|
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 Sqm and exc 50 mm and n exc 100 mm deep complete all as specified and as directed. |
| 2 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed. |
| 3 | Demolition of Concrete (unreinforced)in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as secified and as directed. |
| 4 | M&L for two layers of 75 mm thick (compacted thickness) WBM with granite coarse aggregate of grading 2 (63 to 40 mm size ) spread , rolled and consolidated to gradient and camber required complete all as specified and as directed. |
| 5 | M&L for Preparing surfaces by brushing with wire brushes for removing caked mud etc.,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed. |
| 6 | M&L for applying evenly a tack coat with bituminous primer using paving bitumen VG-10 at 10 kg per 10 sqm complete all as specified and as directed. |
| 7 | M &L for Paving Bitumen and Penetration ,macadam 4%, laid/rolled and compacted torequired gradient and camber (consolidated thickness 75mm or less) complete all as specified and as directed. |
| 8 | M&L for Applying evenly a priming/tack coat with bituminous primer at 2.5 kg per 10 sq metre complete all as specified and as directed. |
| 9 | M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen at 5 kg /10 sqm complete all as specified and as directed . |
| 10 | M&L for Bituminous premixed carpet, 4 cm consolidated thickness, with 0.53 cu.m. of stone chippings mixed with 29.20 kg of binder, rolled and compacted to required camber and gradient complete all as specified and as directed. |
| 11 | M & L for Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface complete all as specified and as directed. |
| 12 | M&L for 75 mm light wearing surfaces with moorum/ red bajri spread, rolled and consolidated to required gradient and camber complete all as specified and as directed.. |
| 13 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to (BS 3262-1989) with special applicator machine all as per manufacturers instruction complete all as specified and as directed. |
| 14 | M and labour for PCC (1:2:4) type B-1 (20 mm graded stone aggregate) Providing, cement concrete as in kerbs stone or mud stops, rounded or chamfered on edges complete all as secified and as directed. |
| 15 | M & L for PCC (1:2:4) type B-1 (40 mm graded stone aggregate) Cement concrete in surface channels and drains including demolition of existing drain complete all as specified and as directed. |
| 16 | M&L for Extra for forming fair finished to drain or channel 30 cm inner girth in cement including forms, mould mitred/stopped ends etc.complete all as specified and as directed. |
| 17 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed. |
| 18 | S&F metal tubular delinator made out of ABS round body fitted with 2 nos 65 mm dia highly reflective reflector made out of PMMA and mounted on 45/50 mm dia mild steel pipe 600 mm height duly power coated and thermo plastic elastomer 3 bands of green , red , yellow reflector radium tape 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) (150x150x300 mm) type B1 complete all as specified and as directed. |
| 19 | Supply and Fix Polycarbonate Convex mirror (80Cm) Make 3M and equivalent in AUTOMAT/ACE/DARK EYE/ISI marked polycarbonate body mounted on 16 gauge Ms pipe of 75mm outer dia fixed 1.5m above ground surface and 60cm below ground including PCC foundation of size 30X30X30 Cm with PCC (1:3:6) type C1 bottom part MS pipe welded with 5mm thick (125x125) MS pipe for anchorage in PCC, MS pipe shall be painted stove anameled paint over a caot of red oxide, including necessary earth work excavation in any soil removal and disposal of spoil, complete all as specified and as directed.( Note:- Convex mirror shall be as per sample) |
| 20 | S&F in repair Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and as directed. |
| 21 | S&F cat eye solar reflective type of metal body alloy of size (100mmX100mmx20mm) with PAMA striplens reflector of modal No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instruction ccomplete all as specified and as directed. Please Enable Macros to View BoQ information |
