|
| 1 | Dismentelling brick or flagged stone frooring without conc base |
| 2 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within lead of 30 meters. |
| 3 | Loosening, leveling and compacting original ground upto a level of 500mm below road crust, mixed with water at OMC, levelled, graded and compacted in layers by rolling so as to achieve minimum dry density as given in Table 300-2 for sub grade construction as per technical clause 305 of MORT&H specifications |
| 4 | Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20grade 250mm high with bottom width165mm and top width 115mm made over strong vibratory table and fixing with cement mortar1:2 as per MORT&H specifications |
| 5 | Providing & laying Graullar sub base material ( GSB) |
| 6 | Cement conc 1:4:8 with 40mm gauge stone aggregates mixing by manual means using concrete volumetric mixer |
| 7 | Providing and laying 60mm thick factory made cement concrete interlocking Paving blocks of M 35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRCSP63-2014 and of approved size and design/ shape laid in Ordinary Grey Colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in Charge. |
| 8 | Extra Cost for using darker fast shade for interlocking pavers Tiles of any shape & thickness instead of grey colours. |
| 9 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish (for kerbs) |
| 10 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 11 | Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within lead of 30 meters. |
| 12 | CC 1:3:6 with Stone Ballast or shingle mixing by manual means |
| 13 | First class burnt brick work laid in cement sand mortar 1:4 in foundation & plinth |
| 14 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level |
| 15 | 12.5 mm thick cement plaster |
| 16 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 17 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 18 | Iron gratted door incl pintal hinges and arrangments wt @ 4 kg/sft |
| 19 | Applying priming coat with metal primer on new steel or iron work incl prepration of surface |
| 20 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 21 | Boring with casing pipe for tubewell in all kinds of soils |
| 22 | Supplying assembling lowering and fixing in vertical position in bore wells PVC Medium well casing CM pipe |
| 23 | Supplying assembling lowering and fixing in vertical position in bore wells PVC Medium well Screening RMS pipe |
| 24 | S/Fixing of well cap having thread to fix on housing pipe |
| 25 | Providing & fixing submercible pumping set with 1.5 HP S Head incl adapter complete (Crompton/KSB/Kalsi make) |
| 26 | Proving laying jointing fixing & testing UPVC pipe & testing UPVC pipe |
| 27 | P/F of Main control panal excluding cable of approved ISI Make |
| 28 | Proving & fixing PVC insulated coper conductor 3 core cable ISI marked 2.5 mm square 1100 volts grade |
| 29 | (A) Supply and erection of G.I. pipe ‘A’ quality of suitable length and dia. confirming to IS:1239 (Part-I) 1979, including fixing up to a given depth below G/L, the hole of excavation about 30cm dia. and given depth to be filled in up to 15cm below G/L with 1:2:4 cement concrete including painting of pole with two coats of approved aluminium paint as required:- (ii) G.I. Pipe Pole 6.1 metre Long, Dia. 80mm, Planting Depth 120cm with Pit Depth 135cm. |
| 30 | (B) Supply and erection of G.I. Pipe (AClass) Single arm bracket of suitable length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the top of GI pipe pole with two coats of an approvedaluminium paint complete in all respect as approved by the Engineerin- charge at site (a) Single Arm Bracket 1 metre Long G.I. Reducer 80x40mm Pipe40mm Dia. |
| 31 | (i) Laying of under ground cable to be laid 1 metre below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc. |
| 32 | Suppling /Erection of PVC casing pipe for wiring purpose xxvii © PVc casing n capping size 25x16m |
| 33 | Erection of G.I. Pipe/ 3-Stepped Steel tubular pole in suitable planting depth below ground level in a hole of excavation and suitable depth to filled in up to 15 cm below G/L with 1:2:4 cement concrete mixture but excluding cost of pole including two coats of approved aluminium paint etc:- (a ) Erection of G.I. pipe pole upto 6 m length (hole of excavation about 30 cm dia.) |
| 34 | (v) Making of cement concrete muff of overall size 450mmdia., suitable length (15cm below ground level) with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole/ GI pipe pole. The outer surface of the muff shall be finished with 1:2 cement plaster with two coats of white snowcem complete in all respect as approved and desired by the Engineer in- Charge at site:- ( b ) Cement Concrete Muff of Overall Size 450mm dia., 60cm long |
| 35 | (vii) Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB‘s) complete in all respect as approved and desired by the Engineer In-Charge at site:- (b) SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 200mm x 140mm x 95mm with hinged water tight cover with locking arrangement |
| 36 | Providing & fixing bajaj LED Luminaire (45 W) street light Please Enable Macros to View BoQ information |
