|
| 1 | Providing, installation, testing & commissioning of diesel generating set suitable for operation at site with rated output of 320 KVA. The DG set shall be compliant with latest CPCB norms and shall comprise of a silent, eco-friendly diesel engine and an alternator close coupled and mounted on a common base frame along with standard accessories within acoustic enclosure & rated for continuous duty with overload provision of 10% for running electrical induction motor with different capacities coupled to sewage / drainage pump as well as illumination system. The DG set shall be providedalong 285 Sq mm 3.5 core Alcabling from D.G set to main MCC panel, earthling as per OEM recommendations. The job includes P/L of RCC foundation block as per OEM recommendations along with CGI roofing. Make (Cummins/Caterpillar/Kirloskar/equivalent) |
| 2 | Providing, fabrication erection of MS workingplateform over the main pumping sump. The MS frame is to be fabricated out of ISMB,ISMC and angle iron.The frame is to be covered by MS chequered plate 6mm thick and the openings at the requisite places are to be fabricated with hinge mechanism for the lifting and lowering of the pumping units duringmaintenance. Fabrication and erection of MS ladder 6 mtr long to be erected inside the sump.The details of ISMB, ISMC, Angle iron and chequered plates are as under.i. ISMB 250=20 [email protected] Kg/RM=746 kgii. ISMC 150=40 RM @16.8Kg/RM=672 kgiii. ISA 80= 20 [email protected] Kg/M=196 kgiv. ISA 65=30 RM @5.80Kg/RM=174 kgv. Chequered Plate 6 [email protected]/SM=2355kgTotal weight=4143 kg |
| 3 | Providing, fabrication erection of MS trash guard for the main pumping sump. The MS frame is to be fabricated out of, ISMC and angle iron and flat iron of requisite size and specification. The job also includes P/F of ISMB 300 at the bottom of sump for resting of the motors of submersible pumps.Total weight=1750 kg |
| 4 | Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable (Power cable, control cable, instrumentation cable each 100-meter length), ultrasonic level transmitter (0-10 Mtr), soft starter panel, duck foot pedestal etcType of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity= 300 M3/Hr Head = 20 meters or above Motor rating = 40-50 H.P 1450 rpm Make (Kirloskar/Xylum /Granfoss/Equivalent). |
| 5 | Providing fitting and testing of MS rising main 450 mm dia 5.4 mm thickness. |
| 6 | Providing fitting and testing of MS rising main 200 mm dia 5.4 mm thickness from IPS to main sewage sump of STP. The job includes P/F of MS bends, fabrication of easy bends, flanges, rubber gaskets nut and bolts etc for successful execution of work at site. |
| 7 | Providing fitting and testing of MS rising main 100 mm dia 5.4 mm thickness. The job includes P/F of MS bends, flanges etc for successful execution of work at site. |
| 8 | Providing fitting and testing of 200 mm dia D.I.sluice valves. |
| 9 | Providing fitting and testing of 100 mm dia D.I.sluice valves. |
| 10 | Providing fitting and testing of 200 mm dia D.I.Non return valves. |
| 11 | Providing fitting and testing of 450 mm dia C.I sluice valves. |
| 12 | Providing fitting and testing of MCCB 630 Amp (02 nos) fitted in powder coated M.S cubical enclosure with copper bus bars. Please Enable Macros to View BoQ information |
