|
| 1 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters without taking off shutters from frame complete all as specified and directed. |
| 2 | S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of m.s tubes for top & bottom rails m.s frame shall be covered with heat moulded plain colour pvc 'c' channel having a pvc sheet strip of 20mm width struk inside with salvent cement for stiles and plain colour pvc sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour pvc sheet to be fitted in the m.s frame welded / sealed to the stiles & rails with suitable pvc sheet beading , and joined togeather with salvent cement , suppling & fixing in the frame at site as per soecification & drawing complete all as specified and directed. |
| 3 | S&F solid pvc door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with m.s square tube , suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 4 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed. |
| 5 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp?ressive strength of58N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed. |
| 6 | S&F 35 mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 7 | S & F 35 mm thick factory made glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauge etc [without sash bars] edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters shall be as specified in SSR Part-I, Section 8, Clause 8.24 (a) supplied and fitted to chowkat complete all as specified and as directed. |
| 8 | S & F in repairs of rubber beading etc to entrance doors to arrest entry of insects etc complete all as specified and as directed. |
| 9 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 10 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified and directed. |
| 11 | S&F 100 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 12 | S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 13 | S&F 100 mm long medium weight,stain less steel butt hinges complete all as specified and directed. |
| 14 | S&F 125 mm long medium weight,stain less steel butt hinges complete all as specified and directed. |
| 15 | S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed. |
| 16 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 17 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 18 | S & F 300mm Mild Steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.[Ground floor to 10th storey] complete all as specified and directed. |
| 20 | Resecuring or easing and adjusting without taking down shutters of any description not exc 1sq.m. Each complete all as specified and directed. |
| 21 | Resecuring or easing and adjusting without taking down shutters of any description exceeding 1sq.m. but not exceeding 2sq.m. complete all as specified and directed. |
| 22 | Refixing of shutters of any description n exc 1 sq. m each in same openings complete all as specified and directed. |
| 23 | Refixing of shutters of any description exc 1 sq. m and n.exc 2 sqm each in same openings complete all as specified and directed. |
| 24 | M&L for antitermite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same® complete all as specified and directed. |
| 25 | Demolition of Brickwork or stone/bou-lder masonry, built incement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 26 | M&L for Brickwork with fly ash bricks modular bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 27 | Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.(Note: Necessary scfolding , safety belts as required for plastering work at any height to be provided by the contractor without any extra cost to the Government ) . |
| 28 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note: Water profing compound to be measured and paid separately.) |
| 29 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 30 | M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed. |
| 31 | M&L Powder Coated aluminium three track sliding window with using standard medium weight sections of approved make, with jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle / locking arrangement (1No.) per shutter, complete all as specified and directed. (Note: Glazing and Wire mesh shall be measured and paid separately.) |
| 32 | S&F Aluminium alloy wire mesh 0.45 mm nominal dia of wire and average widh of aperture 1.40mm and fixed with aluminium wire staple complete all as specified and directed. |
| 33 | S & F 5.5 mm thick, plain sheet glass, ordinary quality and glazing with rubber beading in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 34 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 35 | Repairs to existing alluminum window shutters by tightneing of joints by nuts and bolts wherever required including renewal of worn out hings, handles, rollers, clips, beading etc complete all as specified and directed. |
| 36 | S&F 18 to 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and providing with 6mm thick teakwood lipping alorund all as specified and as directed. |
| 37 | Diamantling Framed work timber scantings 40 sqcm and over in section, in any position complete all as specified and directed. |
| 38 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 39 | S&F factory made ready to install non toxic-lead & cadmium free, single extruded 3 side prelam Solid (non hollow) PVC door frame (single rebeated) of size 75x50mm it should be winer proat, bermite proof. Sre retardent and with excelent scriw holding capacity Mired cut at two comers and joined with MS Screws on each side The sold PVC door frame shall be fixed to the existing wall using (10x100mm) long MS screws to through the frame by using PVC fastners minimum of 4nos of MS screws to be provided for each vertical post and minimum of 2 nos of MS screws to be provided to horizontal members(head & bottom frame) complete all as specified and directed. |
| 40 | S & F Factory made ready to install Non-Toxis, Lead & Cadmium free, single extruded Water proof, termite proof, fire retardant, excellent screw holding capacey, Solid PVC Boards 18mm thick of White Colour as in Cupboard Shelves fixed to pvc guide Rails with stanless steel screws complete at as specified as directed |
| 41 | S&F Factory made ready to install Non-Toxic Lead & Cadmium hos siggle Sam extruded, Water proot, termbe proof, fire retardant, excellent screw holding. capacity Solid PVC Boards, 18mm thick, One Side Decorative Choice Lamination and other side Balancing White as in Cupboard Shutters fixed to Door Frame with and including Continuous (Piano) Hinges Stainless Steel Bright finish or Electrogalvanised and width of Flaps 40mm [When Open) and stanless steel screws complete all as specified as directed |
| 42 | S&F in repair stainless Steel Curtain Rod of 25 mm dia including Stainless Steel Brackets of size sutable to 25mm dia curtain rod as in Coat Hanger complete all as specified as directed |
| 43 | S&F in repair 150 mm long designer SS pull handles with fixing accessories of standard Each grade for cup board shutter complete all as specified and as directed |
| 44 | S&F in repair 100 mm long designer SS pull handles with fixing accessories of standard Each grade for cup board shutter complete all as specified and as directed |
| 45 | S & F Magnetic Catches with Striking Plate, First quality suitable for Cupboard Each shutters complete all as specified and as directed. |
| 46 | S&F Width of flaps (when open) in 4mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 47 | S&F 100mm Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 48 | M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) in bed blocks etc., including necessary form work complete all as specified and directed. |
| 49 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 50 | M&L for preparation of newly plastered wall surface and applying two coats of distemper oil emulsion over a coat of primer over 1mm thick wall care putty [any number of coats required] complete all as specified and directed. (Note :- Distempering work shall be carried out acoording to Smart Painting procedure mentioned in PS) |
| 51 | M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 52 | S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed. |
| 53 | Cutting holes into or through brick walls built in mud mortar and making good in cement mortar1:3 or cement concrete 1:2:4 type B-l as required n exc 150 Sq Cm complete all as specified and directed. |
| 54 | Taking down shutters exc 1 Sqm and n exc 2 Sqm Each complete all as specified and directed. |
| 55 | Taking down shutters exc 2 Sqm Each complete all as specified and directed. |
| 56 | S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive trength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body hreaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges with S S screws shall be paid separately) complete all as specified and directed. |
| 57 | M & L for Granite floor strips coloured of 18 to 25mm thick , width not exceeding 10cm for the door cills fixed with approved quality adhesive complete all as specified and as directed. |
| 58 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 59 | S & F in reapir Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 60 | S & F in repair stainless steel sliding / telescopic channel of length 400mm with 03 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45mm with and including necessary fixing arrangement complete all as specified and directed. |
| 61 | S&F in repair cupboard latches complete all as specified and directed |
| 62 | S&F in repair patch fittings suitable for glass door/glass partition complete all as specified and directed Please Enable Macros to View BoQ information |
