|
| 1 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete DSR 8.31 |
| 2 | Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer in-charge: DSR 10.14 |
| 3 | Profile B DSR 10.14.1 |
| 4 | Fixing with adjustable lugs with split end tail to each jamb DSR 10.14.1.1 |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : DSR 13.62 |
| 6 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 |
| 7 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 15.56 |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved DSR 15.60 |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : DSR 21.1 |
| 10 | For fixed portion DSR 21.1.1 |
| 11 | Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.1.2 |
| 12 | Dismantling of wooden storage cabinet including chowkhats, shutters, holdfasts etc ( Front section shall be measured for payment ) including stacking the serviceable material and removing the rubbish and disposing off it to approved dumping ground to the entire satisfaction of engineer in charge . NS |
| 13 | Dismentling of ceramic wall tiles carefully and scraping the plaster to making the surface clean for refixing the glazed tiles inlcuding removing of malba complete in all respect. NS |
| 14 | Providing and fixing cupboard shutter consisting of 18mm thick HDHMR board exterior grade in existing frame with 4nos SS hinges, exposed edge finished with matching tape. The rate further includes cost of laminate on both sides, SS handle 4\\" ,magnetic catcher, screws complete in all respect to the entire satisfaction of Enginner in charge. NS |
| 15 | Providing and fixing 18mm thick (ISI marked) HDHMR board exterior grade shelf in existing cup board, Matching Tape with sunmica on exposed edges including nail, screw and fevicol etc. complete in all respect to the entire satisfaction of Enginner in charge. NS |
| 16 | Providing and fixing 30mm Flush Door shutter in existing MS door frame. The cost further includes removing board/flush door in existing door frames and repair to MS section for proper fitting and replacement of hinges if required complete in all respects and to the entire satisfaction of Engineer-in-charges. NS |
| 17 | Providing and fixing 0.5 mm thick aluminium sheet at the bottom of washroom door complete in all respect and to the entire satisfaction of engineer in charge. NS Please Enable Macros to View BoQ information |
