|
| 1 | Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span , whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification. |
| 2 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 3 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. |
| 4 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length andwelded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 5 | Supply and delivery of Office chair. The seat and back shall be made PU form of density 45 kg/m3 upholstered with changeble fabric upholstery covers,and base five prong made of black color reinforced PU plastic with Nylon Wheels and pneumatic up & down with one point locking mechanism. etc complete complying with standard specificatoin and as directed by the departmental officers. |
| 6 | Supply and delivery of Dining Table of size 1.20 m × 1.00 m, made with good quality wood/metal frame, laminated top, including transportation, loading, unloading and all leads and lifts complete as directed by the departmental officers. |
| 7 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper (SD 23) |
| 8 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan |
| 9 | Supply and erection,testing and commissioning of 18W LED Flursant tube light fittings |
| 10 | Supply and Installation Water Purifier with Normal Hot and Cold dispensing option Model Name |
| 11 | Supply and fixing show rack and bag rack |
| 12 | Plumbing Work |
| 13 | 25 mm dia |
| 14 | 32 mm dia |
| 15 | Supply and providing 1000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT |
| 16 | Supplying and fixing of Wash Hand Basin of size 550mm x 400mm with all accessories such as cast iron Brackets,32mm Dia CP Waste coupling .,rubber plug and Chain,32mmDia B Class GI waste pipe ,15mm Dia G M Wheel Valve 15mm Dia Nylon Connection , 15mm Dia Bress Nipples,15mm cp ,Piller tap Etc |
| 17 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 18 | Painting with first quality emulsion paint two coats over a priming coat Please Enable Macros to View BoQ information |
