|
| 1 | Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Dismantling of Fencing posts or struts (wood, steel RCC) any section, posts embeded in natural ground etc, including taking out embeded portion and making good distrubed ground complete all as specified and as directed |
| 3 | Dismantling of fencing wire mesh, any type etc complete all as specified and as directed |
| 4 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed |
| 5 | Excavating in post holes(or similar holes) each n exc .5 cum getting out in Hard / Dense soil soil,returning, filling in and ramming earth in layers n exc 25 cm etc complete all as specified and as directed |
| 6 | Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for for shafts, wells cesspits, manholes, piers holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard / dense soil etc complete all as specified and as directed |
| 7 | M&L for plain cement concrete 1:4:8 type D-2, with using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and as directed |
| 8 | M&L for Form work to sides of concrete foundations (Flat), footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 9 | M&L for plain cement concrete 1:2:4 type C-1, with using 20 mm grades stone aggregates as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and base) etc complete all as specified and as directed |
| 10 | S & F posts and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed |
| 11 | Supply only galvanised chain link fencing of mesh size (100mmX100mmX4.00mm /75mmX75mmX3.15mm) etc complete all as specified and as dicected |
| 12 | Fixing only galvanised chain link fencing of mesh size (100mmX100mmX4.00mm /75mmX75mmX3.15mm)) size and any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and as directed |
| 13 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end andscrewed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, exc 5cm but not exc 10 cm long etc complete all as specified and as directed |
| 14 | Supply & Fixing mild steel round bars 10 mm dia and over as in horizontal supporting member of chain link fencing confiring to Fe-410-W (Gde -E-250 Qaulity A or Fe-290 (Gde-E-165) etc complete all as specified and as directed |
| 15 | M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 , incl demolition of block/brick work etc complete all as specified and as directed |
| 16 | M&L for Cement Concrete Type B-0, 1:2:4 (using 12.50 mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed. |
| 17 | M&L for Walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 incl demolition of stone masonry work etc complete all as specified and as directed |
| 18 | All as per item no 17 above but except stone work incl demolition of stone masonry work etc complete all as specified and as directed |
| 19 | M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 20 | M&L Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed. |
| 21 | M&L key pointing to squared rubble masonry, coursed or in cement mortar 1:4 etc complete all as specified and as directed. |
| 22 | M&L key pointing to squared rubble masonry, coursed or in cement mortar 1:4 etc incl Raking out joints/ pointing to masonry or brick-work in single detached joints for flashing, etc. complete all as specified and as directed. |
| 23 | M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 24 | M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment incl 50 mm thick M Sand cushioning incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed |
| 25 | S&F for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick in CM 1:6 incl demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed complete all as specified and directed. |
| 26 | M&L for Precast cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 incl dismantling of existing RCC of any description etc complete all as specified and directed. |
| 27 | M&L TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete. |
| 28 | S& F framed work such as grills, gratings, guard bars etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 incl dismantling of existing Mild steel work work etc complete all as specified and directed. |
| 29 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc incl dismantling of existing Mild steel work work etc complete all as specified and directed. |
| 30 | S&F in repairs 0.50 mm thick Pre-painted galvalume aluminium Zinc Coating GI based plain perforated sheet, pattern, shape, colour, size of holes in sheet, pitches as directed by GE, fixed in vertical surface as in view cutter / wall cladding over compound wall with self tapping screw etc including necessary scaffolding etc complete all as specified and as directed.Note:- Work required to be carried out at height upto 3 mtrs. Contractor has to quote the rate accordingly. Nothing extra shall be admissible on this account. |
| 31 | M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 32 | M&L for rubber moulded pre-cast Kerb stones of cement concrete 1:2:4 (20mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectely levelled surface pointed and jointed in CM 1:4 etc complete all as specified and as directed |
| 33 | M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed |
| 34 | Preparation of old treated plastered or unplastered wall of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying one coat of Cement Base white wash on wall surfaces all as specified and as directed. |
| 35 | Complete Removal of old treated plastered or unplastered wall of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying Two Coat of Cement Base Paint etc complete all as specified and as directed. |
| 36 | M&L for Preparation New of previously un treated steel and iron surface of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 37 | M&L for Preparation New Concrete surface of any description and appling with two coats of synthetic enamel paint over a coat of primer etc complete all as specified and as directed |
| 38 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed |
| 39 | Removing excavated material exc. 50 m and not exc 250m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed |
| 40 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.00Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed Please Enable Macros to View BoQ information |
