5 m below ground level, connecting the support to the earth electrode with suitable size GI wire and earthing lugs, including supply and fixing of nuts, bolts, washers and all associated accessories complete as per RESPO drawings/norms and directions of the Engineer-in-Charge. The item shall include backfilling, watering, proper compaction, safety arrangements, barricading, disposal of surplus earth and all associated works. The rate shall be inclusive of all labour, materials, T&P, ROW constraints, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 54 | Grouting of PCC Supports: Providing all labour, materials, T&P, transportation and incidental charges for grouting of PCC supports in cement concrete of ratio 1:4:8 (1 Cement : 4 Sand : 8 Brick Ballast/40 mm Aggregate) in foundation block of size 450 mm × 450 mm and depth equal to 1/6th of the full length of the support below ground level, including construction of 300 mm high plinth above ground level in cement concrete ratio 1:3:6 (1 Cement : 3 Coarse Sand : 6 Stone Grit) with proper mufting, excavation in all types of soil, positioning and alignment of support, backfilling, watering, compaction and proper ramming complete as per approved drawings, RESPO norms and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, materials, T&P, safety arrangements, barricading, ROW constraints, disposal of surplus earth, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 55 | Providing and Fixing of 6\\" Dia Class-B GI Pipe for Cable Protection on Double Pole Structure: Providing all labour, materials, T&P, transportation and incidental charges for supplying and fixing 6\\" dia Class-B GI pipe for mechanical protection of 33 KV 3C × 300 Sq.mm XLPE Cable and LT XLPE Cable on double pole structure, including excavation, positioning and fixing of GI pipe, burying one end of the pipe at least 500 mm below ground level, sealing of top and bottom ends to prevent ingress of water, dust and foreign materials, providing and fixing suitable clamps, nuts, bolts and supporting arrangements, mounting and clamping of cable on the double pole structure, dressing and securing of cable, and making necessary cable-to-overhead line connections at both ends complete as per approved drawings, RESPO norms and directions of the Engineer-in-Charge. The item shall also include backfilling, proper compaction, safety arrangements, barricading, ROW constraints, protection of existing utilities and all associated works required for satisfactory completion of the job. The rate shall be inclusive of all labour, materials, T&P, taxes, duties, overheads, contractor's profit and all incidental expenses, complete in all respects. |
| 56 | Making and Filling of 11 KV Cable Jointing Kit for 3C × 185 Sq.mm XLPE Cable: Providing all labour, materials, T&P, testing equipment, transportation and incidental charges for making, assembling and filling of 11 KV Cable Jointing Kit suitable for 3C × 185 Sq.mm XLPE Cable, including cable cutting, dressing, plumbing, insulation preparation, taping, installation of jointing kit components, supply and crimping of suitable size heavy-duty aluminium/copper lugs and ferrules, heat shrink/cold shrink application, sealing, insulation restoration and completion of joint as per manufacturer's specifications and RESPO norms. The work shall also include testing of joint, providing all consumables such as lugs, ferrules, tapes, sealing materials and accessories, safety arrangements, barricading, ROW constraints and all associated works required for satisfactory completion of the job as per approved drawings and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, materials, T&P, testing, taxes, duties, overheads, contractor's profit and all incidental expenses, complete in all respects. |
| 57 | Providing and Installation of Maintenance-Free Chemical Earthing Electrode (80 mm × 3000 mm) for Transformer Body/Neutral Earthing: Providing all labour, materials, T&P, transportation and incidental charges for supplying, installing, testing and commissioning maintenance-free, multifaceted, proactive and corrosion-resistant chemical earthing electrode of size 80 mm dia × 3000 mm length complete with 50 kg approved backfill compound, including excavation of earth pit in all types of soil, installation of electrode, filling with backfill compound, watering, backfilling and proper compaction. The work shall also include supply, laying, welding and fixing of suitable size MS earth strip for connection of transformer body/neutral to the earthing electrode, welding of earth strip to earthing and neutral support, provision of nuts, bolts, clamps, test links, protective covers and all associated accessories required for complete earthing arrangement as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The item shall include testing of earth resistance, safety arrangements, barricading, ROW constraints, disposal of surplus earth and all associated works. The rate shall be inclusive of all labour, materials, T&P, testing, taxes, duties, overheads, contractor's profit and all incidental expenses, complete in all respects. |
| 58 | Providing and Trenchless Laying of 140/160 mm OD PN-4, PE-80, UV Stabilized HDPE Pipe: Providing all labour, materials, T&P, trenchless drilling equipment, transportation and incidental charges for supplying and trenchless laying of 140/160 mm OD PN-4, PE-80 grade UV stabilized HDPE pipe conforming to relevant IS specifications in standard 6 m lengths, for underground cable routing, including pilot boring, horizontal directional drilling (HDD)/trenchless crossing, reaming, pulling, jointing, alignment, installation of pipe, necessary excavation at entry and exit pits, backfilling, disposal of surplus earth, and restoration of disturbed surfaces complete. The work shall include all consumables, safety arrangements, barricading, traffic management, protection of existing underground/overhead utilities, crossing of roads, drains, railways and other obstructions, obtaining necessary permissions, and execution under all prevailing ROW conditions as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The rate shall be inclusive of cost of HDPE pipe, labour, T&P, machinery, testing, taxes, duties, overheads, contractor's profit and all incidental expenses required for satisfactory completion of the work. Measurement shall be based on the actual length of HDPE pipe successfully laid through trenchless methodology. |
| 59 | Laying of 11 KV XLPE Cable 3C × 185 Sq.mm in HDPE Pipe (Double Circuit): Providing all labour, T&P, cable laying equipment, transportation and incidental charges for laying of 11 KV XLPE Cable 3C × 185 Sq.mm (3305 × 2 = 6610 m running length for Double Circuit) through pre-laid HDPE pipe, including handling of cable drums, cable pulling with suitable winches and rollers, lubrication, dressing, positioning, alignment, protection against mechanical damage, and leaving adequate spare cable in loop formation at both ends for future jointing/termination requirements as per RESPO norms and approved drawings. The work shall also include cable identification, route marking assistance, testing assistance, safety arrangements, barricading, traffic management, protection of existing utilities, execution under all prevailing ROW conditions, and all associated works required for satisfactory completion of the job as per directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, T&P, consumables, taxes, duties, overheads, contractor's profit and all incidental expenses, complete in all respects. |
| 60 | Erection and Fixing of 11 KV Fuse Set on PCC Pole: Providing all labour, T&P, transportation and incidental charges for erection, mounting and fixing of 11 KV Fuse Set on PCC Pole, including supply and fixing of all required mounting hardware, MS clamps, channels, nuts, bolts, washers, support arrangements and other accessories necessary for proper installation and alignment of the fuse set, complete as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The Fuse Set shall be supplied by the Department free of cost. The item shall also include lifting, positioning, tightening, adjustment, safety arrangements, barricading, execution under prevailing ROW conditions and all associated works required for satisfactory completion of the job. The rate shall be inclusive of all labour, T&P, consumables, taxes, duties, overheads, contractor's profit and all incidental expenses, complete in all respects. |
| 61 | Providing, fabricating, and fixing of standard vitreous enameled Danger Boards (conforming to relevant Indian Standards / DISCOM specifications), complete in all respects. The scope of work includes the supply of the danger notice plate featuring the standard skull and crossbones symbol, along with warning inscriptions in Hindi, English, and the local language. The plate shall be rigidly mounted onto line supports, double-pole structures, or fencing using custom-fabricated clamping arrangements made of M.S. Flat, complete with galvanized (GI) anti-theft bolts, nuts, and washers to prevent unauthorized removal. The rate is composite and fully inclusive of the cost of the danger board, customized mounting clamps, high-tensile hardware, skilled labor, tools & plants (T&P), and all allied works strictly as per standard RESPO drawings, safety regulations, and directions of the Site In-charge. |
| 62 | Providing and applying two comprehensive coats of high-grade, weather-resistant Aluminum Paint of ISI-certified make over 13-meter long Steel Tubular (ST) line supports/structures, complete in all respects. The scope of work includes thorough mechanical surface preparation (or secondary cleaning over the anti-corrosive primer coat) to remove all dust, moisture, grease, or contaminants using fine emery paper, wire brushes, and dry cloths before paint application. The contractor shall supply all painting materials, including premium-quality, high-gloss ISI-marked aluminum paint (dual-pack paste and medium mix or pre-mixed as specified), thinners, high-grade rollers/brushes, and consumables. The application must achieve a uniform, streak-free, bright metallic finish with optimum dry film thickness across the entire exposed surface area of the pole strictly as per standard RESPO drawings, industrial painting norms, and directions of the Site In-charge. The rate is composite and fully inclusive of all premium aluminum paint materials, surface cleaning labor, scaffolding, safety belts/harnesses for working at heights, specialized tools & plants (T&P), and cleanup. |
| 63 | Providing, fabricating, and wrapping of galvanized (GI) Barbed Wire anti-climbing guards around line supports, complete in all respects. The scope of work includes the supply of high-tensile, heavily galvanized barbed wire conforming to relevant Indian Standards (IS:278). The wire shall be tightly and uniformly wrapped/wound around the steel tubular or PCC poles starting at a height of 2.5 meters above the ground level up to a vertical span of 1.0 meter (or as per approved drawing) to prevent unauthorized climbing. The contractor shall provide all custom-fabricated MS clamping arrangements, fixing materials, binding wires, and high-tensile galvanized nuts and bolts to rigidly secure the ends of the barbed wire matrix. The rate is composite and fully inclusive of the cost of the GI barbed wire, anti-theft hardware accessories, skilled labor, safety gear for handling sharp materials, tools & plants (T&P), and all allied works strictly as per standard RESPO drawings, safety regulations, and directions of the Site In-charge. |
| 64 | Providing and placing of heavy-duty, cured Stone Pads (300 X 300 X 75 mm or cast cement concrete blocks of equivalent dimensions) at the base of excavated support pits, complete in all respects. The scope of work includes proper leveling, ramming, and consolidation of the pit bottom bed prior to positioning the stone pad. The pad must be precisely centered to act as a solid, load-bearing base plate directly beneath the bottom of Steel Tubular (ST) or Pre-stressed Concrete (PCC) poles. This structure is designed to uniformly distribute the vertical downward thrust of the dead-weight of the support assembly and prevent the pole from sinking into soft, loose, or waterlogged strata. The rate is composite and fully inclusive of the supply of the stone pad/base block, transit to the site, manual handling, precision alignment, tools & plants (T&P), and all associated labor works strictly as per standard RESPO drawings, departmental construction norms, and directions of the Site In-charge. |
| 65 | Providing, and rigidly fixing of heavy-duty MS \\"F-Brackets\\" (forming part of the line cross-arm assembly) suitable for 11 kV overhead lines, complete in all respects. The scope of work includes sourcing high-grade Structural Steel Channels/Angles conforming to relevant Indian Standards (IS:2062), precision cutting, welding, and drilling as per approved structural layouts, followed by a mandatory dual coat of anti-corrosive primer or hot-dip galvanization to resist atmospheric weathering. The contractor shall supply all necessary mounting hardware, including high-tensile Galvanized Iron (GI) nuts, bolts, matching spring washers, and backing plates. Execution covers hoisting the assembly to the designated cross-arm level on the 11 kV supports, structural alignment, and firm tightening to securely hold pin or disc insulator configurations strictly as per standard RESPO drawings, departmental distribution norms, and directions of the Site In-charge. The rate is composite and fully inclusive of material cost, fabrication, safety harnesses for working at heights, tools & plants (T&P), and specialized skilled labor. |
| 66 | Providing, fabricating, stringing, and rigidly fixing of cradle/box guarding under 11 kV overhead power lines using Galvanized Iron (G.I.) wire of specified gauge (4 SWG, 6 SWG, or 8 SWG), complete in all respects. The scope of work includes the layout and erection of structural guarding frameworks at all mandatory cross-over points such as public road crossings, telecommunication line crossings, and residential corridors. The work includes fabricating and mounting specialized guarding cross-arms/lacings on line supports, uncoiling, straightening, paying out, tensioning, and robust binding/clamping of the longitudinal and lacing wires to form a secure protective mesh. The entire guarding matrix must be effectively connected to the support earthing system to ensure instant tripping of the feeder in the event of line conductor snapping. The rate is composite and fully inclusive of the contractor-supplied G.I. wire (4/6/8 SWG), structural lacing materials, fasteners, specialized wire stretchers, tools & plants (T&P), safety arrangements/guarding while working under running utilities, and skilled labor deployed strictly as per standard RESPO drawings, Indian Electricity Rules, and directions of the Site In-charge. |
| 67 | Providing, assembling and fixing of Dead End Clamp with Eye Hook of approved make and specification on overhead line complete in all respects, including supply of all nuts, bolts, washers and other accessories required for proper installation, drilling wherever required, tightening, alignment, testing, labour, T&P, loading, unloading, transportation, handling at site and all other incidental works as per approved drawings, REPO/Departmental norms and directions of the Engineer-in-Charge |
| 68 | Providing, assembling and fixing of Suspension Clamp of approved make and specification on overhead line complete in all respects, including all nuts, bolts, washers and other accessories required for proper installation, labour, T&P, loading, unloading, transportation, handling at site, testing and all incidental charges as per approved specifications, RESPO/Departmental norms and directions of the Engineer-in-Charge |
| 69 | Providing, assembling and fixing of Holding Clamp of approved make and specification complete in all respects, including supply of all nuts, bolts, washers and other accessories required for proper installation, labour, T&P, loading, unloading, transportation, handling at site and all incidental charges, as per approved specifications, RESPO/Departmental norms and directions of the Engineer-in-Charge |
| 70 | Providing and fixing of PRC complete with all required fittings, clamps, nuts, bolts and accessories, including labour, T&P, transportation and fixing charges, complete as per RESPO norms, approved drawings and directions of the Engineer-in-Charge. The rate shall be inclusive of all materials, labour, T&P, ROW constraints and incidental expenses, complete in all respects. |
| 71 | Providing, assembling and fixing of 11 KV Cross Arm of approved design and specification complete in all respects, including supply of all nuts, bolts, clamps, washers and other accessories required for proper installation, erection on pole, alignment, tightening, labour, T&P, loading, unloading, transportation, handling at site and all incidental charges, as per approved specifications, RESPO/Departmental norms and directions of the Engineer-in-Charge |
| 72 | Providing, Erection and fixing of Distribution Box 3 Phase with Nut & Bolts on pole, as per RESPO/Norms and as per direction of site incharge. |
| 73 | Providing, Erection & Fixing of 11 KV TPMO set on PCC Pole by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge. (Only TPMO Set will be provided by Department. |
| 74 | Dismantling of existing 11KV Line and old & used conductor and and bundling same including carriage of above material form site of work to JE Store/ESC-Hapur, with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge. |
| 75 | Dismantling of existing 11KV Line (11 Mtr STP- 78 Nos.) and opening of all accessories. Iron/steel Scrap (ST pole scrap 136.50 qtl. + meltable scrap 26.70 qtl.) including carriage of above material form site of work to JE Store/ESC-Hapur, with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge. |
| 76 | Dismantling of existing PCC Pole 8.5m/9m/11m of 11KV line, as per direction of site incharge. |
| 77 | Carrying out pre-commissioning checks, jumpering, and complete line energization of the newly erected 33 kV overhead line and underground cable system, complete in all respects. The scope of work includes executing heavy-duty jumper connections at terminal poles, double-pole (DP) structures, cut-points, and isolation switches using proper PG clamps, bimetallic connectors, or crimped aluminum lugs as per layout requirements. It includes conducting mandatory pre-energization safety and technical tests—including insulation resistance (Megger) profiling, phase-sequence verification, continuity mapping, and high-voltage (Hipot) testing where applicable. The contractor shall coordinate with the grid substation staff, manage formal permit-to-work (PTW) closures, safely remove temporary lines/earthing sets, and sequentially energize the system under live conditions. The rate is inclusive of specialized testing instruments, safety gear, line-clearance tools, liaison assistance, and highly skilled electrical labor deployed strictly as per standard RESPO/CEA norms, distribution engineering safety manuals, and directions of the Site In-charge. |
| 78 | Lopping, trimming, or complete cutting of tree branches/trees obstructing the right-of-way (ROW) or clearance corridor of 33 kV overhead power lines, complete in all respects. The scope of work includes identifying and clearing all overhanging limbs, dense foliage, or hazardous trees that infringe upon the statutory safety clearances prescribed by grid distribution standards. The contractor shall arrange for all necessary tools and safety gear, including mechanized chain saws, heavy-duty ropes, ladders, axes, and safety helmets/harnesses for working at heights. The execution covers the controlled lowering of heavy branches to prevent damage to existing overhead conductors, poles, or surrounding public/private property, followed by the systematic clearing, bundling, and disposal of the cut wood and debris away from the line corridor. The rate is composite and fully inclusive of specialized labor, tools & plants (T&P), local authority coordination/liaison where required, hazard management, and site clearance strictly as per standard RESPO safety norms and directions of the Site In-charge. |
| 79 | FOR SHIFTING OF L.T. AND 11KV LINE AND OTHER ASSOCIATED WORKS DUE TO WIDENING OF DHAULANA-PILKHUWA-BHOJPUR ROAD IN DEPOSIT SCHEME, IN THE JURISDICTION OF EDD-PILKHUWA UNDER EDC HAPUR. (All work will be completed as per Sanctioned estimate.) |
| 80 | Carriage of all petty material of estimate, from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 81 | Carriage of all type cable/conductor of estimate fromElectricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 82 | Carriage of PCC Pole 11 mtrs. Long from Electricity Store Centre at Hapur / J.E. Store to the site of work, including loading and unloading at both ends. The work shall be executed over kachha and pakka roads as per the directions of the Site In-charge. The scope includes arrangement of suitable transport, labour for loading/unloading, and all necessary Tools & Plants (T&P). The lead distance shall be up to 0–50 Km, covering stores located at Hapur / Ghaziabad / Bulandshahr. |
| 83 | Erection and Fixing of 11-meter long PCC poles for a 11 kV overhead line, after manual or mechanical digging of pits of suitable dimensions in all types of soil including black cotton or rocky strata. Scope of work includes providing, fabricating, and fixing of F-Brackets made of M.S. Flat (size 50x6 mm), and heavy-duty pole holding clamps made of M.S. Flat (size 50x6 mm), complete with all necessary galvanized (GI) nuts, bolts, and washers. The work covers proper alignment, leveling, structural support setup, and installation of all requisite line accessories strictly as per standard RESPO drawings, departmental norms, and directions of the Site In-charge. The rate is inclusive of all skilled/unskilled labor, specialized tools & plants (T&P), pulling/lifting machinery or cranes, safety arrangements near running utilities, and complete site restoration. |
| 84 | Grouting of PCC Supports: Providing all labour, materials, T&P, transportation and incidental charges for grouting of PCC supports in cement concrete of ratio 1:4:8 (1 Cement : 4 Sand : 8 Brick Ballast/40 mm Aggregate) in foundation block of size 450 mm × 450 mm and depth equal to 1/6th of the full length of the support below ground level, including construction of 300 mm high plinth above ground level in cement concrete ratio 1:3:6 (1 Cement : 3 Coarse Sand : 6 Stone Grit) with proper mufting, excavation in all types of soil, positioning and alignment of support, backfilling, watering, compaction and proper ramming complete as per approved drawings, RESPO norms and directions of the Engineer-in-Charge. The rate shall be inclusive of all labour, materials, T&P, safety arrangements, barricading, ROW constraints, disposal of surplus earth, taxes, duties, overheads and contractor's profit, complete in all respects. |
| 85 | Laying, Stringing and final sagging of LT AB Cable 3x120 Sqmm as per RESPO/Drawing Norms and as per direction of site lnchargc |
| 86 | Providing and fixing of Dead End Clamp with Eye Hook, as per RESPO/Norms and as per direction of site incharge. |
| 87 | Providing and fixing of I-Hook, as per RESPO/Norms and as per direction of site incharge. |
| 88 | Providing and fixing of PRC, as per RESPO/Norms and as per direction of site incharge. |
| 89 | Providing and fixing of Distribution Box 3 Phase with Nut & Bolts, Clamp etc. as per RESPO/Norms and as per direction of site incharge. |
| 90 | Dismantling of existing Line and old & used conductor and opening of all accessories (Conductor- 50 Kg.) including carriage of above material form site of work to JE Store/ESC-Hapur with loading and unloading at both ends on Kuchha Packka road, as per direction of site lncharge. |
| 91 | Dismantling of existing PCC Pole 8.5m/9m/11m of LT line , as per direction of site incharge. |
| 92 | Jumpering and line energisation work properly as per RESPO/Norms and as per direction of site inchnrge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
