|
| 1 | PIPE LAYING-Supplying all labour, T&P for earth work excavation in all kinds of soil (for pipe line trench) within 50 mtrs initial lead and 1.5 mtrs initial lift including rough dressing and leveling the bed etc., all complete as per the direction of Engineer-in-charge. |
| 2 | Supplying all materials, labour , T&P for laying of following HDPE pipes of PE-80& PN-8 pressure rating conforming to IS4984-1995 &specials of following outside diametre and class-4 to class-5 and jointing by fusion welding method including testing as per specification complete as per direction of Engineer-in-charge 50mm dia HDPE. pipe |
| 3 | 40mm dia HDPE. Pipe- PE-80& PN-8 |
| 4 | 32mm dia HDPE. Pipe- PE-80& PN-8 |
| 5 | Supplying all labour, T&P for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of Engineer-in-charge. |
| 6 | Supplying all materials, labour and T&P for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (Tata / Zindal/Bansal make) confirming to IS 1239(P.1)2004/IS:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of Engineer-in-charge to be used to cross drainage work including jointing with rubber insertion, nut and bolts, clamp making and fixing if required and providing necessary masonary support as per site condition and jointing to the water mains and providing scaffoldings as per directiobn of EIC.65 mm dia G.I. ( medium ) pipe |
| 7 | Providing flange to the GI pipe including cost of flange, welding using welding generator at site etc. Complete-65 mm dia G.I. ( medium ) flange |
| 8 | Providing flanged joints to flanged pipe and fitting including testing of joint , cost of bolt & nutand rubber insertion etc. As per specification complete ( as per P.H. S/R 2.1.25) |
| 9 | GI Fittings-65mm dia x 900GI Bend of size (0.30 x 0.30)m |
| 10 | Fixing of Brass or Gun metal Full way valve confriming to IS:781:1995 of the following nominal sizes with wheel as per specification complete-65mm dia full way valve |
| 11 | 50mm dia full way valve |
| 12 | 40mm dia full way valve |
| 13 | 32mm dia full way valve |
| 14 | Fixing of Gun metal check or non return valve confriming to IS:5312(Part-I)2004 of the following nominal bore as per specification complete-50mm dia Gun Metal check or non return valve |
| 15 | 65mm dia Gun Metal check or non return valve |
| 16 | M/S Nut & bolt |
| 17 | Cutting of GI pipe by electric arc welding at site including cost of materials labour T&P etc all complete. |
| 18 | Providing joints by welding with two welding beads/pass, confriming to IS:816-1998 (Single 60° Butt weld) to GI pipes and fittings at site by using welding genreator including testing of joints, as per sepcification complete |
| 19 | Construction of 4.00 mtr dia RCC Intake well-Earth work in all kinds of soil within 50m initial lead and 1.5 mt. Initial lift and rough dressing, leveling the bed etc. all complete with supply of all labour T&P as per the dir etc. complete as per the direction of the Engineer- in –Charge. |
| 20 | Providing and laying cutting edge of mild steel weighing 40 Kg. per mtr well foundation complete as per drawing and technical specification. |
| 21 | RCC M-20 grade with 20mm and down grade hbg chips including all cost,lead and royalties of materials |
| 22 | Rigid & smooth steel, centering & shuttering at all high for the work such as well curb & well staining using required numbers of verticals and horizontal supports of scaffolding with joists , NG rails , and channels and steel shutering plates including welding, bolting , cost conveyence , royality and all other taxes of all materials and cost of scaffolding gangway etc. including cost and conveyence of dismentalling and disposing debris, clear of work site complete to receive reinforcement grills and concrete as per the requirement as directed by engineer in charge. Walls of curb and steining, outside and inside of steining |
| 23 | Supplying , fitting & Placing uncoated HYSD Bar reinforcement complete as per Drawing & Technical Specification etc. all complete |
| 24 | Supplying all labour T&P, etc for sinking of well in all kinds of soil other than rock to lines levels and plumb by scooping out from in side & below the staining including cist of necessary tools & plants. Supply and working of pumps and bailing out of water or dredging removal of all materials and obstacles from inside the well by divers hire and labour for contiledge jetting if necessary and sinking to a depth of 10m taking pre precaution against shifting and tilting disposal of soil with all leads & lifts etc. complete and as per direction of Engineer-in-charge.-4.60m OD circular well |
| 25 | Supplying of all materials,labour and T&P for fabricating and fixing of G.I hand rails made out of 32mm dia oG.I.pipes with necessary fittings etc all complete including fixing on the walk way with necessary welding at site.-32mm G.I. Pipe approx. |
| 26 | Cutting of 32mm G.I. Pipes approx. |
| 27 | Welding of 32mm G.I. Pipes approx. |
| 28 | Supplying of all materials,labour and T&P and providing gravels at bottom of intake well including ocst, conveyance and royality etc. all complete as per direction of Engineer-in-charge. |
| 29 | Finishing walls with water proofing cement paint of approved shade on new work 2 coats to give an even shade excluding cost of paint including all cost, conveyance,taxes,royality etc.complete. |
| 30 | Supplying all labour T&P for boring of 50mm dia trial bore through hand boring by sludging method in all kinds of soil upto required depth including cleaning the site with supply of all necessary bearing pipes, cutter plug, sucket and needfull materials and staging etc. all complete and withdrawing the bearing pipes etc, and depositing the soil samples in poly packs etc all complete and as per direction of Engineer-in- charge.-( 20 nos trial bore of 10 mtr depth) |
| 31 | Provision for GI Pipe arrangement including fabrication, fitting and fixing of Pudle Collar for inlet, outlet, over flow & washing line, providing all materials to site including T&P, welding machine, gas and transportation, cutting, bending, making offset of required welding flages, necessary earth work for laying of pipe line painting two coats over one coat of red oxide primer including fixing of valves with required consumables like rubber insertion, nut bolts, white lead, gas kit, etc complete as per the direction of Engineer in charge.-200mm CI Puddle Collar |
| 32 | Supplying all materials, labour,T&P for supply of pre-cast RCC ring having 0.90 M dia having thickness of 35 mm to 40 mm and height 0.30 M including transportation to site and lowering inside the intakewell and placing in position all complete. |
| 33 | Construction of cover slab and steps -Earth work in all kinds of soil in excavation of foundation within initial lead and lift |
| 34 | Supplying , all labour material &T&P for filling of sand in foundation. |
| 35 | Supplying all labour T&P materials providing cement concrete (1:3:6) with 40mm HBG metals including cost, conveyance & royalty of materials etc. all complete. |
| 36 | RCC M-20 grade with 20mm and down grade hbg chips including allcost,lead and royalties of materials |
| 37 | Rigid & smooth Centering & Shuttering for RCC Works including false work & dismantling then after casting including cost of materials complete in ground floor.--Slab |
| 38 | Beams & column |
| 39 | Stair |
| 40 | Supplying , fitting & Placing uncoated HYSD Bar reinforcement complete as per Drawing & Technical Specification etc. all complete |
| 41 | Laying of Gallery line-Earth work in all kinds of soil within 50m initial lead and 1.5 mt. Initial lift and rough dressing, leveling the bed etc. all complete with supply of all labour T&P as per the dir etc. complete as per the direction of the Engineer- in –Charge. River Bank near intake well sides-1st depth of 1.50mtr. |
| 42 | 2nd depth of 1.50mtr. |
| 43 | 3rd depth of 1.50mtr. |
| 44 | Earth work in slushy soil in excavation of gallery line with in 50m initial lead & 1.50m initial lift as per direction of Engineer-in charge. River Bed -1st depth of 1.50mtr. |
| 45 | 2nd depth of 1.50mtr. |
| 46 | Dismentling and removing RCC walls and removing of debris for making hole on wall of collection well to connect pipe line. |
| 47 | Supplying all labour T&P materials providing cement concrete(1:2:4) with 12mm HBG chips including cost, conveyance & royalty of materials etc. all complete to seal the hole of wall of collection well after laying of gallery line |
| 48 | Supplying of all labour,T&P and materials for providing of different sizes H.G. stone chips ( i.e. 10mm ,20mm ) & H.G. metal of 40mm size as per necessay around screened pipes asper specification and drawing including cost conveyance & royalty et.c complete all complete as per direction of Engg. -in - charge.-40 mm size H.G.stone chips ( C.B. ) 1st. Layer (Around the pipe) |
| 49 | 20 mm size H.G.stone chips ( C.B. ) 2nd. Layer (Around over the 10mm chips) |
| 50 | 10 mm size H.G.metal ( C.B. ) 3rd. Layer (Around over the 20 mm chips ) |
| 51 | Sand filling |
| 52 | Supplying all labour, T&P, filling in gallery line with excavated materials after laying of gallery line as directed by Engineer-in charge of the department. |
| 53 | Dewatering during execution of work by supply and use of 5H.P disel engine continously worked as per necessaryand as per direction of the engineer in charge. |
| 54 | Supplying all labour, T&P, material for shoring and shuttering in foundation treaches, pits etc. with close wooden planks or sheets shuttering for protection to errosion of soil in rever bed etc. complete. |
| 55 | Transportation , laying etc of 200mm dia PVC( ASTM) pipe |
| 56 | CONSTN. OF PUMP HOUSE ( 3m x 3m ) Earth work excavation in foundation in all kind of soil within initial lead of 50m and lift of 1.5m including dressing and leveling the bed and depositing the materials away from the work site and breaking clods from 5cm to 7cm not exceeding 0.3m in depth etc. |
| 57 | Filling foundation and plinth with good river sand well watered and rammed including cost, conveyance, royalty, labour, T&P etc. complete. |
| 58 | Providing and laying PCC (1:4:8) in foundation using 4cm sizeHBG metal in foundation including laying in layers not exceeding 22.5cm thick with watering and curring for 28 days with cost, conveyance royalities and taxes etc. complete. |
| 59 | RR stone masonry in CM (1:6) for F&P all complete including all cost, conveyance,taxes,royality etc.complete. |
| 60 | Earth filling in foundation and plinth with excavated earth with initial lead & lift |
| 61 | Providing fly ash brick masonry in c.m. (1:6) for use in superstructure using. bricks of 230mm size including splays cutting, circular moulding, champering, corbelling, curing with all cost, conveyance, royalty of materials, labour, T&P etc. complete. |
| 62 | Reinforced cement concrete (1:2:4) with 12mm size black hard crusher broken granite chips including laying in position compacting to proper design section but excluding cost of tor steel rod and labour charges for cutting, bending, binding and tying the grills etc. |
| 63 | Rigid and smooth centering and shuttering for RCC work including false works and dismentling then after casting etc.complete. -plinth |
| 64 | Lintel |
| 65 | Roof slab |
| 66 | Supplying, straightening, cutting, bending, binding, bent up coiled Tor steel and binding wires, binding, tying the grills, hoisting, lowering and placing in position including all cost, carriage, taxes, all labour, T&P etc. complete including cost of MS grills etc. |
| 67 | 12mm thick cement plaster in c.m. (1:6) to wall surface with cost, conveyance, royalty, all taxes, labour including watering and curing, T&P etc. complete. |
| 68 | 20mm(3/4\\") thick C.P. with C.M.(1:6) over Stone masonary including all cost, conveyance,taxes,royality etc.complete. |
| 69 | 2.5 cm thick AS flooring with CC 1:2:4 using HG chips including punning. |
| 70 | Cost of M.S.Doors & Windows |
| 71 | Labour charge for fixing of M.S. door & windows in position with welded holdfasts complete |
| 72 | Painting two coats with approved paint over door & windows incl. cost of all materials etc. complete |
| 73 | Wall painting two coats withplastic emulsion paints of approved shade of new work to give an even shade incuding cost of paint.over a coat of white wash including all cost, royality etc.complete. |
| 74 | Supplying all materials, labour, T&P for providing Distempering two coats of approved shade on new work including cost of distemper (Per 10 sqm) |
| 75 | Supplying all materials, labour and T&P for wall writing with appropriate size of letters for displaying different salient features on pump house complete as per direction of Engineer-in-charge |
| 76 | CONSTRUCTION OF 20,000 LTRS CAPACITY SUMP Earth work in all kinds of soil within 50m initial lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding o.3m in depth and as per the direction of the Department. |
| 77 | Supplying all materials, labour and T&P for filling foundation with sand watering and ramming inside in the plinth etc., all complete as per direction of Engineer-in-charge |
| 78 | Supplying all materials, labour, T&P for providing cement concrete (1:3:6) with 4cm size crusher broken HBG metal with cost, conveyance, royalty of materials including watering, curing ramming etc., complete. |
| 79 | Supplying all materials, labour, T&P for providing cement concrete M-25 for RCC work with 12mm crusher broken HBG chips and washed and screened sand for RCC works with cost, conveyance, royalty of materials and including watering curing etc., but excluding cost of MS rods complete and as per direction of Engineer-in-charge. |
| 80 | Supplying all materials labour and T&P for cutting, bending binding the reinforcement and tying the grills and placing in proper position including cost of binding wire of 18 to 20 gauge all complete including cost of MS tor rods of HYSD Fe415 grade and as per direction of Engineer-in-charge. |
| 81 | Labour for rigid and smooth centering and shuttering for RCC works and dismantling them after casting including cost of all materials T&P etc., complete as per direction of Engineer-in-charge. Foundation |
| 82 | Wall & Fin |
| 83 | Column & Beam |
| 84 | Shell roof |
| 85 | Supplying all materials, labour and T&P for providing 20 mm thick cement plaster in cement mortar (1:4) over RCC work including deep chipping and slurry treatment with watering and curing including cost, conveyance and royalty of materials and as per direction of Engineer-in-charge. |
| 86 | Cement punning including all cost, conveyance,taxes,royality etc.complete. |
| 87 | C.C. (1:2:4) using 12mm size CB HG chips including all cost, conveyance,taxes,royality etc.complete. |
| 88 | Wall painting two coats withplastic emulsion paints of approved shade of new work to give an even shade incuding cost of paint. including all cost, conveyance,taxes,royality etc.complete. |
| 89 | Puddle collar 65 mm |
| 90 | Supplying all materials, labour and T&P for providing and fitting & fixing of CI / MS Man Hole cover of 600 mm Dia. including all cost, conveyance,taxes,royality etc.complete. |
| 91 | Supplying all materials, labour and T&P for suitable size of Stainless steel ladder (32 mm x 25mm) for sump inside incl. C.C. (1:2:4) for top & bottom |
| 92 | PUMPING UNIT INSTALLATION Supplying , Testing , Installation and Commissiong of three phase 5 HP horizontal submersible pumpset of approved make (KSB, Kirloskar,CRI ) for Intakewell MR 5 C-50-40-40 DOL including 1 no stand by |
| 93 | Supplying, installation and testing of Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for 5 HP three phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps.( one set standby)6.00-9.30amp. |
| 94 | Supplying , Testing , Installation and Commissiong of single phase 3 HP vertical submersible pumpset of approved make (KSB, Kirloskar,CRI ) for 2 Nos production well of discharge 2 lps against head of 135 mtrs with 1 no stand by. |
| 95 | Supplying, installation and testing of Suitable control panel board of reputed make with ISI/ ISO Certified (BCH, L&T, Havells, etc) for 1 HPsingle phase consisting C.R.C.A sheet with colour coating both side of the box and proper locking system, contactor, volt meter, ampere meter along with single phase preventer and weather proof auto manual switch, volt meter with selector switch including light ON & OFF switch for the above work with 3 Phase indicator Lamps.( one set standby)6.00-9.30amp. |
| 96 | 4mm2 3core flat submersible cable of reputed make with ISI/ ISO certified (reputed make etc.) |
| 97 | 6 mm2 PVC coated steel wire rope of reputed make |
| 98 | Lowering of 50mm OD ISI marked, High Density Polyethylene (HDPE) pipes for water supply as per IS No. 4984/1995 (Reaffirmed 2002) PE 80 PN 08 inside the production well. |
| 99 | Supplying, Fitting of 200mm dia C.I. Bore cover, 2set Suitable M.S Bore Clamp, with required accessories like G.I R/S fittings for jointing to water mains, stainless steel nipples, s/s nut bolt, wire rope clamp suitable to HDPE Pipe, G.I.bend, and nutbolts, and other tit bit items including jointing of cable etc required for connection to the rising main |
| 100 | M S Clamp to hold 50 mm pipe |
| 101 | 50 mm G I Union |
| 102 | 50x150 mm mm G I Nipple |
| 103 | 50mm G.I. Elbow |
| 104 | 50 mm dia steel nipple |
| 105 | Labour charges for fitting & fixing of pump motor in production well & sump including lowering charges Please Enable Macros to View BoQ information |
