|
| 1 | Supply cost of structural steel and rolled steel materials of Embedded parts consisting of seal beam, guide, track arrangement etc. suitable for vent size of 1000mm x 1600mm and maximum guide length of about 3500mm for 04 nos. of gates including 5% wastage material complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 2 | Fabrication cost of the above mentioned embedded parts with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables,complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 3 | Supply cost of structural steel and rolled steel materials of vertical gate consisting of skin plate, end vertical girders, horizontal girders, bronze pads, lifting brackets, seal arrangements etc. suitable for vent size of 1000mm x 1600mm complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 4 | Fabrication cost of the above mentioned gate leaf with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables, complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge.. |
| 5 | Supply cost of structural steel and rolled steel materials of Steel Hoist Bridge consisting ofmain beams, base plates etc. suitable for vent size of 1000mm x 1600mm complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 6 | Fabrication cost of the above mentioned steel hoist bridge with all accessories including machinery, fixtures, labour, cutting, aligning, welding, cleaning, finishing, including consumables, complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 7 | Supply cost of Restraining arrangements consisting of main beam, supporting angle for beam, brackets, stiffners, c clamp and bush with all accessories including machineray, fixture, labour, cutting, alligning,welding, cleaning, finishing including consumables all complete as per specification with all lead & lifts excluding boughtout items. |
| 8 | Fabrication cost of Restraining arrangements consisting of main beam, supporting angle for beam, brackets, stiffners, c clamp and bush with all accessories including machineray, fixture, labour, cutting, alligning,welding, cleaning, finishing including consumables all complete as per specification with all lead & lifts excluding boughtout items. |
| 9 | Erection, positioning, aligning, fixing, trial and commissioning including unloading and shifting upto location of all components 1st. Stage and 2nd. Stagge embedded parts, vertical gate leaf, steel hoist bridge assembly, with all accessories including machinery, labour, fixture, cutting, aligning, welding, cleaning, finishing complete in all respects with all leads and lifts for smooth operation as per specification and direction of engineer-in-charge. |
| 10 | 80mmX30mmX12mm Bronze Pad |
| 11 | Side Seal Ø 32mm x10mm th- 80mm width Rubber seal IS : 11855 |
| 12 | Top Seal Ø 32mm x10mm th- 80mm width Rubber seal IS : 11856 |
| 13 | Bottom Rubber seal ( flat type bottom seal of size 75mm x 10mm) IS : 11855 |
| 14 | 2nd stage embedments, Ø16 Studs, bolts, nuts, washers & nut, bolt required for mounting rubber seal etc. |
| 15 | Nut type Screw Gear box assembly suitably square threaded for 80mm dia screw rod all inclusive of cost of material, cost of Thrust bearing, machining and assembly charges. |
| 16 | Anchor bars |
| 17 | Anchoring adhesive |
| 18 | Lifting pin dia 30mm & length 140mm - 45C8 of IS : 1570 (PART II) |
| 19 | Dia 80mm Screw Rod suitably square threaded to M78 x 10 all inclusive of cost of material, straightening and machining. |
| 20 | Dia 80mm plain Stem Rod all inclusive of cost of material, straightening etc. |
| 21 | Restraining arrangement bush ID 80mm thickness 10mm & length 200mm Aluminium bronze all inclusive of material, machining as required & as specified in drawing. |
| 22 | Restraining arrangement MS bush clamp ID 100mm length 200mm all inclusive of material, machining as required & as specified in drawing. |
| 23 | Lubricant like grease & mobil |
| 24 | Stainless Steel |
| 25 | Gate Lifting Handle |
| 26 | Painting cost of Embeded part, gate leaf (With one coat Zinc primer & 3 coats of Coal tar epoxy paint) & Painting of Hoisting Platform, Ladder & Railing (With one coat Zinc primer & 3 coats of Aluminium paint) |
| 27 | Construction of coffer dam by sand bag and dismantling after completion of work including cost of labour and sand bag. |
| 28 | Labour charges for dismentling, concrete cutting, chiseling to shape the groove |
| 29 | 2nd stage concreeting |
| 30 | Cost of Watch and ward, dewatering and vent cleaning |
| 31 | Cost of Transportation cost: Transportation of Bulky materials like Machineries, generators etc alongwith gate components & other accesories (per truck) Please Enable Macros to View BoQ information |
