Tender For Constr Of Clp At Mmg Trg Area At Sw Div At The Inf School, Mhow And Addn/Altn To Bldg No Tsm-7 (Garrage) Under Ge (Mis) Mhow
Tender Value
33.93 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
3 days left
EMD
68000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constr Of Clp At Mmg Trg Area At Sw Div At The Inf School, Mhow And Addn/Altn To Bldg No Tsm-7 (Garrage) Under Ge (Mis) Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jun-2026 | BOQ Corrigendum | BOQ | 04-Jul-2026 |
| 2 | 23-Jun-2026 | Date Corrigendum1 | Date | 04-Jul-2026 |
| 3 | 19-Jun-2026 | Date Corrigendum | Date | 02-Jul-2026 |
| 4 | 19-Jun-2026 | Date Corrigendum | Date | 02-Jul-2026 |
| 5 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas not exc 1.50m deep and getting out soft/loose soil all as specified and directed. |
| 2 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc, exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 4 | Material & labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed. |
| 5 | M&L for Hard core of guage not exc 63mm, deposited, spread and levelled in layers N.Exc 15cm thick,watered and rammed to a true surface all as specified and directed. |
| 6 | M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and base of floor complete all as specified and directed. |
| 7 | M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) complete all as specified and directed. |
| 8 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with cement mortar (1:4) finished even & smooth.all as specified and directed. |
| 9 | M&L for machine pressed coloured precast concrete interlocking paver block (glossy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, laid over compacted dry sand and jointed with coloured cement slurry and pigment complete all as specified and directed.Note: Sand cushioning shall be measured and paid separately. |
| 10 | M&L for sand cushioning under floors including spreading, watering and consolidation complete all as specified and directed. |
| 11 | M&L PCC 1:3:6, type C1 using 20mm gd stone aggregate as in sub base of floor complete all as specified and directed |
| 12 | M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 13 | S&F only rolled mild steel section as in main and cross beam, hip and jack rafters,plates; purline where connected to common rafter and running rail and guides for sliding door;fixed with angle cleat or other connecting plates conforming to 410-W (Gde-E-250)quality A complete all as specified and directed. |
| 14 | S&F Pre-painted Galvalume/ Zincalume corrugated sheeting 0.50 mm thickness as in roof, etc, having crest depth 28-30mm at a pitch of 195-250 mm and having 2 ribs in between for addition strength fixed with zink coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap complete all as specified and directed. |
| 15 | M&L Machine cut Kota stone slab flooring 20 mm thick (+ 2mm) thick of with 58cm x 58cm in size (or nearest size as available in the market) laid over and including 25 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate and 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, incl rubbing and polishing to mirror finish rounding of edges, complete all as specified and directed. |
| 16 | M&L for kota stone slab 20 to 25 mm thick in skirting laid over and including 15 mm thick rendering in CM 1:4 and jointed grey cement slurry mixed with pidment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 17 | M&L and applying two or more coats of 100% premium acrylic emulsion paint light / dark having VOC less than 50gm/litre and UV resistance as per IS 15489:2004 on old/new surfaces of wall, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesand including priming coat of exterior primer to be carried out through air less spray machines complete all as specified and directed. |
| 18 | M&L 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection all as specified and directed. |
| 19 | M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 20 | M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 21 | M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as beams, cantilivers, brussemmers, lintels over 1.50m span complete all as specified and directed. |
| 22 | M & L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 23 | All as per item no 22 above Ditto, but 6mm to 10mm dia stirrups complete all as specified and directed. |
| 24 | M & L for Form work to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as specified and directed. |
| 25 | M & L for Form work to sides of columns and similar work with fair finished surface complete all as specified and directed. |
| 26 | M & L for Form work to sides of beams and soffit with fair finished surface complete all as specified and directed. |
| 27 | Demolition of dilapidated RCC as in slab, beams, chajjas & similar suspended work etc incl cutting of reiforcement and plastering the concrete surface with cement mortar 1:3 to match with existing old wall surface complete all as specified and as directed by Engineer-in-Charge. Note: All demolished/dismantled items shall be removed from Defence land as per dirns of Engr-in Charge. |
| 28 | M & L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 including dismantling old brick works complete as directed and specified. |
| 29 | Taking down cement or cement lime plaster on brick/stone/concrete surface walls or ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 30 | M&L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, mixing with liquid WPC complete all as specified.Note :- Water proofing compound shall be paid seperately. |
| 31 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 32 | M&L for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished on even and smooth without using extra cement as in ceiling, Chajja etc. complete all as specified and directed. |
| 33 | M&L preparation of new plastered surface and apply two coat of cement based paint over a coat of white wash complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of primer white or tinted complete all as specified and directed. |
| 35 | M&L applying three coats of white wash on new Ceiling,chajja surface including preparation of surface complete all as specified and directed. |
| 36 | Supply only Liquid Water proofing compound all as specified and directed.. |
| 37 | M&L for preparation of old surfaces of wall by scrapping (any No of layers), washing,rubbing down, and stopping of distempered and apply two coats of oil bound distemper white or tinted complete all as specified and directed. |
| 38 | M & L preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unplastered surfaces including cornices, pilasters etc and apply two coat of white wash complete all as specified and directed. |
| 39 | M&L preparation of old plastered surface and apply two coat of cement based paint complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L cement concrete 100mm thick type D-2, (1:4:8) using 40mm graded stone aggregate as in subbase etc. complete all as specified and directed. |
| 41 | M&L stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 mm thick complete all as specified and directed. |
| 42 | M & L 80mm thick Machine pressed precast concrete interlocking paver block fixing with grey cement and pigments of \\" I \\" shape or as approved by GE, and any colour and size confirming to IS 15658-2006 of M-40 Grade set, laid over 50 mm (average) thick dust sand cushioning, filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engineer-In-charge including packing of sides by cement concrete finishing surface even and smooth complete all as specified and directed. Note: Sand cushioning shall be measured and paid seperately. |
| 43 | S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410 -W (Gde-E- 250) quality A complete all as specified and directed. |
| 44 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 45 | S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as specified and directed at site. |
| 46 | M&L preparation of new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender