|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF), Air Force Station, Phalodi Name of Work :REPAIR TO FLOOR, WALL, JOINERY ETC IN CENTRAL INSTITUTES IN DOMESTIC AREA AT AF STN PHALODI. Contract No: GE (AF) PHALODI/ OF 2026-27 Serial Page No. Bidder Name : REVISED SCHEDULE 'A'(BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT TEXT # NUMBER TEXT NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER NUMBER # TEXT Srl.No. Item Description Item Code / Make Approx No of Units reqd Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) not exc. 1.5 sqm each. Complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 sqm but n. exc 4 sqm each. Complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specified and directed. |
| 5 | Dismantling stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortarts. Complete all as specified and directed. |
| 6 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets. Complete all as specified and directed. |
| 7 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. incl raking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed. |
| 8 | Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site Complete all as specified and directed. |
| 9 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles. Complete all as specified and directed. |
| 10 | M&L for Pre-cast cement concrete block masonry type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, Complete all as specified and directed. |
| 11 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20 mm thick cement screed bed in CM 1:6, Complete all as specified and directed. |
| 12 | M&L for machine cut kota stone slab 20-25mm thick in skirting, risers of steps, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick cement plaster in CM (1:4) Complete all as specified and directed. |
| 13 | M&L for 25 mm thick PCC (1:2:4) type B-1, using 20 mm graded stone aggregate as in leveling course Complete all as specified and directed. |
| 14 | M&L for non-skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. |
| 15 | M&L for vitrified Ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:6 Complete all as specified and directed. |
| 16 | All as per item No.14 above, but in vertical surfaces as in skirtings, including backing coat 10 mm thick in CM 1:3 Complete all as specified and directed. |
| 17 | M&L for glazed ceramic coloured joint free tiles in vertical surfaces 1200x600x8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl backing coat of 10 mm thick in CM 1:3 Complete all as specified and directed. |
| 18 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65mm x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Complete all as specified and directed. |
| 19 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws Complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type 30mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, divided into squares edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified and supplied and fitted to chowkats and Comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 21 | M&L for anodised aluminium powder coated of any colour frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 22 | S&F for anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. Complete all as specified and directed. |
| 23 | S&F for anodised aluminium powder coating of any colour window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and directed. |
| 24 | S&F in repair anodised powder coating of any colour aluminium partition fixed type made from 101.60mm x 44.45mm x 1.5mm thick section fully glazed incl all necessary jointing cleat, glazing plate and clips, rubber, gasket packing, snap beading with 5.50mm thick glass tinted complete all as specified and as directed. |
| 25 | S&F for printed /etching 12mm thick toughened glass door with all necessary hydraulic floor spring incl top patch, bottom patch and 30cm long stainless steel handle set and central stainless steel lock including taking out old broken/ unservicable glass complete all as specified and as directed . |
| 26 | S&F in replacement for Stainless steel type 304 for railing as per Drg No. CEAG/AR/TD-13R fixed complete all as specified and as directed . Note: Length of SS railing shall be measured in Rm for the payment purpose. |
| 27 | S&F solar control film 50 micron reflective type exc 1.50 sqm, sticked to glass panes as per instruction of manufactures Complete all as specified and directed. |
| 28 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50mm x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Complete all as specified and directed. |
| 29 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, Complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 30 | S&F 100mm size of mild steel butt hinges, medium weight, cold rolled . Complete all as specified and directed. |
| 31 | S&F Alumininum anodised, barrel tower bolts of extruded section 200 mm size. Complete all as specified and directed. |
| 32 | S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long. Complete all as specified and directed. |
| 33 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed Length of bolt 300mm. Complete all as specified and directed. |
| 34 | S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple, beads on any type of door/windows Complete all as specified and directed. |
| 35 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Complete all as specified and directed. |
| 36 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wdn beads in square n.exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames. Complete all as specified and directed. |
| 37 | S&F Sheet glass 4mm thick, ordinary quality and glazing with oil putty/wdn beads in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames Complete all as specified and directed. |
| 38 | S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/ beads in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames Complete all as specified and directed. |
| 39 | S&F Sheet glass 4mm thick ordinary quality and glazing with beading in squares n.exc 0.5 Sq.m in each pane Complete all as specified and directed. |
| 40 | S&F Sheet glass 5.5mm thick ordinary quality and glazing with beading in squares exc 0.5 Sq.m in each pane Complete all as specified and directed. |
| 41 | M&L for 18-20 mm thick white makrana marble work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble including cement screed 15 mm thick in CM 1:4 complete all as specified and directed. |
| 42 | M&L for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM 1:4 Complete all as specified and directed. |
| 43 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cement screed 15 mm thick in CM 1:4 Complete all as specified and directed. |
| 44 | M&L for Rounding to edges of granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations Complete all as specified and directed. |
| 45 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded agg) as in sub base. Complete all as specified and directed. |
| 46 | M&L for sand filling under floors including spearding and levelling in layers n exc. 25 cm thick, watering and consolidation Complete all as specified and directed. |
| 47 | M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete with grey cement and pigment complete all as specified and directed . |
| 48 | S&F 605mm X 605mm anodised aluminium snap grid frame work for false ceiling using main tee of size 25mm x 35mm x 1.5mm & cross tee of size 25mm x 35mm x 1.5mm, aluminium anodised angle section 25mm x 35mm x 1.5mm including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40mm x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long Complete all as specified and directed. |
| 49 | M&L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions Complete all as specified and directed. |
| 50 | M&L for POP false ceiling with 12mm thick 1200mm x 2400 mm gypsum sheet with Gypsum binder fixed on 6mm thick particle board with galvanised iron at 20x20x27 gauged galvanised section fixed at interval not more than 750 mm C/C and intersection of 20x43x27 gauge galvanised section note more than 450 mm centre to centre. Suspended/screws from roof, all as true line and level, preparation of surfaces with POP and primers, sanding the surface till smooth surface is obtained and finally applying two coat of oil bound distemper paint (mat finish) over one coat of primer Complete all as specified and directed. . Note: Pattern/design/colour of ceiling to be approved by GE. |
| 51 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing. Complete all as specified and directed. |
| 52 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing Complete all as specified and directed. |
| 53 | S&F WPC fluted wall panelling of 15mm thick with and including frame work for fixing fluted wall panelling to wall complete as per manufacturers instructions and complete all as specified and directed . Note: Pattern/colour of fluted wall panel to be approved by GE. |
| 54 | S&F in repairs cast iron door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed Complete all as specified and directed. |
| 55 | S&F in repairs double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed Complete all as specified and directed. |
| 56 | S&F in repairs stainless steel curtain rod 25mm dia (minimum weight 0.36 Kg/RM) with brackets, fancy knobs and stand etc Complete all as specified and directed. |
| 57 | M&L for preparing surfaces of wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying sealer wherever required to fill and smooth the surface including applying two coats of melamine polish with spray machine uniformingly upto glossy mirror finish Complete all as specified and directed. |
| 58 | M&L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement. Complete all as specified and directed. |
| 59 | M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces as in ceiling and finished even and smooth with out using extra cement complete all as specified and as directed. |
| 60 | M&L for Preparation of new plastered surfaces and applying two coat of oil bound distemper over one coat of primer with 3mm thick wall care putty to achieve smooth finish on internal surfaces of walls. Complete all as specified and directed. |
| 61 | M&L for Complete removal of existing treatment on walls and applying two coats of oil bound distemper over one coat of primer with 3mm thick wall putty to achieve smooth finish on internal surfaces of walls. Complete all as specified and directed. |
| 62 | M&L for Preparation of new plastered surfaces and applying two coat of oil bound distemper over one coat of primer with 3mm thick putty to achieve smooth finish on ceiling surfaces. Complete all as specified and directed. |
| 63 | M&L for Complete removal of existing treatment on ceiling and applying two coats of oil bound distemper over a coat of primer with 3mm thick putty to achieve smooth finish Complete all as specified and directed. |
| 64 | S&F in repair floor mounted coupled closets (EWC with flushing cistern, seat cover) fixed in repair complete all as specified and directed . |
| 65 | S&F in repair table top wash hand basin fixed complete all as specified and directed. |
| 66 | S&F in repair vitreous china urinal, full stall type, white incl flush pipe, waste pipe, brackets, CP sprader fixed complete all as specified and directed . |
| 67 | S&F in repair towel rack with lower hanger of stainless steel fixed complete all as specified and directed . |
| 68 | S&F in repair 3 in 1 wall mixer with provision of both hand shower and over head shower fixed complete all as specified and directed . |
| 69 | S&F in repair stainless steel Soap Dish fixed complete all as specified and directed . |
| 70 | S&F in repair toilet paper holder brass chromium plated fixed complete all as specified and directed . |
| 71 | S&F in repair Corner glass Shelves (with brackets) for bath room fixed complete all as specified and directed . |
| 72 | S&F in repair Brass chromium plated wash basin Mixer fixed complete all as specified and directed . |
| 73 | S&F in repair brass chromium plated Swan neck fancy type pillar taps of 15 mm bore fixed all as specified and directed . |
| 74 | S&F in repair 15mm Bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed . Complete all as specified and directed. |
| 75 | S&F in repairs 15mm bore angle valves, fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union Complete all as specified and directed. . |
| 76 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position. Complete all as specified and directed. |
| 77 | S&F in repair rimless wall hung EWC of white colour size 390 x570x 365 with UF soft close seat cover, hinges, accessories set, Complete all as specified and directed. . |
| 78 | S&F in repair metropole flush valve dual flow 40mm size (concealed body) with exposed shut off provision (3.00/6.00 ltr per flushing, including drain Pipe Connection Set complete all as specified and directed. |
| 79 | Supply and laying in repair 40 mm Outer Dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors and is jointed with CPVC solvent cement only (incl elbow, tee, socket, reducer, bushing, step over bends, end cap, end plugs etc) conforming to IS 15778 complete all as specified and as directed. |
| 80 | Supply and laying in repair 32 mm Outer Dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors and is jointed with CPVC solvent cement only (incl elbow, tee, socket, reducer, bushing, step over bends, end cap, end plugs etc) conforming to IS 15778 complete all as specified and as directed. |
| 81 | Supply and laying in repair 20 mm Outer Dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors and is jointed with CPVC solvent cement only (incl elbow, tee, socket, reducer, bushing, step over bends, end cap, end plugs etc) conforming to IS 15778 complete all as specified and as directed. |
| 82 | Supply and laying in repair 15 mm Outer Dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors and is jointed with CPVC solvent cement only (incl elbow, tee, socket, reducer, bushing, step over bends, end cap, end plugs etc) conforming to IS 15778 complete all as specified and as directed. |
| 83 | S&F in repair 40 mm nominal size of stop valves (ISI marked) cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for CPVC pipe or for unions complete all as specified and directed. |
| 84 | S&F in repair 20 mm nominal size of stop valves (ISI marked) cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for CPVC pipe or for unions complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
