|
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER,CHENNAI Name of Work: SPECIAL REPAIRS TO ROAD TOWARDS BAFFLE RANGE AND PROVISION OF ROAD NEAR ADYAR BR & ATA AREA TO LD STAND AREA AT OTA UNDER GE STM CHENNAI Contract No: CWE/STM/ OF 2026-27 Name of the Bidder/ Bidding Firm / Company : SCHEDULE 'A'(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of items Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for Scarifying or picking up gravelled,macadam or bituminous macadam in area exceeding 400 Sqm, depth not exceeding 50mm by using power machinery or by hand picking tools carefully without damaging existing road surface complete all as specified and directed. |
| 3 | M&L for repairs to potholes any depth, not exceeding 1 Sqm each including sweeping ,free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. by cutting around edges to at least 25mm in depth, making good by filling in with screened and graded road metal, watering and well ramming (including supply of road metal) etc.complete all as specified and as directed by Engineer- in- charge |
| 4 | M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying even coat of priming/tack coat with using paving bituminous primer any penetration at 10 kg per 10Sqm, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for premix Dense Bituminous Macadam (DBM), as in profile layer, with grading 2 of IRC laid in layers of 75mm or less (consolidated) thickness using 4.0% binder content (paving bitumen of grade VG-30 ) by weight of total mix ,obtained from computrised hot mix plant , spread, rolled and compacted to required camber and gradient by using mechanical sensor paver and rolled to a uniform, smooth surface using Tandem vibratory roller 8 to 12 tonne capacity complete all as specified and as directed |
| 6 | Note : (a) Premixed Dense Bituminous Macadam shall be as per MORTH specification (b) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (c) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only (d) The mix shall be designed by job mix formula and approved by GE. (e) ) Cost of mix design, testing charges, materials as required and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be admissible on this account. (f) Contractor quoted rate shall be for 4.0% binder content only .If the binder content shall be less than 4.0 % by weight of total mix, price adjustment shall be made for less bitumen at the rate of Rs 53/kg .However no price adjustment if the binder content shall be more than 4.0 % and no other claim whatsoever on this account shall be allowed and admissible |
| 7 | M&L for preparing existing black top surfaces of road by brushing with wire brush for removing caked mud etc, sweeping with gunny bags to remove all loose dirt etc. and applying evenly a tack coat with bitumen primer of paving bitumen of grade VG-10 at the rate of 5 kg per 10 sqm by using bitumen pressure spraying machine complete all as specified and as directed |
| 8 | M&L for Bituminous premixed semi dense asphaltic concrete (SDAC) ,40 mm consolidated thickness with 5.5 % binder content (by using paving bitumen of grade VG-30 ) in weight of total mix and filler of cement, content as per design mix (not less than 2%) spread by using mechanical paver, rolled and consolidated to required camber and gradient complete to a uniform surface by using Tandom Vibrator power roller 8 to 12 tonne capacity complete all as specified and directed |
| 9 | Note : (a) Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b) SDAC shall be as per MORTH specification (c) Laying shall be done by means of self-propelled mechanical paver, finishing with lectronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (d) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only (e) The mix shall be designed by job mix formula and approved by GE before incorporation. (f) Cost of mix design, testing charges, materials as required and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be admissible on this account. (g) Contractor quoted rate shall be for 5.5% binder content only .If the binder content shall be less than 5.5% by weight of total mix, price adjustment shall be made for less bitumen at the rate of Rs 53/kg .However no price adjustment if the binder content shall be more than 5.5% and no other claim whatsoever on this account shall be allowed and admissible |
| 10 | S&F solar cat eye aluminum alloy (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete all as per manufactures instructions and as directed. Make : Dark Eye , GREENS / GREENLITE or equivalent of makes as approved by CWE. |
| 11 | S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 type B1 using 20mm graded stone aggregate of size 150mm x150mm x300mm with necessary earth work excavationetc complete all as specified and directed. Make: Tata BP/Dark eye/Green Light/3M |
| 12 | M&L for preparing bituminous surfaces of road and applying 2.5 mm thick road marking (Retro reflective) paint as in centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads , pavements surfaces with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per Manufacturers instruction complete all as specified and directed. |
| 13 | S&F 600mm dia acrylic reflector round shape traffic safety convex mirror fixed on 1.8m heigh from ground level in mild steel post of length 2.25m and 50mm inner dia bore with wall thickness 3.65mm ,mild steel post embbeded in plain cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate, including digging of post holes of size 450x450x500mm in any kind of soil and steel surface painted with two or more coats of synthetic enamel paint of required shade, complete all as specified and directed.Make :- 3M/Darkeye or other equivalent approved by CWE .Note: Quoted rate shall be inclusive for necessary earth work excavaion,concrete etc as quired for fixing convex mirror |
| 14 | M&L for demolition of cement concrete of any description (unreinforced) in ground, floors and pavings not exceeding 15 cm thickness (below or above ground level) including removing off debries complete all as specified. |
| 15 | M&L for laying and compacting 150 mm thick (compacted thickness) Wet Mix Macadam (WMM) ,in two layers,each 75mm thick ,grading as pe table 400-13 of MORTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OOKN static weight and consolidating to required gradien and camber complete all as specified and directed.Note: The finished surface tolerances to be as per Table 900-1 of MORTH specifications for Road and Bridge works 2013 |
| 16 | M&L for machine pressed precast concrete interlocking paver blocks with grey cement and no pigments of approved design,shape,pattern and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade as in paving / foot path / hard standing etc ,made by table vibratory method using PU mould through vibrartory compaction by using plate vibrator , filling the joints with sand and cutting of paver blocks as required size and pattern, finishing and sweeping extra sand including with watering and consolidation complete all as specified and as directed. Note: Stone dust cushioning shall be measured and paid separately under relevant item. |
| 17 | M&L for stone dust filling under floor and cushioning to interlocking tile including watering and consolidation complete all as specified and directed .Note:Thickness shall be measured after punning. |
| 18 | M&L for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping,bands,plinth courses, kneelers, apex stones, bed plates, kerbs, water troughs,edging to paver block etc and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction. Note:- The Sign Board shall be prepared as per direction of Engineer-in-Charge. |
| 20 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil, complete all as specified and directed |
| 21 | Removing excavated soil to a distance exceeding 1.5 Km but not exceeding 5.0 Km and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed |
| 22 | Rolling and consolidating formation surfaces in cutting, exceeding 8 tonne and not exceeding 12 tonne complete all as specified and directed. |
| 23 | M&L for Soiling 150 mm thick (spread thickness) with broken stone boulders or quarried stone interstices filled, surface formed and rolled and consolidated to required gradient and camber with power roller 8 to 12 tonne capacity complete all as specified and directed. |
| 24 | M&L for WBM 150mm thick (compacted thickness) with coarse granite aggregate of grading (63 to 40mm size), in two layers of each 75mm thick, each layer spread, rolled and consolidated with power roller exceeding 8 tonne and not exceeding 12 Tonne capacity and consolidated to camber and gradient required complete all as specified and directed. |
| 25 | M&L for Moorum /Red bajri filling in road berms or paving laid in layers , spread thickness 450 mm, spread, levelled, rolled and consolidated to gradient and chamber required. including watering complete all as specified and directed. |
| 26 | M&L for preparing bituminous surfaces of road and applying 2.5 mm thick road marking (Retro reflective) paint as in centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads , pavements surfaces with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per Manufacturers instruction complete all as specified and directed. |
| 27 | S&F Solar Road Stud made of Aluminium composite body (of load capacity 20T) fixed with bright LED's 3 Nos (RED) on each side, providing 90-120 flashes per minute of size 125mm x 125mm x 25mm, Battery shall be of Li/cd, Item to be fixed on road surface using adhesive of self expanding screws as per Manufacturers instructions and as directed. Make: Tata BP / Dark eye / Green Light / 3m. |
| 28 | S&F of CAT's eyes of size 100mm x 100mm x 19.80mm, two sides acrylic plastic reflector of 3m make conforming to ASTM standards and fixed with epoxy / nail screws as per manufacturers instructions and as directed. |
| 29 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft /loose soil for erection of poles etc complete all as specified and as directed. |
| 30 | M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 31 | M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, as in foundations filling mass concrete complete all as specified and as directed. |
| 32 | M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate , 150 mm thick as in apron around culvert mass concrete complete all as specified and as directed. |
| 33 | M&L for brick work with sub class \\"B\\" bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified. |
| 34 | M&L for rendering 15 mm thick on fair faces of brick in cement mortar 1:4, finshed even and smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 36 | Returning filling in soil including spreading leveling watering well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed. |
| 37 | S&F reinforced concrete pipes of 600mm dia ,class NP2, laid and jointed complete with collars complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
