|
| 1 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, weldingetc. including dismembering and stacking within 50 metres lead. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Enginee in - charge.15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Pucca brick work in foundation and plinth using common burnt clay local best quality bricks in cement mortar 1: 6 (1 cement : 6 river sand) including curing etc. complete . |
| 4 | Half brick masonary with local best quality bricks in superstructures above plinth level upto floor five level in cement mortar 1: 4 (1 cement : 4 river sand). |
| 5 | 12 mm cement plaster of mix 1 : 6 (1 cement : 6 river sand) at all height . |
| 6 | Painting with synthetic enamel paint of approved brand & manufacture in all shades to give an even & smooth shade including cleaning of surface :Old wood / steel works |
| 7 | Providing & fixing white vitreous china wash basin along including making all connections but excluding the cost of fittings of following sizes (ii) 450 x 300 mm |
| 8 | Providing & fixing in position 60 x 45 cm plain mirror superior glass of approved quality complete with 6 mm thick hard board ground fixing to wooden cleats with CP brass screws and washer complete |
| 9 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required : |
| 10 | Dismantling AC Plain or corrugated / transparent sheets in roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 m lead |
| 11 | Providing and fixing 30 mm thick glazed shutters for doors, windows & clerestorty windows of local best quality wood using 4 mm float glass panes including black enamelled ISI marked MS butt hinges with necessary screws |
| 12 | Dismantling of wooden / MS doors, windows and clerestory windows shutters of area 3 Sqm. & below including frames; hold fast etc. complete and stacking of serviceable materials and disposal of unserviceable materials up to Township maintenance store |
| 13 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts andwashers, complete as per manufacturer's specification anddirection of Engineer-in-charge. (For W.C. and bathroom door shutter). sqm |
| 14 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of oldWC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern WC pan |
| 15 | Providing & fixing approved quality white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively |
| 16 | Providing & fixing brass stop cock of 15 mm of approved quality |
| 17 | Providing & fixing PVC waste of approved quality. |
| 18 | Providing and fixing approved quality MS pressed butt hinges bright finished with necessary screws etc. complete:(b) 100 x 58 x 1.90 mm |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (c) 25 mm nominal bore |
| 20 | Providing & fixing PVC bib cock of approved quality |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (b) 20 mm nomonal bore |
| 22 | Providing and fixing approved quality MS bright finished handle with necessary screws etc. complete:(a) 75 mm |
| 23 | Providing & fixing oxidised approved quality MS tower bolts with necessary screws etc. complete :(a) 100 x 10 mm |
| 24 | Providing & fixing approved quality oxidised MS sliding door bolts with nuts & bolts etc. complete:(b) 300 x 16 mm |
| 25 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqmincluding pointing in white cement mixed with pigment of matching shadecomplete. |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming toIS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete. |
| 27 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 29 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriatepriming coat, preparation of surface, etc. complete. On steel work |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) : 80 mm nominal bore |
| 31 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 32 | Providing & fixing asbestos cement 6 mm thick corrugated sheets in roofing & side cladding and fixing with GI J or L hooks, bolts & nuts 8mm dia including GI plain & bitumen washers complete at all height excluding the cost of purlins, rafters, trusses © Height above 10.00 M & up to 15.00 M |
| 33 | Providing & fixing approved quality 10 litres low / high level PVC cistern with manually control device (Handle lever) confirming to IS-7231 with all fittings and fixtures complete |
| 34 | Renewing approved quality glass panes with putty / wooden fillets and nails where ever necessary (a) 3 mm thick @ 7.50 Kg/Sqm |
| 35 | Distempering (one or more coat) with oil bound washable distemper of approved brand & manufacture in all shades in old work to give an even shade |
| 36 | providing and fixing transparent sheet in roofing and in side cladding with galvanised iron J or L hooks , Bolts and nuts 8 mm / 6mm dia GI plain and bitumen washers complete excluding the cost of purlins rafters , trusses and other supporting structures (a) upto 60 degree pitch |
| 37 | Engagement of manpower for miscellenous civil work as per the direction of Engineer-In-Charge Please Enable Macros to View BoQ information |
