|
| 1 | Construction of RCC over head storage tank of 40000 Ltrs. Capacity (2 Nos) with 10.00 mtrs. Staging height from groud level to bottom of dome slab comprising of inlet, scour & over flow pipes as per details given below from ground level to tank including bends of required degrees, valves of required size conforming to relevant codes RCC Sprial 1.0 wide stair case/ MS stair case including GMS pipe railing as per IS specification, steel ladder 45 cms. wide of usual height as per site requirement, SFRC manhole cover (medium duty) of 500mm dia and weight of frame and cover should not be less than 110 kg. ventilator at top dome with minimum opening of 90x90cms. water level indicator including floats and measuring gauge, lightening conductor with earthing arrangement etc. The RCC over head reservoir shall include randering/plastering of the uneven expose surface, two coats of snowcem paint and any other component requuired for the completion of the job to the entire satisfaction of Engineer-in-Charge. The offers shall also include detail structural drawing/ design calcualtions to be approved by the competent authority based on the raft foundation by taking seismic forces in the design calculation expension joints as required at site. The offer shall also inclcude the cost of providing and fixing of Gms/MS pipes, and valves/ fittings complete including duck foot bends, puddle collars, expansion joints etc. connecting with rising main & distribution main with required length from the edge of foundation and any other components required for the completion of job upto the entire satisfaction of the Engineer-in-Charge. Dia of piping arrangement:-Inlet Pipe =100 mm Dia Outlet pipe = 100 mm G.I. pipe Scour pipe =Not less than 100 mm dia G.I. pipe. |
| 2 | Removal of choked filter media from filter bed upto a lead of 20mtrs and disposing of unserviceable material stacking the serviceable material and neatly dressing in all leads and lifts complete in all respect. |
| 3 | Prov. form work of ordinary timber plankings so as to give a rough finish i/e centring, shuttering, strutting & propping etc. ht. of propping & centring below supporting floor to ceiling not exceeding 4 mts. & removal of the same for insitu-reinforced concrete & plain concrete work in :- Vertical Walls |
| 4 | Providing & laying cement concrete 1:1.5:3 (1 cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for RCC work in: Vertical Wall |
| 5 | Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level :complete in all respect. |
| 6 | Precast concrete block masonry in partitions walls 10 cm. thick with solid blocks of approved size i/c quion block closer etc. made of cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 40 mm nominal & down gauged) in CM 1:3 (1 cement: 3 Sand) |
| 7 | Providing placing in horizontal layers old filtering media dully graded, screened, washed and cleaned as specified by the Engineer in Charge. Top Layer: Fine Sand (Eff. Size 0.20mm to 0.40mm and uniformity coefficient 2.00 to 3.00) |
| 8 | Providing placing in horizontal layers old filtering media dully graded, screened, washed and cleaned as specified by the Engineer in Charge. Second Layer: Coarse Sand 3mm-6mm (new) |
| 9 | Providing placing in horizontal layers old filtering media dully graded, screened, washed and cleaned as specified by the Engineer in Charge. Third Layer: Bajri 6mm to 20mm |
| 10 | Providing placing in horizontal layers old filtering media dully graded, screened, washed and cleaned as specified by the Engineer in Charge. Fourth Layer: Bajri 20mm to 25mm |
| 11 | Providing placing in horizontal layers old filtering media dully graded, screened, washed and cleaned as specified by the Engineer in Charge. Fifth Layer: Broken stone 50mm to 75mm |
| 12 | Cleaning of filter beds with pressure of water by shifting of C.C tiles and relaying of tiles complete. |
| 13 | Removal of silt/wet malva including bailing saturated nsoil from percolation well but excluding boulders and rocky portion required blasting upto a distance of 20 mtr disposing of unserviceable materials and neatly dressing the surface within all leads and lifts as per the direction of Engineer in charge. |
| 14 | Providing and Laying cement concrete 1:2:4 (one cement two sand four graded stone aggregate 20 mm normal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts as per direction and to the entire satisfaction of Engineer-In-Charge. |
| 15 | Providing and laying cement concrete work 1:2:4 (1cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- Suspended floors, roofs, landings and shelves and their supports, balconies, beams,griders bressumers and cantilevers upto all floor level. |
| 16 | Steel work welded in built up section, trusses & frames work i/c cutting hoisting, fixing in position & applying a priming coat of red lead paint and two coats of synthetic enamel paint :- in grating, framed guard, bars, ladders, railing, bars, bracket & similar work. complete in all respect. |
| 17 | Supply and fixing galvanised steel barbed (IS:278-1962 Type-1) weighting 9.38Kg.per 100 meters minimum) straining and fixing to any type of standard rails straining bolts including securing with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (Posts and struts) of wood concrete, steel etc. and straining bolts shall be paid for separately) within all leads & lifts. |
| 18 | 20 mm cement plaster in single coat on rough side of brick/stone masonry for interior pilaster upto floor two level i/c carries internal rounded chamber and rounded angle not exceeding 80 mm girth and finished even and smooth in cement mortar 1:6 (1 cement:4 sand) Complete in all respect. |
| 19 | Providing and fixing MS steel cover for Chambers of size (0.60*0.60) mtr incliuding frame work ie. Angle section 35x35x3mm thick, MS Sheet 1.00 mm thick, Welding work & Locking arrangement complete in all respect as per direction of Engineer in Charge. |
| 20 | Cement concrete flooring 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement (40mm thick) in all leads and lifts. |
| 21 | Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement: 6 sand) in all leads and lifts. |
| 22 | Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood in all leads and lifts. |
| 23 | Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40mm thick in all leads and lifts. |
| 24 | Prov. & fixing wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85 G. with wire of dia. 0.56 mm for doors, windows & clerestrey windows including bright finished black enameled iron hinges with necessary screws. |
| 25 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain. - Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness. |
| 26 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain. - Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cantilevers, bressumers 1.00 mts. In depth in all heights from floor. |
| 27 | 6 mm cement plaster to ceiling in CM 1:3 (1Cement :3 Sand) |
| 28 | Applying two coat of wood preservative on new wood based surface after and including preparing the surface by thoroughly cleaning dirt, dust and other foreign matter. |
| 29 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts. |
| 30 | Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. |
| 31 | White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts. |
| 32 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 33 | Providing and fixing M.S.fan clamp(Type-1 of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. |
| 34 | Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm ((1:3:6(1cement:3sand:6 graded stone aggregate 20mm nominal size. |
| 35 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete - Sliding door bolts 250 x 16mm. |
| 36 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete - M.S. tower bolts (Barrel type) leads and lifts. 200 x10 mm. |
| 37 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete - M.S. tower bolts (Barrel type) leads and lifts. 150 x10 mm. |
| 38 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete - M.S. handles 125mm dia |
| 39 | Providing and fixing of MS round bars in windows and ventilators. |
| 40 | Providing for installation of Electric wiring fitting in pump house and providing fixing 1 No electric ceiling fan as per direction of Enfineer in Charge within all leads and lifts. Please Enable Macros to View BoQ information |
