|
| 1 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 2 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 4 | Suspended floors, roofs, landings, balconies and access platform |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 6 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required |
| 10 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 11 | 12 mm cement plaster of mix : |
| 12 | 1:4 (1 cement: 4 coarse sand) |
| 13 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 14 | Providing and Fixing of GI Tank Nipple for fixing of tanks complete in all respects. |
| 15 | Providing and fixing of Single Phase Preventor including making wiring connection complete in all respect for entire satisfaction of EIC (SM 500 Single Phasing Preventor + Selectable Under Voltage + Selectable Over Voltage). Make: Minilac, L&T, BCH |
| 16 | Providing and fixing of contactor block complete in all respect i/c wiring, detection of fault by visiting site and making connection i/c control and power wiring complete in all respect with testing as per site requirement to the entire satisfaction of EIC. Make L&T, BCH, Schenider, Havells, Siemens. |
| 17 | MNX 32 |
| 18 | Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangement all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC Please Enable Macros to View BoQ information |
