|
| 1 | M & L for rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement, including taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.and applying two coat of interior grade 1mm wall readymade putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of Acrylic distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge. |
| 2 | M & L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 with WPC finished even & smooth without using extra cement including taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc and two coat of cement base paint over a coat of alkali resistant cement primer on newly plastered surface including preparation of undecorated surface complete all as specified and as directedNote: (i) The rate includes the liquid water proofing compound of Make Dr Fixit/Fosroc/BASF/STP(ii) The Qty of WPC as per manufactures instruction. |
| 3 | M&L rendering 10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement including taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc and including preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling. |
| 4 | Complete removal of existing treatment and preparing old surface of steel of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as directed and specified.Make : Asian Paints/Berger/Nerolac |
| 5 | M&L for preperation of old wooden surface and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer -in -charge. |
| 6 | Complete removal of existing treatment of any type/description from external/internal/ceilings surfaces/walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder complete all as specified and directed. |
| 7 | Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 8 | Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall /ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) . |
| 9 | Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using spray gun to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality].Make of Exterior Emulsion : Asian (APEX) / Berger (WEATHER COAT ANTI DUST) / Nerolac (EXCEL TOTAL) . |
| 10 | M & L for Double charged Coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement and sand screed (1:6) including dismantling of old tiling including cement mortar bedding backing and rubbish off the permices. complete all as specified and directed by Engineer - in - Charge. |
| 11 | Ditto all as above but as in skirting over 10 mm cement mortar backing ( 1:3). |
| 12 | S&F glazed ceramic coloured tiles joint free 350x250x7mm/450x300x7mm square or rectanguler as on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 including dismantling of old tiling including cement mortar bedding backing and rubbish off the permices. complete all as specified and directed by Engineer - in - Charge. |
| 13 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 including dismantling of old tiling including cement mortar bedding ( but not backing) and rubbish off the permices. complete all as specified and directed by Engineer - in - Charge. |
| 14 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile not exceeding 0.36 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 including dismantling of old tiling including cement mortar bedding ( but not backing) and rubbish off the permices. complete all as specified and directed by Engineer - in - Charge. |
| 15 | Ditto all as above but as in skirting over 10 mm cement mortar backing coat ( 1:3) complete all as specifed and directed. |
| 16 | M&L Endura Non skid ceramic coloured /printed tiles/Parking tile 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.08 sqm but n. exc, 0.18 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 including dismantling of old tiling including cement mortar bedding backing and rubbish off the permices. complete all as specified and directed by Engineer - in - Charge. complete all as specified and directed by Engr in Charge. |
| 17 | M&L cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate as in floors 25 mm thick all as specified.& directed by Engineer -in-charge.. |
| 18 | M&L 15-18mm thick granite (of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window/door cills, cooking platforms and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary moulding and incl 15 mm th screed bed in CM 1:6 or 10mm thick rendering in CM 1:4 as required and removing of old broken stone slab directed by Engineer in charge. |
| 19 | M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window/door cills, cooking platforms and like in in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary moulding and incl 15 mm th screed bed in CM 1:6 or 10mm thick rendering in CM 1:4 as required and removing of old broken stone slab directed by Engineer in charge. |
| 20 | Disconnecting existing tanks of (exc 500 &1000 litres in capacity), setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting, Cleaning and removing all scale and dirt etc from tanks and from mouths of circulated pipes and re-fixing in position after etc |
| 21 | Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as spd and directed |
| 22 | S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted incl all fitting such as connection pieces with GI tank nipple for inlet, outlet,washout and overflow etc complete all as specified and as directed. |
| 23 | Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removing to store complete all as spd and directed |
| 24 | S&F 1000 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete all as specified and as directed. |
| 25 | S&F in repair 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed |
| 26 | S&F in repair cover lid for 300/500/1000 ltr polythene water storage tank as required complete all as specified and directed by Engineer-in-Charge |
| 27 | S&F in repairs 15 mm size Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd and directed |
| 28 | S&F in repairs 20 mm size Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd and directed |
| 29 | S&F in repair 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair. |
| 30 | S&F in repairs looking mirror of any size selected quality 4 mm thick mounted on 6 mm thick commercial plywood inc side wooden moulding/framing with paint and fixed to wall with wooden plug & chromium plated brass screws complete all as spd and directed |
| 31 | S & F in repair soap dish approximately size 160 x160x 90 mm and fixed with as chromium plated brass screws complete all as specified and directed by Engineer -in -charge. |
| 32 | S & F Grating doom Steelness steel 125 mm dia with or without waste hole of with solvent cement complete all as specified and directed by Engineer - in - Charge. |
| 33 | S & F waste coupling of PTMT (half or full threaded) .Bore dia of discharge pipe 32 mm (Minimum weight 32mm45gms/40mm-60 gms |
| 34 | S & F waste coupling of PTMT (half or full threaded) .Bore dia of discharge pipe 40 mm (Minimum weight 32mm45gms/40mm-60 gms |
| 35 | S&F in repair PVC connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by Engineer-in-Charge. |
| 36 | S&F EWC Jet spray complete all as specified and directed. |
| 37 | S&F in repair Plastic water closet seat cover for pedestal pan, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as spd and directed |
| 38 | S&F in repairs PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screws complete all as spd and directed |
| 39 | S & F in repairs mild steel cloth hooks set (5-6 hooks) complete all as specified and directed by Engineer-in-Charge |
| 40 | S&F in repair Soap dispenser completes all as specified and as directed by Engineer-in-Charge |
| 41 | S&F in repair 15 mm bore, swan neck, taps cast copper alloy capaston head CP, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed complete all as spd and directed |
| 42 | S&F in repairs two way angle valve brass chromium plated, fancy type complete all as specified and as directed. |
| 43 | S&F in repairs toilet paper holder complete all as specified and as directed. |
| 44 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spd and directed |
| 45 | S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed |
| 46 | S&F in repair Towel Ring fixed with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engineer-in-Charge |
| 47 | S&F in repairs PVC waste pipe flexible type suitable for couplings 32 / 40 mm dia and 750 mm long complete all as spd and directed |
| 48 | S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern, duel flush type (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as spd and directed |
| 49 | S&F in repair brass chromium plated shower rose 100 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge |
| 50 | S&F in repair 15mm size angular Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed |
| 51 | S&F in repair 15mm dia size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed |
| 52 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed |
| 53 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as spd and directed |
| 54 | S&F in repairs sinks made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including supply and fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as spd and directed |
| 55 | S&F in repairs sinks with drainage board made of stainless steel lmm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed. |
| 56 | S&F Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 900mm x 250 mm , IN REPAIR, complete all as specified and directed by Engineer-in-Charge |
| 57 | S&F in repair Viterous China squating pan Orrisa pattern size 580/440mm wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover. |
| 58 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete. |
| 59 | S & F repairs 15 mm bore concealed stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup (Concealled type) |
| 60 | S&F in repairs brass chromium plated wall mixer for mixing hot & cold water with provision for overhead shower with 140mm long bend pipe and wall flange screwed down for iron pipe and fixed as directed by Engr-in- charge.Make:- ESS ESS cat part No.- C-216D |
| 61 | S&F in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by Engr-in-charge.Make ESS ESS cat part No.- C-211A |
| 62 | S&Fin repairs Sink mixer with swinging spout(wall mounted model)Chromium plated brass with connection and nut complete all as specified and directed by Engr-in-charge. Make- ESSESS Cat part No DE-12 or equivalent to Parryware/nirali/prayag |
| 63 | S&F in repair Vitreous china wash basin white flat back size 550x400 mm including brackets exceeding taps waste chain and plug and porcelain stopper fixed in repair |
| 64 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store |
| 65 | Supply & fixing of 20mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed. |
| 66 | Taking down steel tubing 20mm bore and connections complete all as specified and directed by Engineer - in - Charge. |
| 67 | M&L for Brick work using fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) includind demolition of old u/s brick/concrete masonary wk complete all as specified and directed by Engineer-in-Charge. |
| 68 | M & L for brick work in half brick thick wall using using fly ash bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 69 | M & L for rendering 15 mm thick on brick work or concrete surface in CM 1:4 finishing even and smooth without using extra cement, all as specified and directed by Engr- in- charge. |
| 70 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats after preparation to the new/ old decorated plastered surfaces complete all as specified and as directed by Engineer-in-charge |
| 71 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old decorated surfaces complete all as specified and as directed by Engineer-in-charge |
| 72 | Supply & fixing of 25mm outer dia CPVC pipes SDR 11 including all fittings Plain/brass threaded CPVC SDR 11 fittings (like Elbow, Tee, Socket, Reducer, Union, Bushing, Step over bends, End cap, End Plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including CPVC solvent cement for jointing complete all as specified and as directed.NOTE FOR CPVC PIPES : (i) Pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by Engineer-in-Charge. (ii) Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. (iii) Cost for cutting chases in wall and making good disturbed surfaces as required shall deemed to be included in the quoted unit rate. |
| 73 | Supply & fixing mild steel tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to wall all and including taking down old rusted pipes as specified & directed by Engineer-in-charge. |
| 74 | Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all and including taking down old rusted pipes as specified & directed by Engineer-in-charge. |
| 75 | Dismantling and disconnecting of existing cast iron or reinforced concrete drain pipes, jointed in cement mortar 75/100 mm dia bore fixed to wall,laid in trenches etc complete all as specified and directed Engineer-in-Charge |
| 76 | S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed |
| 77 | S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 78 | S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge |
| 79 | S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes provided with access door in repair complete all as specified and directed by Engineer-in-Charge |
| 80 | S & F 75 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge |
| 81 | S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed |
| 82 | S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed |
| 83 | S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes in repair complete all as specified and directed by Engineer-in-Charge |
| 84 | S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes provided with access door in reapir complete all as specified and directed by Engineer-in-Charge |
| 85 | S & F 110 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door in repair complete all as specified and directed by Engineer-in-Charge |
| 86 | M&L for 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement in repair complete all as specified and directed by Engineer-in-Charge |
| 87 | S & F PVC(SWR) Vent cowls 110mm bore all as specified and directed by Engineer - in - Charge. |
| 88 | Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed. |
| 89 | S & F in repair Low density polyethylene pipes (LDPE) 32/40 mm of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc |
| 90 | S&F in repair vitreous china two piece wall hung/floor mounted extended EWC white with CI 'P' or 'S' trap incl attached cistern, water closet seat cover of plastic, etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge Make :- Cera or Equivalant |
| 91 | S&F in repair vitreous china wash basin, white, Table top, size 540 mm x 360 mm x 115mm fixed on slab/stone etc with bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge Make :- Cera or Equivalant |
| 92 | S&F in repair Vitreous Cliina wash basin, angle back, size 400 x 400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32 mm dia brass waste coupling and, waste fitting and union complete all as specified and directed by Engineer-in-Charge |
| 93 | S & F in repairs Glass Shelf (450 cm long) fixed in position with stainless steel screws & PVC rawl plugs complete all as specified and directed by Engineer-in-Charge |
| 94 | S&F in repair Glass sheet corner shelf 300 mm size fixed in position with stainless steel screws & PVC rawl plugs complete all as specified and directed by Engineer-in-Charge |
| 95 | Shotcreting 25MM thick in RCC columns, beams and slabs and Chajja etc in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characterristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 25 mm average thickness with mannual chisel and /or standred power driven percussion cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge.Including the following items as under :-(a) S&F Hard drawn steel wire fabric minimum 2.50Kg/Sqm cut to lengths, bent to shape required and tying with and including nails and mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt all as specified & directed by Engineer-in-Charge.(b) M&L rendering 10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement.(c) M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling. |
| 96 | M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below and as directed by Engineer-in-Charge. :- (a) applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface/floor (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt and demolition of old sunken treatment etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:5:10 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete as specified Manufacturer. Make:- Dr. Fixit/Fosroc/STP Including the following items as under:-(i) The treatment shall be carried out as per the manufacturers instructions and as directed by the Engineer in charge.The name of firm shall be got approved from GE before carrying out the work.(ii) Rendering to sunken slab floor and vertical sides 15mm thick in CM 1:3 using WP compound(iii) M & L PCC (1:5:10) using 40mm graded burnt bricks aggregate as in foundation filling & mass concrete or as in sunken floor complete all as specified & directed by Engineer-in-charge |
| 97 | Supply and fixing vitreous china premium/1st quality wall hung water closet with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc., and incl. plastic soft close seat cover as recommended by manufacturer for particular model closed pattern with flat bottom etc; and incl S&F of all necessary accessories set like rag bolts/gel gasket/hinges etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.Make : Jaquar (Continental Series-CNS-WHT-963N or Techno commercial equivalent (b) Supply and fixing health faucet (Hand Shower) fancy type, CP including 1.2 meter long 8mm dia wasy flex tube in chrome finish and including wall hook and fixing material, making connections and fixed in position complete all as specified and as directed by Engineer-in-charge. Make: Jaquar(continental series) ALD-573 / Hindware (contessa plus series)/ Cera (Ocean series) or Techno commercial equivalent(c) Supply and fixing concealed flushing cistern of PVC 8 ltr. cap with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size complete in all respect all as specified.Make : Jaquar (Concealed Cistern-JCS-WHT-2400S, Flush Plate-JCP-CHR-812415) or Techno commercial equivalent ' Please Enable Macros to View BoQ information |
