|
| 1 | Supply and fix following parts / components of “CHAIR DINING WITH CUSHIONED” of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed :- (Drawing Number : FD/MAP-II/04) |
| 2 | Front leg made out of teakwood of size and specification as per drawing. |
| 3 | Rear leg made out of teakwood of size and specification as per drawing. |
| 4 | Bottom stiffener long first class hard wood (teak wood) of size and specification as per drawing. |
| 5 | Bottom stiffener short first class hard wood (teak wood) of size and specification as per drawing. |
| 6 | Short rail and made of first class hard wood (teak wood) of size and specification as per drawing. |
| 7 | Long rail made of one piece of first class hard wood (teak wood) of size and specification as per drawing. |
| 8 | Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with tapestry as directed. |
| 9 | Supply and fix following parts / components of “CHAIR EASY” of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match the existing including removal of old unserviceable parts/components complete all as shown on drawing and as directed :- (Drawing Number : FD-229) |
| 10 | Front / Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 11 | Arm rest made of first class hard wood (teak wood) of size and specification as per drawing. |
| 12 | Seat Front / Rear / side rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 13 | Back Upper / bottom rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 14 | Supply and fix following parts / components of “CHAIR DINING ” of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts/components complete all as shown on drawing and as directed :- (Drawing Number : FD-228/ 279/ 262) |
| 15 | Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 16 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 17 | Long / short rail of seat made of first class hard wood (teak wood) of size and specification as per drawing. |
| 18 | Stiffener of back made of first class hard wood (teak wood) of size and specification as per drawing. |
| 19 | Short & long stiffener of bottom made of first class hard wood (teak wood) of size and specification as per drawing. |
| 20 | PVC seat (18\\" x 16\\") fixed with wood screw of 20mm on four sides complete all as per drawing & as directed. |
| 21 | Material and labour for re-canning of Chair Dining using 4 mm wide half round plastic cane including removal of old plastic cane and including preparation of old polish surface of chair dining complete all as shown on drawing and as directed. (Drawing Number : FD-228/ 279/ 262) |
| 22 | Supply and fix follwing parts / components of “PEG TABLE” of same size, existing pattern with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts/componets complete all as shown on drawing and as directed:- (Drawing Number : FD-236 & 277) |
| 23 | Top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with PVC beading all around. |
| 24 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 25 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 26 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 27 | Supply and fix following parts / components of “ SIDE BOARD” of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts/componets complete all as shown on drawing and as directed:- (Drawing Number : FD-26 (M) / 371) |
| 28 | Back made out of 6 mm thick plywood. |
| 29 | Top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around. |
| 30 | Door made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around. |
| 31 | Drawer made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around. |
| 32 | 100 mm size aluminium hasp & staple as per drawing |
| 33 | Knob 40mm dia as per drawing. |
| 34 | Supply and fix following parts / components of “TABLE CENTER” of same size, existing pattern , same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts/components complete all as shown on drawing and as directed:- (Drawing Number : FD-235 & 274) |
| 35 | Top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around. |
| 36 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 37 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 38 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 39 | Supply and fix following parts / components of “TABLE COMPUTER” of same size, existing pattern and same texture, with necessary beading, screw, nut, bolt etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD/E6/MAP/03) |
| 40 | Top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around. |
| 41 | Drawer made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge/GE. |
| 42 | Pull out tray for Mouse made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge/GE. |
| 43 | Pull out tray for Key Board made out of 18 mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around as per manufacturer's instructions and other side French polishing with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge/GE |
| 44 | Supply and fix following parts / components of “TABLE DINING 6 / 8 PERSON ”of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD-239 & 273) |
| 45 | Tops from TABLE DINNIG 6 PERSON made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around. |
| 46 | Tops from TABLE DINNIG 8 PERSON made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around. |
| 47 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 48 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 49 | Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood) of size and specification as per drawing. |
| 50 | Long rail for TABLE DINING 8 PERSON made of first class hard wood (teak wood) of size and specification as per drawing. |
| 51 | Supply and fix following parts / components of “TABLE BED SIDE ” of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD - 276 ) |
| 52 | Back of 6 mm thick commercial face plywood of size and specification as per drawing. |
| 53 | Side (right & left) made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) complete all as specified as per drawing. |
| 54 | Top / middle shelf made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) complete all as specified as per drawing. |
| 55 | Supply and fix following parts / components of “TABLE DRESSING GENTS WITH MIRROR\\" of same size, existing pattern same texture to match with existing, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD 230) |
| 56 | 5 mm thick Looking Mirror with 06 mm thick plywood at the back with complete frame of first class hard wood for mirror complete all as specified in drawing. |
| 57 | Lower wooden box made out of 18 mm thick pre-laminated particle board exterior grade(ISI marked) and one side French polishing, 6 mm thick back plywood & knob 40mm dia complete all as specified in drawing |
| 58 | Removing following old and unserviceable parts / components of “Teapoy wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-232 & 278) |
| 59 | Removing old u/s tops from Teapoy wooden and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teakface & other side white with PVC beading all around all as specified in drg as directed by Engr-in-charge. |
| 60 | Legs of first class hard wood (teak wood) of size and specification as per drawing. |
| 61 | Short rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 62 | Long rail of first class hard wood (teak wood) of size and specification as per drawing. |
| 63 | Supply and fix following parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD-41, 224, 283) |
| 64 | Top of table 3 x 2 made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around complete all as specified in drawing. |
| 65 | Leg made of first class hard wood (teak wood) of size and specification as per drawing. |
| 66 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 67 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 68 | Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 69 | Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 70 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 71 | Supply and fix following parts / components of “TABLE 3' x 3' WOODEN” of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match wiht existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD-88 M, 291) |
| 72 | Top of table 3 x 3 made out of 18mm thick pre-laminated particle board exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around. |
| 73 | Leg made of first class hard wood (teak wood) of size and specification as per drawing. |
| 74 | Long rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 75 | Short rail made of first class hard wood (teak wood) of size and specification as per drawing. |
| 76 | Long bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 77 | Short bottom stiffeners made of first class hard wood (teak wood) of size and specification as per drawing. |
| 78 | Supply and fix following parts / components of “TABLE WRITING (STUDY) ” of same size, existing pattern and same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD-33 & 275, 249) |
| 79 | Top made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around. |
| 80 | Legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 81 | Complete drawer made out of 12 mm thick plywood of size and specification as per drawing. |
| 82 | Shutters made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around. |
| 83 | Material and labour for cushion foam of 40 Kg/Cubic Metre density, with fabric cushion cover for seat of SOFA SET 5/4 seater, superior quality of foam & covertepesty cloth approved by GE not less than Rs 340/- per Running Metre. (Drawing Number : FD-281) |
| 84 | Supply and fix following parts / components of “TABLE DRESSING LADIES” of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts/components complete all as shown on drawing and as directed:- (Drawing Number : FD - 251) |
| 85 | Looking Mirror of approved quality with back of 06 mm plywood and frame of size and specification as per drawing. |
| 86 | Lower wooden box with drawer made out of 18 mm thick pre-laminated plywood board with exterior grade type II (ISI marked) one side teak face & other side with PVC beading all around, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing. |
| 87 | Supply and fix following parts / components of “CHAIR WRITING ” of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD-250, 280, 285) |
| 88 | Front legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 89 | Rear legs made of first class hard wood (teak wood) of size and specification as per drawing. |
| 90 | Front / Rear / Side rail of seat made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 91 | Stiffener of Back made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 92 | Short / long stiffener of bottom made of first class hard wood (Teak wood) of size and specification as per drawing. |
| 93 | Supply and fix following parts / components of “REPAIRS TO HAT STAND WITH MIRROR” of same size, existing pattern and same material, with beading, screw etc and polishing to match with existing including old and unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD-233) |
| 94 | 5 mm thick looking mirror of size and specification as per drawing. |
| 95 | 3 mm thick Veneered plywood of size and specification as per drawing. |
| 96 | 9 mm thick Back Plywood of size and specification as per drawing. |
| 97 | Aluminium Peg of size and specification as per drawing. |
| 98 | Repairs to Sofa set 5 Seater by replacing old unservicable seat / back cushion foam with tapestry cloth/rexin/leatherite and other aceesories what so ever required as per existing pattern/structure and sample approved by Engr - in - Charge/GE. (Drawing Number: HOF/Godrej/Durian). |
| 99 | Supply and fix following parts / components of “SOFA 3 SEATER” same size, existing pattern and same material, with beading, screw, etc and polishing to match with existing including removal of old unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD - 281 / 258 / 373) |
| 100 | Arms made out of teakwood of size and specification as per drawing. |
| 101 | Front leg made out of teakwood of size and specification as per drawing. |
| 102 | Rear leg made out of teakwood of size and specification as per drawing. |
| 103 | Batten for seat and back made out of teak wood of size and specification as per drawing. |
| 104 | Supply and fix following parts / components of “SOFA 5 SEATER” of same size, existing pattern and same material, with beading, screw, etc and polishing to match with exiting including removal of old and unserviceable parts / components complete all as shown on drawing and as directed:- (Drawing Number : FD - 281 / 258 / 373) |
| 105 | Arms made out of teak wood of size and specification as per drawing. |
| 106 | Front leg made out of teak wood of size and specification as per drawing. |
| 107 | Rear leg made out of teak wood of size and specification as per drawing. |
| 108 | Batten for seat and back made out of teak wood of size and specification as per drawing. |
| 109 | Supply and fix wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail veries type of wooden table(Table Dining, Table Writing, Table 3x2, Bed Plywood Top) fixed with 2 Nos screw and duly polishing to match the existing complete as specified and directed. |
| 110 | BED HARD WITH PLYWOOD TOP (DRAWING NUMBER : FD-246, 247) |
| 111 | Removing of unserviceable plywood top and supply and fix in replacement new 12mm thick commercial plywood BWR grade, ISI marked complete as per drawing and as directed. |
| 112 | Material and labour for replacement of damaged/ unserviceable long rail with new long rail made of 1st class HW, duly french polished complete all as per drawing and as directed. |
| 113 | Material and labour for replacement of damaged/ unserviceable short rail with new short rail made of 1st class HW, duly french polished complete all as per drawing and as directed. |
| 114 | Material and labour for replacement of damaged/ unserviceable head board with new head board made of 4 mm thick plywood BWR grade, one side teak facing complete all as per drawing and as directed. |
| 115 | Material and labour for replacement of damaged/ unserviceable foot board with new foot board made of 4 mm thick plywood, BWR grade, one side teak facing complete all as per drawing and as directed. |
| 116 | Material and labour for replacement of damaged/ unserviceable leg with new leg made of 1st class HW, duly french polished complete all as per drawing and as directed. |
| 117 | Material and labour for preparation of old polished surface of following wooden furniture article by emery paper to get the surfaces smooth with filling of putty where ever required and applying one or more coat of French polish / clear Varnish complete all as specified and directed:- |
| 118 | Board Notice ( Drawing Number : GE (AF) J/FD-19-03) |
| 119 | Chair dining ( Drawing Number : FD 279) |
| 120 | Chair Dining (Drawing Number : FD/MAP-II/04) |
| 121 | Chair dining long back (Drawing Number : FD-357 ) |
| 122 | Chair easy (Drawing Number : FD-229) |
| 123 | Chair writing (Drawing Number : FD 250,280) |
| 124 | Hat stand with mirror (Drawing Number : FD-362) |
| 125 | Peg table (Drawing Number : FD 277) |
| 126 | Stool dressing (Drawing Number : FD/MAP-II/07) |
| 127 | Sofa set 5 seater (Drawing Number : FD 281) |
| 128 | Sofa set 4 seater (Drawing Number : FD 281) |
| 129 | Table office officer (Drawing Number : DB 4120) |
| 130 | Table dining for 6 persons (Drawing Number : FD 239, 273) |
| 131 | Table dining for 8 persons (Drawing Number : FD 239, 273) |
| 132 | Table writing (Drawing Number : FD 249,275) |
| 133 | Table centre (Drawing Number : FD-274) |
| 134 | Table dressing gents with mirror (Drawing Number : FD 238, FD/E6/MAP/16) |
| 135 | Table dressing ladies with mirror (Drawing Number : FD 378,251 FD/MAP-II/07 ) |
| 136 | Teapoy (Drawing Number : FD-232,278) |
| 137 | Table bed side (Drawing Number : FD/E6/MAP15 ®) |
| 138 | Table 1520 x 860 x 760 (DDrawing Number : FD 139,289) |
| 139 | Table 900 x 600 x 760 w/o drawer (Drawing Number : FD 223,224,283) Please Enable Macros to View BoQ information |
