|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All Kind of soil 70% |
| 2 | Ordinary rock 30% |
| 3 | Dispoal of surplus excavated earth by mechanical transport for lead upto 01Kms |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Random rubble stone masonry in with hard stone in foundation and plinth inluding supply and carriage of stone.Mud Masonary. 60% |
| 6 | Dry stone masonary. 40% |
| 7 | Back filling for R-wall with materail as available from rough cutting comprising of stone boulders, earth, kankar, shingle, etc including carriag complete. Stone filling. 30% |
| 8 | Rough filling. 70% |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including Hot finished welded type tubes |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including form work and carriage complete |
| 11 | Constructing vertical bunds with sloping faces, by boulder filling (dry, hand packed tightly); including cost of stones but excluding cost of wirecrates |
| 12 | Making knitted wire crates of approved mesh-size; including weaving, bindingsides and partitions, and binding top after filling; excluding cost of filling, stonesand weaving materials |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately) Second class teak wood |
| 14 | Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 15 | Dumping stone including cost of stones in Horizontal on level |
| 16 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size |
| 17 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 18 | Random rubble masonry with hard stone laid dry in foundation, plinth & walls Laid without bond stone |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level |
| 20 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 25 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and ift upto 1.5m. |
| 26 | Cement concrete flooring1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate |
| 27 | 20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 28 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand |
| 29 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 30 | Providing and applying white cement based putty of average thickness 1 mm ofapproved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 31 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats)over and including water thinnable priming coat with cement primer |
| 32 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 33 | French spirit polishing, Two or more coats on new works including a coat of wood filler . |
| 34 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600X600 mm |
| 36 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 37 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws |
| 38 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges (350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). |
| 39 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float Glass Panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). |
| 40 | Providing and fixing traditionally carved wood work (Shingstak) over doors andwindows including all accessories as per the direction of the Engineer in-charge, complete with; 2nd class kail wood |
| 41 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 42 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 125 mm |
| 43 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 44 | Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mmnominal thickness ofapproved shade, quality and make, made from rigid foamsheets (Single extruded) having density 601Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall besealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent havingnecessary screw holding capacity. Shutter shall be fixed to frame using approved hinges withnecessary stainless steel screws, all complete as per direction of Engineer-in-charge |
| 45 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 2.9.1 All kinds of soil |
| 46 | Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete. |
| 47 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 48 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 49 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 50 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer of approved make Cera,Somani,Hindware |
| 51 | Providing and fixing CP Brass telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 52 | Providing and fixinof superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357mm |
| 53 | Providing and fixing toilet paper holder. C.P. brass |
| 54 | Providing/laying and fitting of PPR pipes complete including cost of pipes and fittings.25mm |
| 55 | Providing and fixing C.P.brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15mm nominal bore. |
| 56 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank (Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license). |
| 57 | Providing and fixing CP jali trap of approved make |
| 58 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipesconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm |
| 59 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.Bend 87.5° 75 mm bend |
| 60 | 110mm |
| 61 | Providing and fixing 15mm nominal bore CP brass angle valve for basin mixer and geyser point of approved make conforming to IS 8931 of make Cera,Somany,Hindware |
| 62 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 63 | Providing and fixing PPR Unions PPR Union 25mm |
| 64 | Providing and fixing PPR Unions PPR Union 32mm |
| 65 | Providing and fixing geyser of required capacity of approved make all complete as per direction of the Engineer in-charge. 25 Litres |
| 66 | Providing and fixing ball valve (PPR) of approved quality complete. 25 mm nominal bore |
| 67 | 32 mm nominal size |
| 68 | Providing and fixing of insulation of water storage tank with k flex , polythene, glasswool, chicken mesh and covered with heat tracing wire, k flex, glass wool, chicken mesh and aluminum foil etc complete |
| 69 | Providing and fixing of material for the insulation of pipe with nitile tube tapping with cello taperock wool 6 inch per side wire mesh polythene tapping with cello tape aluminium sheet 26 guage cladding with dia complete job including carriage 19mm thick 50mm dia OD (PPR 32mm) |
| 70 | Providing and fixing of material for the insulation of pipe with nitile tube tapping with cello tape for inner wall fitting complete job including carraige 19mm thick 50mm dia OD (PPR 25mm) |
| 71 | Providing and fixing heat tape 33watt on PPR pipes made of denforced or chromelox or equivalent make as approved by engineer incharge complete job |
| 72 | High water pressure S.S geyser connection pipe (2 feet long) of approved quality and make. |
| 73 | Providing and fixing solar water heater of approved brand as per approved by engineer inchage all fitting and carraige complete job |
| 74 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 75 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 76 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 x 1.5 Sq.mm + 1 x 2.5 Sq.mm earth wire |
| 77 | 2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm earth wire |
| 78 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required for inverter.1x 1.5 sq.mm |
| 79 | 1 x 2.5 Sq.mm |
| 80 | Supplying and fixing following modular type switch/socket on the existing switch box cover including connections etc. as required.5/6 A switch |
| 81 | 3 pin 5/6 A socket outlet |
| 82 | 15/16 A switch |
| 83 | 6 pin 15/16 A socket outlet |
| 84 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 85 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 86 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos. 3 pin 5/6 amps modular socket outlet and 2nos 5/6 amps modular switch, connection etc. as required |
| 87 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required. |
| 88 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator16 way ( 4+24) Double Door |
| 89 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 6/16 amp. |
| 90 | Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 91 | Supply and fixing of 1.1 KV PVC insuated and PVC sheathed XLPE power cable of following sizes on surface/surface cable tray/0.16 m below ground level etc as required including carriage upto site of work.(Make as per annexure enclosed)3 core 16sqmm armoured. |
| 92 | Supplying & fixing following luminaries as required LL20-111-XXX-65NE3 wipro 10 watt LED concealed light fitting. equivalent make and model Philips/Crompton Greaves. |
| 93 | Supplying and fixing of 40 watt LED Street Light complete with GI pipe bracket duly embeded along the parapet /wall. Wipro LR02-132-XXX-57-G2 or equivalent approved make |
| 94 | Supply and fixing of exhaust fan 225 mm size shutter type including connection etc as required |
| 95 | CARRIAGE OF MATERIALS ( MECHANICAL TRANSPORT) Cement/Steel….............80 km |
| 96 | CARRIAGE OF MATERIALS ( MECHANICAL TRANSPORT) Sand/Stone Agg….............05 km |
| 97 | CARRIAGE OF MATERIALS ( MECHANICAL TRANSPORT) Stone….............05 km Please Enable Macros to View BoQ information |
