Tender For Repair Of Damage Ug Xlpe Cable, Restringing Of Oh Conductors And Repair Of Damaged Switch Socket, Light Fitting & Point Wiring At Various Location At Namkum Under Ge Ranchi
Tender Value
33 Lakhs
Estimated cost
Bid Submission
04 Jul 2026
0 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Damage Ug Xlpe Cable, Restringing Of Oh Conductors And Repair Of Damaged Switch Socket, Light Fitting & Point Wiring At Various Location At Namkum Under Ge Ranchi
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable, foundation etc, and getting out in hard /dense soil complete all as specified and directed. |
| 2 | Returning filling in including spreading, leveling, Watering and well ramming in layers not exceeding 25cm complete all as specified and directed. |
| 3 | Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 4 | M & L for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified and directed. |
| 5 | Material and labour for laying bricks 'B' class over a cable (Width wise) old laid dried complete all as specified and directed. |
| 6 | Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 300Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed. |
| 7 | Descirption all as per above item Ser No 6 but size 3.5 core X 240 sqmm |
| 8 | Descirption all as per above item Ser No 6 but size 3.5 core X 185 sqmm |
| 9 | Descirption all as per above item Ser No 6 but size 3.5 core X 120 sqmm |
| 10 | Descirption all as per above item Ser No 6 but size 3.5 core X 95 sqmm |
| 11 | Descirption all as per above item Ser No 6 but size 3.5 core X 70 sqmm |
| 12 | Descirption all as per above item Ser No 6 but size 3.5 core X 50 sqmm |
| 13 | Descirption all as per above item Ser No 6 but size 3.5 core X 35 sqmm |
| 14 | Descirption all as per above item Ser No 6 but size 4 core X 25 sqmm |
| 15 | Descirption all as per above item Ser No 6 but size 4 core X 16 sqmm |
| 16 | M& L for GI tubing medium grade of size 50 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc including taking down of old unseviceable pipe any type and any size complete all as speified and directed.Note - Excavation to be paid separately in respective items. |
| 17 | M& L for GI tubing medium grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc including taking down of old unseviceable pipe any type and any size complete all as speified and directed.Note - Excavation/PCC cutting to be paid separately in respective items. |
| 18 | Supply, jointing and testing Straight through cable joint heat shrinkable including all material and accessories suitable for 4 core X 25-185 Sqmm XLPE cable of 1100 volts (E)grade complete all as specified and directed. |
| 19 | S & F in repair aluminium lugs duly crimped at end termination of LT distribution panel connected with various sizes of LT cable including all allied works such as disconnecting cable from supply site, removing from gland, making equal length of each core of cable and refixing the same with new metal gland all as specified and directed in following size:- |
| 20 | Upto 3.5 core x 95 Sqmm |
| 21 | 95 sqmm 3.5 core x 240 Sqmm |
| 22 | Taking down carefully exising unserviceable copper/aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 23 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 24 | (a) One light point controlled by one, one way switch 5 Amps |
| 25 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 26 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 27 | (d) One bell point controlled by one, bell switch 5 Amps |
| 28 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 29 | Description all as per item No 23 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 30 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- (Note- Modular cover plate and base plate of any module with all fittings are included in point wiring.) Contractor should make good even distributed wall/surface as before. |
| 31 | (a) One light point controlled by one, one way switch 5 Amps |
| 32 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 33 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 34 | (d) One bell point controlled by one, bell switch 5 Amps |
| 35 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 36 | Description all as per item No 25 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 37 | S & F for Modular Switch flush type, single pole, one way, and 5/6 Amp single module complete all as specified. |
| 38 | S & F for Modular Switch flush type, single pole, one way, and 15/16 Amp single module complete all as specified. |
| 39 | S & F for Modular Switch flush type, single pole, one way, and 15/16 Amp (set of 3 switches) , including junction box complete all as specified. JAQUAR Cat Part No SWG-GRY-GL16A3G01 , Havells AHLPLCGV03, Legrand- AC21312MT |
| 40 | S & F for Modular Switch Socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp including junction box complete all as specified. JAQUAR Cat Part No SKG-GRY-GL16ASC1GS1/ Havells ACGPTOFV03/ Schneider E8315_16_DG |
| 41 | S & F ceiling fan regulator rotary type heavy duty suitable to work on 230 volts AC supply including junction box and removal of old unserviceable one complete all as specified. JAQUAR Cat Part No SWG-GRY-GL1ARFSS/ Havells ACYRFHG008/ Legrand 573462 |
| 42 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 43 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified. |
| 44 | S & F ceiling fan regulator socketed, step type, 1 Module heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 45 | S & F ceiling fan regulator socketed, step type, 2 Module heavy duty suitable to work on 230 volts AC supply including removal of old unserviceable one complete all as specified. |
| 46 | S & F for Bell push modular 6 Amps single module complete all as specified. |
| 47 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-(Contractor should make good even distributed wall/surface as before.) |
| 48 | (a) One light point controlled by one, one way switch 5 Amps |
| 49 | (b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 50 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 51 | (e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 52 | Description all as per item No 37 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 53 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed including taking down old UNSV Note:- Two runs of 4.0 sqmm cable,one run of 4 sqmm cable and one run of PVC casing caping will be measured as one unit |
| 54 | Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 55 | S & F for Lamp holder, PVC body suitable for batten fitting completes all as specified. |
| 56 | S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified |
| 57 | S & F for Switch piano flush type, single pole, one way, and 6 Amp complete all as specified. |
| 58 | S & F for Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified. |
| 59 | S&F in replacement of switch socket combinations flush 5 Amp 5 pin competeI ,ISI marked |
| 60 | S&F switch socket combination 2 in 1, 3 pin, 15 amp multipurpose, flush type, all as specified and as directed |
| 61 | S & F for wall mounted LED tube light fitting 1x 22 W, 220V, 4000K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 62 | S & F for LED 10 watts batten with decorative end caps complete all as specified and as directed. |
| 63 | S & F for Highly efficient LED Bulbs, 10 W, of make Bajaj, Havells, HPL complete all as specified and directed |
| 64 | Taking out old/unsv/damaged PCC/steel pole complete with all accessories incl demolition of concrete with necessary excavation and earth work incl site clearance complete all as specified and as directed by Engr-in-charge |
| 65 | Supply,installation and erection in true vertical or to be planted as strut steel tubular swaged welded poles complete with MS base plate of 6mm thick of size 300mmx300mm at bottom duly welded and MS pole cap at top,poles made out of ERW MS tubing confirming ti IS1161 part-II, type 410 SP -31(9.0m long) including drilling of holes of required size and nos for fixing of cross arms/clamps, painting with one coat of red oxide primer and two coats of aluminum paint for expose surface and two coats of black bituminous paint for portion embedded in concrete, painting three black/white bands at lower portion of pole each of 300mm height at 300mm spacing, painting pole no. with black paint at suitable height complete all as specified and directed |
| 66 | M&L for plain cement concrete 1:4:8 type D2(Using 40mm graded crushed stone agg) as in foundation of poles and mass concrete complete all as specified |
| 67 | M&L for cement concrete 1:3:6 type C2((Using 40mm graded crushed stone agg) as in foundation of stays and coping around poles complete all as specified |
| 68 | M&L for Cross arms bracings, support, clamps and back plates fabricated from structural steel section including nuts, bolts, washers etc, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminum paint complete all as specified and directed by Engr-in-Charge. |
| 69 | M & L for shackle type porcelian vitreous white ,brown or green insulator including galvanised mild steel straps washers,insulator bolts,washers and nuts of size 100 mm height and 115mm dia for 1100 volts grade complete incl taking down old/unsv insulator any type |
| 70 | Supply, laying, jointing and testing XLPE insulated, PVC outer sheathed, galvanised steel strips armoured, heavy duty power cable with aluminium conductor suitable for rated voltage of 1100 Volts grade earthed system and conforming to IS : 7098 of 1995 and of size 3.5 core X 16Sqmm and laid in trenches/ducts/pipe or on poles complete all as specified and directed. |
| 71 | Description all as per abover Ser No 56 but size 4 core X 10 sqmm |
| 72 | M&L Cleaning the existing exposed surfaces of steel tubular pole of 9.0 mtr long including cross arms, brackets, clamps etc and painting with two coats of aluminium paint marking five black & white bands at lower portion of pole, each 300 mm wide alternately and marking pole No. with yellow paint on black base at suitable height complete all as specified and directed by Engineer-in-Charge. |
| 73 | M&L for cement Painting of PCC pole 9.0/11.0 metre long, by applying one coat of cement colour after scraping / brushing and cleaning the rust on pole and street light bracket to painted with one coat of Aluminium paint. Cement colour will be done on pole above 1.5 metre height from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enameled paint (30 Cms Each) Pole Nos shall be written on pole with black paint in yellow circle of 150mm dia, complete, all as specified and directed. |
| 74 | M& L for pin type ,porcelain,vitreous white brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut 150mm height,150mm dia for 11000 volts grade |
| 75 | Material and Labour restringing of LT ACSR OH line conductors up to permissible sag after dismantling the binding wires from insulators and jumper connections complete for the following and providing 4 wire only (three phase and neutral) with new aluminium conductor binding wire to insulators and Jumpers etc all as directed. |
| 76 | Trimming of tree branches around over head LT electric lines and cleaning 3 Mtrs from the line, removing cut materials ( tree branches) from site and stacing properly where directed. Grith of branch ( where cutting took place) not exceeding 50 mm complete all as specified. |
| 77 | Supply and fix PVC spacers 4way for LT OH line 1100 volts grade with necessary screw nuts bolts etc complete all as directed to prevent the lines touching each other on heavy wind as a preventive arrangment to existing system including removal of unservicable spcers complete all as specified and as directed. |
| 78 | S & F for Switch piano flush type, single pole, one way, and 6 Amp complete all as specified. |
| 79 | S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified |
| 80 | S & F for LED lights fitting 1x 10 W, 220V, AC box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Cat Part No Bajaj BCLSB 10 WH or equivalent in |
| 81 | S & F for wall mounted LED tube light fitting not less than 12 W, 220V, 6500K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part No Phillips BN021 LED12S 6500K PSU GR, Bajaj-BCLSBAL 12W CW or Havells LUMILINEPLUSPROBS12WLED865SPCSSIND |
| 82 | S & F for wall mounted LED tube light fitting not less than 12 W, 220V, 4000K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part No Phillips BN021 LED12S 4000K PSU GR, Bajaj-BCLSBAL 12W CW or Havells LUMILINEPLUSPROBS12WLED865SPCSSIND |
| 83 | S & F for LED lights fitting not less than 20 W, 220V, AC box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Cat Part No Bajaj BCLSB 20 WH, Jaquar BTI-WHTLTBL01X020XC or crompton TCS-109-20-65-SL-DP-NWH. |
| 84 | S & F for wall mounted LED tube light fitting not less than 22 W, 220V, 6500K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part phillips BN021 LED22S 6500KPSU GR, Jaquar BTI-WHT-LGLZU1X022XW or Havells- LUMILINEBS22WLED865SPCWH |
| 85 | S & F for wall mounted LED tube light fitting not less than 22 W, 220V, 4000K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat Part phillips BN021 LED22S 4000K PSU GR, Jaquar BTI-WHT-LGLZU1X022XW or Havells- LUMILINEBS22WLED865SPCWH |
| 86 | S & F for wall mounted LED tube light fitting not less than 36 W, 220V, 6500K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat part phillips BN021 LED40S 6500K PSU GR , havells LHEWAJPGPV1E036 or Bajaj BZRIV36WLEDCW |
| 87 | S & F for wall mounted LED tube light fitting not less than 36 W, 220V, 4000K batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Cat part phillips BN021 LED40S 4000K PSU GR , havells LHEWAJPGPV1E036 or Bajaj BZRIV36WLEDWW Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayJul 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender