|
| 1 | Supply of Flushing Oil Limiter (Tag No. 22-LZ-3210) for Design, Engineering, Obtaining statutory approvals, Procurement, Fabrication, Inspection, Testing, Painting, Tagging, Documentation, Preparation for Shipment, Supply and Supervision of erection and commissioning of Flushing Oil Limiter (Tag Nos. 22-LZ-3210) including welded internals and external attachments, tube bundles, equipment supports, anchor bolts as applicable, all accessories, insulation with cladding as applicable, mechanical and electropolishing as applicable, commissioning spares, special tools & tackles, third party Inspection, etc. for EPCM 3 (P-25) PROJECT at IOCL PANIPAT REFINERY as specified in Material Requisition. |
| 2 | Flushing oil limiter (Tag No. 22-LZ-3210) |
| 3 | FOR ITEM NO. 1.01 of BoQ1 |
| 4 | Item 1 |
| 5 | Item 2 |
| 6 | Item 3 |
| 7 | Item 4 |
| 8 | Item 5 |
| 9 | Item 6 |
| 10 | Item 7 |
| 11 | Item 8 |
| 12 | Item 9 |
| 13 | Item 10 |
| 14 | Item 11 |
| 15 | Item 12 |
| 16 | Item 13 |
| 17 | Item 14 |
| 18 | Item 15 |
| 19 | Item 16 |
| 20 | Item 17 Flushing Oil Limiter - Addition Deletion Rates S. No. Description Addition / Deletion item For Shell Side Material For Tube Side Material Price List (To be filled by bidder) |
| 21 | Per Kg. basis for increase / decrease in Support / saddle height (as applicable) MOC – As per equipment datasheet |
| 22 | Change in Length of Pipes per Kg Basis (Seamless) MOC – As per equipment datasheet |
| 23 | Change in Length of Coils per Kg Basis (Seamless) MOC – As per equipment datasheet |
| 24 | Per Kg. basis for increase / decrease in Anchor bolts MOC – CS Hot Dip Galvanised As per MR |
| 25 | Rate per Kg for pipe support, platform & ladder clip MOC – CS As per equipment datasheet |
| 26 | Rate per Kg for Reinforced PAD for pipe support, platform & ladder clip etc. MOC – As per equipment datasheet |
| 27 | Per Kg. basis for increase / decrease in Platform structure / ladderMOC – CS Hot Dip Galvanised As per MR |
| 28 | Per Kg. basis for increase / decrease in Hand RailingMOC – CS Hot Dip Galvanised As per MR |
| 29 | Per Kg. basis for increase / decrease in GratingMOC – CS Hot Dip Galvanised As per MR |
| 30 | Itemwise rate for standard flanges, blind flanges (including gasket and nut bolt with blind) MOC - As per Material Requisition TABLE – 1 SCHEDULE OF RATES FOR ADDITION/DELETION OF NOZZLES (FLANGE ONLY) CS MOC (SS 304) AS PER EQUIPMENT DATASHEET Sr. No Nominal Size ASME B16.5 / ASME 16.47 SERIES B (Note 5) Remarks (Inch) Class 150 Class 300 Class 600 Class 900 Class 1500 Flange Blind Flange Flange Blind Flange Flange Blind Flange Flange Blind Flange Flange Blind Flange |
| 31 | 26” NOTES: 1. If overlay is applicable rates shall be quoted considering overlay on nozzles, flanges etc. 2. Type of flange shall be as per equipment datasheet. Material specification for Nozzle components such as Nozzle stiffener, studs, nuts and gaskets shall be as per Equipment datasheet. 3. Scope of supply of nozzle components shall be as per Equipment datasheet. 4. The rates quoted shall include supply of flange, studs, nuts and gaskets along with commissioning and Mandatory spares (when supplied with blind flange) and associated fabrication and testing. 5. ASME B16.47 Series B applicable for sizes above 24\\" TABLE – 2 SCHEDULE OF RATES FOR ADDITION/DELETION OF NOZZLES (FLANGE ONLY) CS MOC (SS 316) AS PER EQUIPMENT DATASHEET Sr. No Nominal Size ASME B16.5 / ASME 16.47 SERIES B (Note 5) Remarks (Inch) Class 150 Class 300 Class 600 Class 900 Class 1500 Flange Blind Flange Flange Blind Flange Flange Blind Flange Flange Blind Flange Flange Blind Flange |
| 32 | 26” NOTES: 1. If overlay is applicable rates shall be quoted considering overlay on nozzles, flanges etc. 2. Type of flange shall be as per equipment datasheet. Material specification for Nozzle components such as Nozzle stiffener, studs, nuts and gaskets shall be as per Equipment datasheet. 3. Scope of supply of nozzle components shall be as per Equipment datasheet. 4. The rates quoted shall include supply of flange, studs, nuts and gaskets along with commissioning and Mandatory spares (when supplied with blind flange) and associated fabrication and testing. 5. ASME B16.47 Series B applicable for sizes above 24\\" Please Enable Macros to View BoQ information |
