Tender For Constr Of 01 X Toilet For Offrs & 01 X Toilet Block For Jcos, Or & Students Alongwith Water Supply And Allied Services At Hffr At The Inf School, Mhow
Tender Value
32.99 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
2 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constr Of 01 X Toilet For Offrs & 01 X Toilet Block For Jcos, Or & Students Alongwith Water Supply And Allied Services At Hffr At The Inf School, Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Jun-2026 | BOQ Corrigendum | BOQ | 04-Jul-2026 |
| 2 | 22-Jun-2026 | Date Corrigendum1 | Date | 04-Jul-2026 |
| 3 | 19-Jun-2026 | Date Corrigendum | Date | 02-Jul-2026 |
| 4 | 19-Jun-2026 | Date Corrigendum | Date | 02-Jul-2026 |
| 5 | 04-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and avaraging 15cm deep and getting out in soft/loose complete all as specified and directed. |
| 2 | Excavating over areas, n exc 1.50 m deep and getting out in hard/dense soil complete all as specified and directed. |
| 3 | Excavation in trenches n.exc 1.50 m wide and n.exc 1.50m depth: for foundation, etc or for shafts,wells cesspits, manholes, pier holes, etc N.exc 10Sqm on plan & N.exc 1.50m in depth & getting out in hard/dense soil complete all as specified and directed. |
| 4 | M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 5 | M&L for moorum/Red bajri filling in floor or paving laid in layers n.exc 15cm thick spread,levelled and rammed including watering complete all as specified and directed. |
| 6 | Removing excavated material exc 50m but n exc 100m and depositing where directed complete all as specified and directed. |
| 7 | Formwork to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as specified and directed. |
| 8 | M&L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 9 | Form work to sides of columns and similar work with fair finished surface complete all as specified and directed. |
| 10 | M&L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 11 | Form work to sides of beams and soffit with fair finished surface complete all as specified and directed. |
| 12 | M&L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in beams, cantilivers, brussemmers, lintels over 1.50m span complete all as specified and directed. |
| 13 | Formwork to sides and soffits of slab such as roof slab,floor slab,landing and similer work,etc not exceeding 200mm thick with rough fnished surface of concrete flat complete all as specified and directed. |
| 14 | M&L for RCC M-25 (Design Mix) using 20mm graded stone aggregate as in slab supported on wall, landings, beams canopies, deck slabs and shelves etc. complete all as specified and directed. |
| 15 | S&F 10mm dia and over mild steel TMT bars cut to length bent to shapes as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 16 | All as per item No 15.00 above but 6mm to 10mm dia but as in stirrups complete all as specified and directed. |
| 17 | M&L for Hard core of guage not exc 63mm, deposited, spread and levelled in layers not exc 15cm thick,watered and rammed to a true surface all as specified and directed. |
| 18 | M&L for brick work with flyash brick with using modular size brick, straight or cured on plan exc 6m mean radius built CM 1:6 complete as specified and directed. |
| 19 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub-base, to floor etc complete all as specified and directed. |
| 20 | M&L for PCC 40mm thick cement concrete type B-0 1:2:4(using 20mm graded stone aggregate) as in floor as per leveling course complete all as specified and directed. |
| 21 | M&L for screed bed or bedding layer 20mm thick for laying floor tiles in cement mortar 1:6 finished even and rough complete all as specified and directed. |
| 22 | M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (Square/Rectanguler ) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 23 | M&L for Glazed ceramic tiles glossy series digital wall tile 300X450mmX7mm thick coloured on vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match over and including 10mm thick rendering of CM 1:4 complete all as specified and directed. |
| 24 | M&L for rendering 15 mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:6 for finished even and smooth (without using extra cement) complete all as specified and directed. |
| 25 | M&L for rendering 15 mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:4 using using water proofing compound @ 200 ml by weight of cement per bag for finished even and smooth ( without using extra cement) ( WPC will be measured and paid separately) complete all as specified and directed. |
| 26 | Supply only liquid water proofing compound complete all as specified and directed. |
| 27 | M&L for rendering 10mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 28 | M&L for preperation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 29 | M&L for 75 mm thick PCC 1:3:6 mix type C2 (using 40mm graded stone aggregate) as in plinth protection and paving finishing concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 30 | S&F Powder coating anodised aluminium ventilator with louvers/fixed glass and glass stay, wire mesh ouer with side cleats, setion weighing 0.55Kg/m incl necessary joining cleats, glazing clips for fixing of wiremesh,rubber neoprene packing,anodised aluminium snap beading screws etc.(minimum thickness of powder coating 50micron) complete all as specified and directed. |
| 31 | S&F mild steel framed work for door frames, window grills, gratings, guard bars and similar works, manufactured from mild steel conforming to Fe 290 Grade E-165, including cutting, straightening, bending, shaping, shouldering of bar ends, drilling, welding and/or riveting, assembling, fitting and fixing in position, complete with all necessary fixtures, fasteners as specified and as directed by the Engineer-in-Charge. |
| 32 | S&F mild steel plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 33 | S&F Solid PVC Door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinfourced with M.S Square tube, as per specification complete all as specified and directed. |
| 34 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 35 | S&F mild steel butt hings medium weight 75 mm long complete all as specified and directed. |
| 36 | S&F Aluminium handle cast type, anodised size 150mm long, D type complete all as specified and directed. |
| 37 | S&F Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and directed. |
| 38 | S&F 100mm size mild steel butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed. |
| 39 | S&F mild steel 300mm sliding door bolt with hesp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 40 | S&F PVC Pipes 110mm dia bore single socketed,in any length with rubber ring joints, laid in floors complete all as specified and directed. |
| 41 | S&F PVC (SWR) bends any radious 110mm complete all as specified and directed. |
| 42 | S&F PVC (SWR) 110mm bore juction single, (Single T) equal or unequal complete all as specified and directed. |
| 43 | S&F 75mm dia PVC (SWR) multi floor trap.plain with grating including jointing with solvent cement complete all as specified and directed. |
| 44 | S&F 100X100mm size Salt-glazed stoneware gully trap, square or round mouthed, type P complete all as specified and directed. |
| 45 | S&F PVC Pipes 75mm bore single socketed, in any length rubber ring joints, laid in floors complete all as specified and directed. |
| 46 | S&F PVC (SWR) 75mm bore bends complete all as specified and directed. |
| 47 | S&F PVC(SWR) 75mm bore juction single (Single T) equal or unequal complete all as specified and directed. |
| 48 | S&F CPVC pipes SDR 11 fittings in trenches/wal with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm complete all as specified and directed. |
| 49 | S&F CPVC pipes SDR 11 fittings in trenches/wall with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 25mm complete all as specified and directed. |
| 50 | S&F 20mm dia Gun metal valve globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 51 | S&F rotational moulded polythylene water storage tanks(double layer), 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed. |
| 52 | S&F 'P' or 'S' trap for EWC complete all as specified and directed. |
| 53 | S&F vitreous china wash down water closet pan, pedestal pattern, white colour, including all necessary accessories for proper installation and connection, complete in all respects, as specified and as directed by the Engineer-in-Charge. Note: The item excludes flushing cistern and flush pipe. |
| 54 | S&F 15mm bore chromium plated two way tab with flange fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, scrwed both ends for iron pipe or for unions complete all as specified and directed. |
| 55 | S&F 15mm bore chromium plated health fucet including flexible pipe 1.00 Mtr long wall mounted and brass CP nuts complete all as specified and directed. |
| 56 | S&F PVC valve less symphonic action type flushing cistern 10 Ltr capacity low level white.with inlet ball valve float and handle incl brackets complete all as specified and directed. |
| 57 | S&F Vitreous china urinal half stall white coloured with urinal spreader of CP for fixing with 15mm dia pipe,( Minimum weight 60 Gms) including providing and fixing CP spreader, plugs ,beding urinal against wall in cement mortar 1;2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with spreader, flush pipe,grating and union for discharge pipe (Excluding of fxing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 58 | S&F urinal partition made of HPL board, 10 to12 mm thick, of minimum size 900 mm × 400 mm, including cutting, edge finishing, drilling, and fixing with stainless steel brackets, screws, fasteners and all necessary fittings/accessories, complete in position and in all respects, as specified and as directed by the Engineer-in-Charge. |
| 59 | S&F white vitreous china counter top wash basin of minimum size 550 mm × 400 mm, including waste coupling, cutting and fitting in counter, sealing, connection to waste outlet, all necessary fittings, accessories, labour, tools and tackles, complete in all respects, as specified and as directed by the Engineer-in-Charge. |
| 60 | S&F 15mm dia swan neck piller taps fancy type,cast copper alloy,with capstain heads,chromium plated screwed down high pressure,with or without lettered 'HOT' or 'COLD\\" with long screwed shanks and fly-nuts screwed for iron complete all as specified and directed. |
| 61 | S&F PVC waste pipe for wash hand basin/Urinals complete all as specified and directed. |
| 62 | S&F for PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 63 | S&F long bevelled edge mirror of selected quality glass mounted on 6mm thick AC building borad or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 64 | S&F for granite (of any type) tiles 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 65 | S&F CP Fancy type Angle cock one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified and directed. |
| 66 | S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle,fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. |
| 67 | S&F brass chromium plated tubuler towal rail,20mm dia D type 60cm long between flanges complete all as specified and directed. |
| 68 | S&F sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 69 | S&F CP Grating doom 125mm dia with or without hole chromium plated complete all as specified and directed. |
| 70 | S&F LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified and directed. |
| 71 | M&L for rendering 10mm thick in cement mortar 1:3 as on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 72 | M&L for applying an even tack coat of industrial bitumen 25/85 at the rate of 1.20 kg per square metre over a surface previously treated with bituminous primer, including cleaning and preparing the surface, heating and spraying/application of bitumen uniformly to the required coverage, complete in all respects, as specified and as directed by the Engineer-in-Charge. |
| 73 | M&L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick, reinforced with polyester non-woven fabric having a weight not less than 150 g/sqm, laid over a properly prepared and primed surface by torch application, including heating, overlapping of joints as per manufacturer's specifications, sealing of laps, finishing, and all necessary materials complete in all respects complete as specified and as directed by the Engineer-in-Charge. |
| 74 | M&L for Applying two coat of bitumen based aluminium painting over a coat of primer on water proofing treatment with preparation of surfaces as on non assesable area complete all as specified and directed. |
| 75 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty 1mm thick with preparation of newly plaster surface of wall complete all as specified and directed. Please Enable Macros to View BoQ information |
| 76 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty 1mm thick with preparation of newly plaster surface of wall complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender