Tender For Special Repair To Road Side Drain, Culvert & Hardstanding At Certain Places Of Hq Jl Wing, The Infantry School Under Ge Belgaum
Tender Overview
Project Description
Tender for Special Repair To Road Side Drain, Culvert & Hardstanding At Certain Places Of Hq Jl Wing, The Infantry School Under Ge Belgaum
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Precast RCC (1:2:4), Type B-1, using 20mm graded stone aggregate as in precast cover slabs, set in CM 1:4, with and including demolition of existing u/s cover slabs of any description, removing rubbish off the permises, complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately. |
| 2 | M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed. |
| 3 | M&L for Hardcore of gauge not exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 4 | M&L PCC 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in foundation, filling and mass concrete, with and including demolition of existing cement concrete [unreinforced] in ground floors and paving's n exc 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 5 | M&L for PCC 1:2:4 type B1 (using 20mm graded granite stone aggregate) as in surface channels and drains, with and including demolition of existing cement concrete [unreinforced] in ground floors and paving's n exc 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 6 | M&L for Reinforced cement concrete 1:2:4 type B-1 (nominal mix) using 20mm graded stone aggregate, as in foundations & walls for drain, including footings, or similar items etc., with and including demolition of existing drain foundation of any type, complete all as specified and as directed. |
| 7 | Steel formwork to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation / walls and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed. |
| 8 | M&L for Factory made Machine pressed pre-cast cement concrete interlocking paver block of any shape and size with glossy finish on top, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and pigment, with and laid over and including 50mm thick sand cushion (crushed stone sand / M sand) under interlocking paver block including watering and consolidation, with and including dismantling existing stone sett paving of any thickness, removing rubbish off the permises, complete all as specified and as directed. |
| 9 | M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed. |
| 10 | M&L for Preparation of new concrete surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and as directed. |
| 11 | M&L for Factory made Kerb Stone of PCC 1:2:4 type B1 (using 20mm graded stone aggregate) laid in position to the required line with necessary form work, jointed with CM 1:3, with and including making joints with or without grooves and making openings for drainage as required, with and including demolition of existing cement concrete of any description, complete all as specified and as directed. |
| 12 | M&L for Reinforcement TMT bars of Grade Fe–500D of 8mm to 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded, complete all as specified and as directed. |
| 13 | M&L for Reinforcement using TMT bars of Grade Fe-500D of 8mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified. Please Enable Macros to View BoQ information |
| 14 | M&L for Reinforcement using TMT bars of Grade Fe-500D of 8mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayBid Submission Deadline
Online submission via eProcurement portal.
TodayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender