|
| 1 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by by Engr-in-charge. |
| 4 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by by Engr-in-charge. |
| 5 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework and precast concrete articles and precast concrete block walling complete all as specified and as directed by by Engr-in-charge. |
| 6 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 7 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 8 | Dismantling of wall and ceiling boards(fiber,pulp,insulation,etc.) or insulation boards/slabs/blankets,any thickness,including cover fillets |
| 9 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed |
| 10 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 11 | M&L RCC (Nominal mix) Type B-1 1:2:4 (20 mm graded aggregate)as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like and similar articles including form works complete all as specified and as directed. |
| 12 | M&L for formwork to chullah hoods, chajjas trough,beam,shelves and similar item including edges for fair finished surface all as specified and directed. |
| 13 | M&L Mild steel bars TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 14 | M&L for Black Granite slab 18-20 mm thick rubbed and polished machine cut, set in cement mortar jointed with white cement complete including bedding layer 15mm thick in cement mortar 1:6 over rcc platform/shelves & making hole for gas pipe if required etc through precast RCC slab & granite stone etc incl rounding of exposed edges, complete all as specified.Note:- Colour of Granite approved by the direction of Garrison Engineer. |
| 15 | M&L Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed .. |
| 16 | S&F in repairs 2.8-3mm thick Polycarbonate sheet fixed to metal frame with suitable fixing arrangment complete all as specified and directed. |
| 17 | M&L for preparing new or old previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 18 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc |
| 19 | All as per Item No. 19 above, but fixing only |
| 20 | S&F for rolled mild steel sections as in column main and joist, channel, angle, or tee sections, fixed independently etc. (cut to ordinary lengths i.e. within 20mm of the length indicated, fixed with angle cleats or other connecting plates of Fe 410-W (Gde E-250) quality A complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified by the manufacturer and as per directions of Engineer-in-chargeNote: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made complete all as specified and as directed. |
| 22 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 23 | S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified. |
| 24 | S&F stainless steel handle of size 200mm size long complete all as specified. |
| 25 | S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified. |
| 26 | S&F stainless steel of AE - SI 316 grade barrel tower bolt 200 mm long , extruded sections complete all as specified. |
| 27 | S&F stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified. |
| 28 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 29 | S&F Plain, galvanised,galvalume zinc coating steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 of 0.63mm thick |
| 30 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 31 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 32 | M&L for preparation of newly plastered surfaces of wall, projected face of chajja, projected face of roof slabs & face and sides of sunshade including preparation of surfaces including cornices, plasters etc complete and applying two coat of exterior emulsion paint in pattern (two or more colour combination) over one coat of exterior primer applied complete all as specified and as directed by the Engr-in-Charge. (Note : Design, pattern & colour will be approved by the GE)Notes: (i) Camouflaging pattern will be approved by the GE.(ii) Work shall be executed Upto 10 mtr high .(iii) All Safety measures for the safety of workmen shall be ensured by the contractor. Insurance of workers shall also be got done by the contractor before execution of work |
| 33 | M&L Rendering 10 mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 34 | M&L preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over 2-3 mm thick wall care putty complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 36 | S&F Powder coated Anodised aluminium window and ventilator sliding type without sash bars, aluminium sections weighing 0.55 kg/m including ,necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified |
| 37 | S&F M&L 4.8 mm tinted/frosted sheet galss ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-charge. |
| 38 | S&F in repairs Door closer hydraulically regulated aliminium (Die cast ) body regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. |
| 39 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded agg) for plinth protection etc complete all as specified. |
| 40 | M & L PCC 1:2:4 type B-0 (using 12.5mm graded agg) for sub base of floor etc complete all as specified. |
| 41 | M&L for Virified Ceramic tiles light colour double charged size 595X595X 8-10 mm thick (square) polished, in floors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to laying over & including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 42 | M&L for Virified Ceramic tiles light colour double charged size 595X595X 8-10 mm thick (square) polished, on vertical surfaces, such as Skirting, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed. |
| 43 | M&L for non skid cereamic coloured tiles 400X400X 7mm to 8mm thick (square) in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match all as specified & directed laying over & including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 44 | M&L glazed, coloured, ceramic, tiles of size (450mm x 300 mm) x 6 to 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed. |
| 45 | S & F 8 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) |
| 46 | M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 47 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 48 | M&L Preparation of plastered or unplastered new surfaces of ceiling and applying two coat of OBD white or tinted on ceiling over a coat of chalk whiting on plastered surfaces ,preparatory to distempering complete all as specified and as directed by Engineer-in-Charge. |
| 49 | M&L Second class soft wood in Scantling and including taking down old and decayed timber complete all as specified and as directed. |
| 50 | M&L 2nd class soft-wood Plain,of sectional area exc 13 & n exc 25 Sq.cm fillets square, rectangular or triangular in section clean sawn, secured with nails or brads including taking down old and decayed timber complete all as specified and directed. |
| 51 | S & F in repair 8-9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws/nails to timber frame work including dismantling old decayed boards complete all as specified and as directed by Engr-in-charge. |
| 52 | M&L 3-layer PP-R (Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 53 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 54 | Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. Complete. |
| 55 | Supply and fixing in repair 110mm PVC (SWR) bends of any radius complete. |
| 56 | Supply and fixing in repair 75mm PVC (SWR) bends of any radius complete. |
| 57 | Supply and fixing in repair 75 mm PVC (SWR) junction single T equal or unequal with acccessible door complete. |
| 58 | Supply and fixing in repair 110mm PVC (SWR) vent cowl complete. |
| 59 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints,fixed to wall including all connections & fittings complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repairs Vitreous China counter sunk wash basin, white, embedded in granite counter toip and making good the opening, peroper alignment and sealing, size 550x400mm supply and fixing of waste pipe with and including 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc, complete all as specified and as directed. |
| 63 | S&F in repairs Vitreous China coloured squatting pan, ‘Orissa’pattern, size 580 x 440 mm with integral foot rests including all connection ,flushing pipe, anti-syphonage pipe, including other CI fittings wherever required etc.,complete including making good to floor etc, complete all as specified and as directed by Engeer in chargeNote: Qty and Rates are inclusive of CI P and S trap. |
| 64 | S & F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets float and handle, and bracket all as specified & directed. |
| 65 | S&F in repair fancy type bib taps,15 mm bore cast copper alloy Chromium plated with half turn handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repair Pillar taps,15 mm bore fancy type cast copper alloy, with capstan heads,chromium plated ,screwed down high pressure, half turn handle with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc, complete all as specified and as directed by Engeer in charge |
| 67 | S&F in repair Stop valves / angle valve, 15 mm bore fancy type chromium plated cast copper alloy, screwed down,high pressure,with half turn handle, screwed both ends for iron pipe or for unions and fixed etc, complete all as specified and as directed by Engeer in charge |
| 68 | S&F in repair PPR 20mm bore, globe or gate valves, with iron wheel head, screwed both ends for PPR and fixed |
| 69 | S&F in Repairs framed mirror of size 1800X 600 x 5mm thick of selected quality glass fixed to wall complete all as specified and directed. |
| 70 | S&F in Repairs framed mirror of size 600X 450 x 5mm thick of selected quality glass fixed to wall complete all as specified and directed. |
| 71 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge. |
| 72 | S & F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats all as specified & directed. |
| 73 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, etc, complete all as specified and as directed by Engr-in-Charge. |
| 74 | S&F in repairs fancy type Premium quality Chromium plated Soap Dish Square or Rectangular etc, complete all as specified and as directed by Engeer in charge |
| 75 | S&F 75mm PVC(SWR) floor trap plain with grating including jointing to waste pipe fixed complete all as specified and as directed. |
| 76 | S&F 150 x 100 mm dia SW Gully trap setting and jointing with cement mortar 1:1 etc, complete all as specified and as directed. |
| 77 | S&F in repair Grating down 100 mm dia of PTMT 9 minimum weight 25 gm all as specified & directed. |
| 78 | S&F in repair stainless steel curtain rod chromium plated with fixing brackets, stops, rollers etc. |
| 79 | S&F in repair 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified & directed. |
| 80 | S&F in repair 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule all as specified & directed. |
| 81 | S&F A Bukhari hole made our of 100 mm dia steel pipe 1.20 mtr length,fabricated from 4 mm thick steel sheet, complete with four supporting legs of 0.30 m length for proper stability. Bukhari pipe shallmbe fixed in position using screws and epoxy filling only the joints with sheets work incl cutting of hole in existing GI sheet to suit the pipe size and proper installation & Item shall also incl,Providing and fixing of top cover and providing hook arrangement for proper closing complete in all respects as directed |
| 82 | S&F premium Stainless Steel peg set 6-Pin Cloth Hanger Heavy-Duty Wall Mount Hook Rack for Clothes etc to fix on wall complete all as specified and as directed. |
| 83 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including there fitting such as switches, ceiling roses, pendants, light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 84 | M&L for point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping/ conduit to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including PVC flush boxes of anyway (as per site requirement) for mounting switches, sockets, regulators etc for fixing one light/fan/exhaust fan point controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing whitewash color surface complete all as specified and directed. Notes : Wiring shall be done by using proper colour coding. |
| 85 | all as per item No 84 here-in-before but one 5pin, 5/6 Amp socket outlet on same board complete all as specified and directed. |
| 86 | all as per item No 84 here-in-before but one 5pin, 5/6 Amp socket outlet independent complete all as specified and directed. |
| 87 | all as per item No 84 here-in-before but for one 5 pin socket outlet 15/16 Amps on independent board with cables 2.5 sqmm for phase and earth wire of size complete all as specified and directed. |
| 88 | S&F Switch one way 5/6 Amp complete all as specified and directed. |
| 89 | S&F Socket, 6A - 2 in 1 3/5 pin complete all as specified and directed. |
| 90 | S&F Switch Socket combined 15/16 Amp complete all as specified and directed. |
| 91 | S&F Lamp Holder insulated body with back plate for batten fitting including 9 watt LED bulb complete all as specified and directed. |
| 92 | S&F ceiling rose, three terminal surface type complete all as specified and directed. |
| 93 | S & F of LED lights fitting 4 feet, 20W, 220V, AC, batten type including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose having luminaire lumen >2000 lm complete all as specified and directed. |
| 94 | S & F of building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose complete with GI light grade not less than 1.2 mtr long bend to shape including pole clamps suitable for fixing of GI pipe on the wall with nut bolt & washers all as specified and directed. |
| 95 | supply and Fix LED Bulk Head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP66 complete all as specified and directed. |
| 96 | Supply and fixing in replacement of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with MCBs as required complete all as specified. |
| 97 | Supply and fixing in replacement of MCB distribution board SPN 240 Volt 4 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with MCBs as required complete all as specified. |
| 98 | S & F in replacement of Sheet metal enclousers, VTPN Distribution board 4 way 415 V, double door complete with 100 Amp rated bus bar and neutral link earthing fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. |
| 99 | S &F in replacement of MCB SPN, 240V, 10KA 'C' curve, current carrying capacity 40 Amp fixing in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 100 | S&F in replacement of MCB SP, 240V, 10 KA 'C' curve, current carrying capacity 10 to 32 Amp fixing in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 101 | S&F, wall mounted fan 400mm sweep, oscillating arreangement, inbuilt speed control and ON-OFF switch arrangement, etc complete all as specified and dierected. Please Enable Macros to View BoQ information |
| 102 | S&F, wall mounted fan 400mm sweep, oscillating arreangement, inbuilt speed control and ON-OFF switch arrangement, etc complete all as specified and dierected. Please Enable Macros to View BoQ information |
