Name of Work:- Estimate for repair of Carrier Channel Gate and provision of Display Board on Jainti Dam and Perch Dam.
Sl. No.
Item Description
1
Overhauling of gate mechanism of all types including dismanteling, greasing,oiling and reinstallationof mechanism complete in all respect. Upto 10 ft width of gate.
2
Removing old damaged seal bulb or flat including clamp plate for all size and type.
3
Providing Hollow Bulb Seal and fixing in position including preparation of suface complete in all respects and to entire satisfaction of Engineer-in-charge (100/44).
4
Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 80mm dia x12mm th.
5
Steel work fixed independently without connecting plates including cutting hoisting and fixing in position for Tees angles & channels.
6
Providing chequred plate 8 mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge..
7
Supply of spindle for hoist Mechanism including threading and machining complete in all respects and to entire satisfaction of enginer incharge (i) up to 55mm dia
8
Providing and Fixing Galvanized Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.
9
Scrapping, brushing to remove paint to bare metal surface.
10
Painting two or more coats with anticorrosive bitumastic Paint to give an even shade.
11
Applying priming coat with metal primer on new steel or iron work including preparation of surface.
12
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
13
Place Identification sign board 900x600mm rectangular as per IRC 67-2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . (a) Using high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 09 and as per IRC 67 2012
14
Scraping White wash & Colour Wash.
15
Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete
16
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
